TCVN 6627-3-2010 Rotating electrical machines Part 3 Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines《旋转电机 第3部分 用蒸汽涡轮机或燃气涡轮机驱动的同.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 81969 5-2015 INSTALLING TOOLS CONNECTOR ELECTRICAL CONTACT (FORK TYPE CRIMP REMOVABLE) TYPE I CLASS 1 COMPOSITION A.pdf

SAE AS 81969 6-2015 REMOVAL TOOLS CONNECTOR ELECTRICAL CONTACT (TYPE CR CONNECTOR) TYPE II CLASS 1 COMPOSITION A.pdf

SAE AS 81969 8A-2016 INSTALLING AND REMOVAL TOOLS CONNECTOR ELECTRICAL CONTACT TYPE I & II CLASS 2 COMPOSITION A.pdf

SAE AS 81969 9-2015 REMOVAL TOOL CONNECTOR ELECTRICAL CONTACT TYPE II CLASS 1 COMPOSITION A.pdf

SAE AS 81969-2011 Installing and Removal Tools Connector Electrical Contact General Specification For《安装拆卸工具及连接器电触头的通用规格说明》.pdf

SAE AS 82819 1-2013 BEARINGS PLAIN SELF-ALIGNING SELF-LUBRICATING 300 CPM (13 FPM) OSCILLATION -65 TO +160 LINERS LESS THAN 015 INCH THICK《衬垫小于0 015英寸、-65至+160℉、300 cpm (13 fpm)振荡自动润滑自动校准的.pdf

SAE AS 82819-2013 Bearings Plain Self-Aligning Self-Lubricating 300 cpm Oscillation (13 fpm) -65 to +160 (-54 to +71 Liners Less Than 0 015 inches《衬垫小于0 015英寸、-65至+160℉(-54至+71℃)3.pdf

SAE AS 82B-1996 Screw Thread Form American National Modified (National Round - NR)《美国国家螺钉螺纹形式 修订版(国家范围-NR)》.pdf

SAE AS 83248 1A-2016 O-ring Molded from AMS7276 Material.pdf