TCVN 7840-2007 Radioactive materials Packagings Tests for contents leakage and radiation leakage《放射性物质 包装 内容物和辐射的泄漏检验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 7079-1-2015 Pressure resistant circular glass-to-metal fused sight glasses - Part 1 For holders with recess《抗压力的圆形玻璃－金属熔融观察镜 第1部分 用于带槽面夹持装置》.pdf

DIN 7080-2005 Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature《低温范围内无限制的硼硅酸盐玻璃制抗压圆形视孔玻璃》.pdf

DIN 7081-1999 Pressure resistant oblong sight glasses of borosilicate glass without limitation in the range of low temperature《低温范围内无限制的抗压长方形硼硅玻璃观察镜》.pdf

DIN 711-2010 Rolling bearings - Single direction thrust ball bearings《滚动轴承 单向推力球轴承》.pdf

DIN 715-2011 Rolling bearings - Double direction thrust ball bearings n《滚动轴承 双向推力滚珠轴承》.pdf

DIN 7154-1-1966 ISO-fits for the hole basis system tolerance zones deviations《基孔制ISO配合 公差带、偏差》.pdf

DIN 7154-2-1966 ISO-fits for the hole basic system tolerances of fit (clearances and interferences)《基孔制ISO配合 配合公差（间隙和过盈）》.pdf

DIN 7155-1-1966 ISO-fits for the shaft basis system tolerance zones deviations《基轴制ISO配合 公差带 偏差》.pdf

DIN 7155-2-1966 ISO-fits for the shaft basis system tolerances of fit (clearances and interferences)《基轴制ISO配合 配合公差 （间隙和过盈）》.pdf