TCVN 7364-1-2004 Glass in building Laminated glass and laminated safety glass Part 1 Definitions and description of component parts《建筑玻璃 夹层玻璃和夹层安全玻璃 第1部分 零部件的定义和描述》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 9001-2015 en Quality management systems - Requirements《质量管理体系 要求(ISO 9001 2015)》.pdf

EN ISO 9004-2009 en Managing for the sustained success of an organization - A quality management approach《一个组织持续成功的管理 质量管理方法》.pdf

EN ISO 9012-2011 en Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests《气体焊接设备 吸气手工焊具 规范和试验》.pdf

EN ISO 9013-2017 en Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances《热切割-热切割分类-几何产品规范和质量公差》.pdf

EN ISO 9015-1-2011 en Destructive tests on welds in metallic materials - Hardness testing - Part 1 Hardness test on arc welded joints《金属材料焊接的破坏性试验 硬度试验 第1部分 弧焊接头的硬度试验》.pdf

EN ISO 9015-2-2011 8750 Destructive tests on welds in metallic materials - Hardness testing - Part 2 Microhardness testing of welded joints《金属材料焊接的破坏性试验 硬度试验 第2部分 焊接点的显微硬度测试》.pdf

EN ISO 9016-2012 en Destructive tests on welds in metallic materials - Impact tests - Test specimen location notch orientation and examination《金属材料焊接的破坏性试验 冲击测试 试样定位 切口定向和检查(ISO FD.pdf

EN ISO 9017-2013 en Destructive tests on welds in metallic materials - Fracture test《金属材料焊接的破坏性试验 断裂试验》.pdf

EN ISO 9017-2018 en Destructive tests on welds in metallic materials - Fracture test.pdf