TCVN 6611-8-2000 Printed boards Part 8 Specification for single and double sided flexible printed boards with through connections《印制板 第8部分 有贯穿连接的单双面挠性印制板规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NBN EN 742-1994 8125 Identification card systems - Intersector ID-1 card location of contacts for cards and devices used in Europe《识别卡系统 内插卡ID-1 的接触位置及在欧洲使用的组合设备》.pdf

NBN EN 743-1994 2500 Plastics piping and ducting systems - Thermoplastics pipes - Determination of the longitudinal reversion《塑料管道和导管系统 热塑管 纵向复原的测定》.pdf

NBN EN 747-1-1993 5625 Furniture - Bunk beds for domestic use - Part 1 Safety requirements《家具 家用折叠床 第1部分：安全要求》.pdf

NBN EN 747-2-1993 8750 Furniture - Bunk beds for domestic use - Part 2 Test methods《家具 家用折叠床 第2部分：实验方法》.pdf

NBN EN 761-1994 8125 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes Determination of the creep factor under dry conditions《塑料管道系统 使用玻璃强化的热固性塑料管 干燥条件下挤压.pdf

NBN EN 763-1994 3750 Plastics piping and ducting systems Injection-moulded thermoplastics fittings Test method for visually assessing effects of heating《塑料管道和通道系统 液体浇注形成的热塑性衔接 便于直观.pdf

NBN EN 764-1994 6250 Pressure equipment - Terminology and symbols - Pressure temperature volume《压力设备 术语和符号 压力，温度和体积》.pdf

NBN EN 765-1994 5000 Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only《食品运输用口袋 仅聚丙烯出外的其它聚烯烃物编织的口袋》.pdf

NBN EN 766-1994 3750 Sacks for the transport of food aid - Sacks made of jute fabric《食品运输袋 黄麻织物袋》.pdf