TCVN 6721-2000 Safety of machinery Minimum gaps to avoid crushing of parts of the human body《机械安全 避免人体各部位挤压的最小间距》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2563-2007 Standard Test Method for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method《用板计数法计算水性金属加工液中非结核分枝杆菌的标准试验方法》.pdf

ASTM E2563-2013 Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method《用平皿计数法计数含水金属加工液中非结核杆菌的标准实施规程》.pdf

ASTM E2563-2018 Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method.pdf

ASTM E2564-2007 Standard Test Method for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method《用直接显微镜计数(DMC)法进行金属加工液中分支杆菌计数的标准试验方法》.pdf

ASTM E2564-2011 Standard Test Method for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method《通过直接显微镜计数列举金属加工流体中的分枝细菌的标准试验方法》.pdf

ASTM E2564-2013 Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method《用直接显微镜计数(DMC)法进行金属加工液中分支杆菌计数的标准实施规程》.pdf

ASTM E2564-2018 Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method.pdf

ASTM E2565-2009 Standard Guide for Consensus-based Process for an Occupational Safety and Health Standard that Includes an Occupational Exposure Guideline《包括职业接触准则的职业安全及健康标准用基于共识处理.pdf

ASTM E2565-2015 Standard Guide for Consensus-based Process for an Occupational Safety and Health Standard that Includes an Occupational Exposure Guideline《包括职业暴露指南的职业安全和健康标准用基于共识处理.pdf