TCVN 7678-2007 Machine tools Test conditions for wire electrical-discharge machines (wire EDM) Terminology and testing of the accuracy《机床 电火花线切割机的试验条件 术语和精度检验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HG 2086-1991 S 101型硫酸生产用钒催化剂.pdf

HG 2087-1991 S 101-2H型硫酸生产用钒催化剂.pdf

HG 2088-1991 S 107、S 108型硫酸生产用钒催化剂.pdf

HG 2090-1991 B113型-氧化碳中温变换催化剂.pdf

HG 21598-1999（编制说明） 水平吊盖不锈钢人孔.pdf

HG 21599-1999（编制说明） 垂直吊盖不锈钢人孔.pdf

HG 21600-1999（编制说明） 椭圆快开不锈钢人孔.pdf

HG 21602-1999（编制说明） 平盖不锈钢手孔.pdf

HG 21603-1999（编制说明） 回转盖快开不锈钢手孔.pdf