TCVN 7848-1-2008 Wheat flour Physical characteristics of doughs Part 1 Determination of water absorption and rheological properties using a farinograph《小麦粉 面团的物理性能 第1部分 用淀粉测定记录仪测定吸.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 3670 2B-1992 Polyamide-Imide Bar Rod and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled《20石墨-3聚四氟乙烯填充的聚酰胺-酰亚胺棒材、杆材和型材》.pdf

SAE AMS 3670 3B-1995 Polyamide-Imide Bar Rod and Shapes 12% Graphite - 3% Polytetrafluoroethylene Filled《12%石墨3%聚四氟乙烯填充的聚酰亚胺-亚胺棒材、杆材和型材》.pdf

SAE AMS 3670 4C-1995 Polyamide-Imide Bar Rod and Shapes 30% Glass Fiber《30%玻璃纤维增强的聚酰亚胺-亚胺棒材、杆材和型材》.pdf

SAE AMS 3670 5C-1995 Polyamide-Imide Bar Rod and Shapes 30% Carbon Fiber《30%碳纤维聚酰亚胺-亚胺棒材、杆材和型材》.pdf

SAE AMS 3670B-1995 Polyamide-Imide Bar Rod and Shapes Molded or Extruded《模塑或挤塑的聚酰胺-酰亚胺棒材、杆材和型材》.pdf

SAE AMS 3673C-2011 Cloth Glass Aluminum Face Silicone Rubber Back《硅橡胶背铝面玻璃布》.pdf

SAE AMS 3677A-2011 Fabric Polybenzimidazole (PBI) Polyamide Fiberglass Polytetrafluoroethylene (PTFE) Impregnated Sintered《烧结和聚四氟乙烯(PTFE)浸渍的聚苯并咪唑(PBI)聚酰胺玻璃纤维织物》.pdf

SAE AMS 3678 10A-2010 Type 10 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 15% Carbon Fiber《10类童式聚四氟乙烯(PTFE)模型或者半成品含有15%的碳纤维》.pdf

SAE AMS 3678 11-2010 Type 11 10% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions《11型 10%芳香族聚合物填充原聚四氟乙烯(PTFE)模制品或挤压制品》.pdf