TCVN 7533-2005 Truck and bus tyres Verifying tyre capabilities Laboratory test methods《卡车和公共汽车轮胎 轮胎性能验证 实验室试验方法》.pdf

相关资源

GB T 2977-1997 载重汽车轮胎系列.doc

JT T 303-1996 汽车轮胎使用与维修要求.pdf

GB T 19389-2016 载重汽车轮胎滚动周长试验方法.pdf

GB T 33830-2017 载重汽车轮胎雪地抓着性能试验方法.pdf

GB T 7036.1-2009 充气轮胎内胎.第1部分 汽车轮胎内胎.pdf

SN T 1053-2002 出口住房式汽车轮胎检验规程.pdf

GB T 2977-2016 载重汽车轮胎规格、尺寸、气压与负荷.pdf

GB 7036.1-1997 充气轮胎内胎 第1部分：汽车轮胎内胎.pdf

GB 9744-1997 载重汽车轮胎.doc

JIS D 4230-1998 汽车轮胎.doc

猜你喜欢

GOST 21580-1976 End countersinks with cylinder chucking for machining parts from light alloys Design and dimensions《轻合金零件加工用圆柱柄端面扩孔钻 结构及尺寸》.pdf

GOST 21581-1976 Tapered countersinks for machining parts for light alloys Design and dimensions《轻合金零件加工用锥形柄扩孔钻 结构及尺寸》.pdf

GOST 21582-1976 End countersinks with taper chucking for machining parts from light alloys Design and dimensions《轻合金零件加工用锥形柄端面扩孔钻 结构及尺寸》.pdf

GOST 21583-1976 Tapered carbide-tipped countersinks for machining parts from lignt alloys Design and dimensions《轻合金零件加工用硬质合金锥形柄扩孔钻 结构及尺寸》.pdf

GOST 21584-1976 Shell countersinks for machining parts from light alloys Design and dimensions《轻合金零件加工用套式扩孔钻 结构及尺寸》.pdf

GOST 21585-1976 Shell carbide-tipped countersinks for machining parts from light alloys Design and dimensions《轻合金零件加工用镶硬质合金刀片套式扩孔钻》.pdf

GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm Hole tolerance《加工直径3mm～80mm轻合金孔用扩孔钻 直径公差》.pdf

GOST 21600 17-1983 Ferrochrome Methods for the determination of chromium《铬铁 铬的测定法》.pdf

GOST 21600 18-1983 Ferrochrome Methods for the determination of total aluminium《铬铁 铝的测定法》.pdf