TCVN 7370-1-2004 Soils quality Dissolution for the determination of total element content Part 1 Dissolution with hydrofluoric and perchloric acids《土质 总元素含量测定用分解性 第1部分 用氢氟酸和高氯酸进行分解.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 4538-1995 en Metallic Coatings - Thioacetamide Corrosion Test (TAA Test)《金属镀层 硫代乙酰胺腐蚀试验(TAA试验)(ISO 4538-1978)》.pdf

EN ISO 4541-1994 en Metallic and Other Non Organic Coatings - Corrodkote Corrosion Test (CORR TEST)《金属和其他无机覆盖层 腐蚀膏腐蚀试验(CORR 试验)(ISO 4541-1978)》.pdf

EN ISO 4543-1994 en Metallic and Other Non-Organic Coatings - General Rules for Corrosion Tests Applicable for Storage Conditions《金属和其他无机覆盖层 储存条件下腐蚀试验的一般规则(ISO 4543-1981)》.pdf

EN ISO 4545-1-2005 en Metallic materials Knoop hardness test Part 1 Test method《金属材料 努氏硬度试验 第1部分试验方法 ISO 4545-1-2005》.pdf

EN ISO 4545-1-2018 en Metallic materials - Knoop hardness test - Part 1 Test method.pdf

EN ISO 4545-2-2005 en Metallic materials Knoop hardness test Part 2 Verification and calibration of testing machines《金属材料 努氏硬度试验 第2部分 试验机的验证和校准 ISO 4545-2-2005》.pdf

EN ISO 4545-3-2005 en Metallic materials - Knoop hardness test - Part 3 Calibration of reference blocks《金属材料 努氏硬度试验 第3部分 参考块的校正 ISO 4545-3-2005》.pdf

EN ISO 4545-3-2018 en Metallic materials - Knoop hardness test - Part 3 Calibration of reference blocks.pdf

EN ISO 4545-4-2005 en Metallic materials - Knoop hardness test - Part 4 Table of hardness values《金属材料 努氏硬度试验 第4部分 硬度值表 ISO 4545-4-2005》.pdf