TCVN 7246-2003 Health care solid waste incinerator Determination method of sulfur dioxides (SO2) concentration in fluegas《医疗用固体废物焚化炉 废气中二氧化硫(SO2)浓度的测定方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 15979-1970 Canned podded beans Specifications《罐头 有荚菜豆 技术条件》.pdf

GOST 1598-1996 Fireclay refractory products for blast furnaces Specifications《砌高炉用的耐火粘土砖 技术条件》.pdf

GOST 15981-1970 Apparatus for determining dropping temperature of phenolformaldehyde resins Specifications《苯酚甲醛树酯下降温度的测定装置 规范》.pdf

GOST 15982-1970 Levels with micrometrical feed of ampule Methods and means of veritification《安瓿的测微等级 验证方法》.pdf

GOST 15987-1991 Wooden bodied planes Specifications《木刨 技术条件》.pdf

GOST 15988-1980 Bevel and hypoid gears running testers Basic dimensions《伞齿轮滚动检测机 基本参数》.pdf

GOST 15990-1970 Biological preparations Concentrated aluminium-hydroxide formolized vaccine against erysipelas《生物制剂 猪抗丹毒病用的浓缩的氢氧化铝甲醛注射液》.pdf

GOST 15995-1970 Combined and universal machines Basic parameters and dimensions《木工加工用综合式和万能式木工机床 基本参数及尺寸》.pdf

GOST 160-1984 Spindles for spinning and twisting machines General specifications《纺纱机和捻丝机的纺纱轴 通用规范》.pdf