TCVN 6561-1999 Radiation protection for medical installations using X-ray machine《使用X射线机的医疗设施辐射防护》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 4306 Teil 1-1991 End mills with parallel shank suitable for automatic resharpening - Dimensions - Marking of conformity《用于自动重磨的直柄铣削刀具 尺寸 合格标识》.pdf

ONORM M 4306 Teil 2-1991 End mills with parallel shank suitable for automatic resharpening - Technical delivery conditions《用于自动重磨的直柄铣削刀具 技术交货条件》.pdf

ONORM M 4309-1994 Shell milling machine arbors - Inside coolant system - Interchangeability dimensions《套式铣刀轴 内部冷却系统 互换性尺寸》.pdf

ONORM M 4319-1984 Screwing taps technical speciflcations for ground high-speed steel taps《旋拧丝锥 地面高速钢带尺的技术规范》.pdf

ONORM M 4320-1984 Sets of taps sets of 3 taps for metric coarse ISO-threads Ml up to M68《丝锥集合 M1 至 M68 公制 ISO 标准螺纹的三部分组成的丝锥集合》.pdf

ONORM M 4321-1984 Sets of taps sets of 2 taps for metricfme coarse ISO-threads with diameters 1 mm up to 52 mm《丝锥集合 公制直径1毫米最多52毫米的粗和细ISO 螺纹的丝锥集合》.pdf

ONORM M 4322-1985 Sets of taps sets of 2 taps for pipe threads G- i6 to G4 and Rp- w to Rp4《丝锥集合 管螺纹 G1 16 至 G4 和 Rp1 16 至 Rp4 的两部分组成的丝锥集合》.pdf

ONORM M 4325-1985 Machine taps for metric ISO coarse threads M1 6 to M68《公制ISO 粗螺纹Ml 6 至 M68的机用丝锥》.pdf

ONORM M 4326-1986 Machine taps for flne pitch metric ISO-fine threads Ml 6 to M52《小螺距公制 ISO 细螺纹Ml 6 至 M52的机用丝锥》.pdf