TCVN 6801-2001 Surgical instruments Non-cutting articulated instruments General requirements and test methods《外科器械 非切割铰接器械 一般要求和试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16838-1971 Parts and products of wood and wooden materials Method for determination of paint coatings hardness《用木材和木质材料制的零件和制品 漆层硬度测定法》.pdf

GOST 16839-1971 Scintillation detector units of ionizing radiation Basic dimensions《电离辐射闪烁探测组件 基本尺寸》.pdf

GOST 16840-1978 Pinned wire Design and dimensions《针铜 设计和尺寸》.pdf

GOST 16841-1979 Fan holes of devices frames of radioelectronic and electrotechnical products Types structure and dimensions《无线电电子和电工仪表外壳上的通风孔 型式，结构和尺寸》.pdf

GOST 16844-1993 Vibration Requirements for testing mechanical hammers《振动 机械锤的试验要求》.pdf

GOST 16851-1971 Liquid analysers Terms and definitions《液体特性和成分分析仪 术语和定义》.pdf

GOST 16853-1988 Steel tackle ropes for operational and deep probe boring Specifications《工作和深孔钻探用钢制滑车索 规范》.pdf

GOST 16855-1991 Auditorium arm-chairs Types and basic dimensions《演播厅用的座椅 型号及基本尺寸》.pdf

GOST 16858-1971 High-speed steel blades for shell counterbores Design and dimensions《套式扩孔钻用高速钢刀片 结构及尺寸》.pdf