TCVN 7445-2-2004 Oil well cement class G Part 2 Test methods《油井水泥等级G 第2部分 试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 9465A-2002 PIN STRAIGHT HEADED 311 DIAMETER CRES UNS S66286《(R)UNS S66286直径为311的耐蚀钢直型有头销钉》.pdf

SAE AS 9466A-2002 PIN STRAIGHT HEADED 373 DIAMETER CRES UNS S66286《直径373耐蚀钢(R)直头销 UNS S66286》.pdf

SAE AS 9467A-2002 PIN STRAIGHT HEADED 436 DIAMETER CRES UNS S66286《直径436耐蚀钢(R)直头销 UNS S66286》.pdf

SAE AS 9468-1999 PIN STRAIGHT HEADED 497 DIAMETER AMS5735《 497直径AMS 5735带头直销钉》.pdf

SAE AS 9482B-2012 Washer Flat Steel AMS 6437 or AMS 6485 Diffused Nickel-Cadium Plated Countersunk《扩散的镍镉镀层埋头孔AMS 6437或AMS 6485扁钢垫圈》.pdf

SAE AS 9486-1999 PIN STRAIGHT HEADLESS C AMS5132 LOCK《锁FSC 5315无头直销 AMS 5132》.pdf

SAE AS 9489D-2015 BOLT MACHINE - HEXAGON HEAD FULL SHANK CORROSION AND HEAT RESISTANT STEEL UNS S66286 130 KSI MIN 1900-32 UNJF-3A.pdf

SAE AS 94900-2007 Aerospace - Flight Control Systems - Design Installation and Test of Piloted Military Aircraft General Specification For《航空航天飞行控制系统设计、安装和军用飞行器试飞行的通用规范》.pdf

SAE AS 9490A-2004 Bolt Machine Hexagon Head Full Shank Corrosion and Heat Resistant Steel UNS S66286 130 ksi min 250-28 UNJF-3A《最小为130 KSI 250-28 UNJF-3A型UNS N S66286 耐腐蚀和耐热钢全螺柱六角头.pdf