TCVN 7488-2005 Ergonomics Basic human body measurements for technological design《人类工程学 技术设计用基本人体测量》.pdf

相关资源

CH T 1004-1999 测绘技术设计规定.pdf

GB T 5703-1999 用于技术设计的人体测量基础项目.pdf

GB T 5703-2010 用于技术设计的人体测量基础项目.pdf

CH T 1004-2005 测绘技术设计规定.pdf

GB T 5703-2010 用于技术设计的人体测量基础项目.pdf

YSJ 015-1992 有色金属冶炼厂收尘技术设计规定.pdf

CH T 1004-2005 测绘技术设计规定.pdf

GB T 5703-1999 用于技术设计的人体测量基础项目.pdf

[工程类试卷]注册测绘师测绘管理与法律法规（测绘项目技术设计）模拟试卷1及答案与解析.doc

EN 1997-1-2004 en Eurocode 7 Geotechnical design - Part 1 General rules (Incorporates Amendment A1 2013)《欧洲法规7 土木技术设计 第1部分 总则》.pdf

猜你喜欢

GOST 20862-1981 Adjusting fixturing hexahedral supports with theaded end and hole Design and dimensions《有螺纹尾端和孔的六角固定安装支架 结构和尺寸》.pdf

GOST 20863-1981 Adjusting fixturing rings supports with a flat threaded end and hole Design and dimensions《有螺纹尾端和孔的带平座圆固定安装支架 结构和尺寸》.pdf

GOST 20864-1981 Adjusting fixturing ring supports with slit theaded end and hole Design and dimensions《有螺纹尾端和孔的带槽园固定安装支架 结构和尺寸》.pdf

GOST 20865-1981 Adjusting fixturing hexahedral supports with threaded holes Design and dimensions《有螺纹孔的六角固定安装支架 结构和尺寸》.pdf

GOST 20866-1981 Adjusting fixturing ring support with flats and threaded holes Design and dimensions《有光平面和螺纹孔的圆固定安装支架 结构和尺寸》.pdf

GOST 20867-1981 Adjustings fixturing ring with a slit and threaded holes Design and dimensions《有槽和螺纹孔的圆固定安装支架 结构和尺寸》.pdf

GOST 20868-1981 Adjusting fixturing supports Technical requirements《固定安装支架 技术要求》.pdf

GOST 20872-1980 Contour turning tools with mechanically clamped cemented carbide indexible inserts Design and dimensions《机械夹固的多面硬质合金刀片外缘用组装车刀 结构及尺寸》.pdf

GOST 20874-1975 Combined turning and boring tools with mechanically clamped cemented carbide indexible inserts Design and dimensions《机械夹固的多面硬质合金刀片组装刨刀 结构及尺寸》.pdf