TCVN 7799-2009 Standards of tourist guest house《游客宾馆的标准》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D714-A-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27 % MINERAL FILLED COLOR PIGMENTED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《27%矿物填充 内部着色的热塑性聚烯烃弹性体(TEO) 与福特.pdf

FORD WSK-M4D714-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27% MINERAL FILLED MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D715-A-2010 POLYAMIDE (PA) 46 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、30%玻璃纤维增强的聚酰胺46成型料 与标准FORD WSS-M99.pdf

FORD WSK-M4D715-A2-2010 POLYAMIDE (PA) 46 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、30%玻璃纤维增强的聚酰胺46成型料 与标准FORD WSS-M9.pdf

FORD WSK-M4D716-A-2005 POLYETHERIMIDE (PEI) MOLDING COMPOUND SELF-EXTINGUISHING TO BE USED WITH FORD WSS-M99P1111-A 《自熄灭型聚醚酰亚胺（PEI）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D716-A-2016 POLYETHERIMIDE (PEI) MOLDING COMPOUND SELF-EXTINGUISHING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D718-A-2010 POLYCARBONATE (PC) FILM TRANSLUCENT TO BE USED WITH FORD WSS-M99P1111-A 《透明的聚碳酸酯(PC)膜 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D1053-A1 福特WSS-M4D1053-A2]》.pdf

FORD WSK-M4D718-A4-2010 POLYCARBONATE + POLYBUTYLENE THEREPHTALATE (PC+PBT) BLEND FILM TRANSLUCENT TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯+聚对苯二甲酸丁二醇酯混合物(PC+PBT)混合物半透明薄膜 与标准FOR.pdf

FORD WSK-M4D719-A-2006 POLYAMIDE (PA) 66 38% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D823-A)《38%玻璃纤维 矿物增强的聚酰胺66成型料 与标准FORD.pdf