TCVN 7885-1-2008 Radiation protection Terms and definitions Part 1 Terms in alphabetical A to E《辐射防护 术语和定义 第1部分 字母表A至E的术语》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESF-M4D409-A-2009 ACETATE BUTYRATE SHEET LIGHT CONTROL TO BE USED WITH FORD WSS-M99P1111-A 《灯光控制用醋酸丁酸纤维板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D423-A-2006 NYLON (TYPE 6) COPOLYMER HEAT STABILIZED TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的尼龙（型号6）共聚物 与标准FORD WSS-M99P1111-A一起使用 使用WSK-M4D672-A》.pdf

FORD ESF-M4D436-A2-2010 POLYETHERIMIDE 20% GLASS FIBER REINFORCED - INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维增强的聚醚酰亚胺注塑成型料 与标准FORD WSS-M99P1111-A一起.pdf

FORD ESF-M4D46-A-2010 CHLOROSULFONATED POLYETHYLENE (CSM) RUBBER TO BE USED WITH FORD WSS-M99P1111-A 《氯磺化聚乙烯（CSM）橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D511-A-2006 POLYAMIDE (PA) 66 PLASTICIZED - HIGH TEMPERATURE RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D648-A)《增塑聚酰胺66耐高温成型料 与标准FORD W.pdf

FORD ESF-M4D562-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 30% GLASS FIBER REINFORCED - SELF EXTINGUISHING TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的自熄型聚对苯二甲酸丁二醇酯(PBT) 与标准FORD.pdf

FORD ESF-M4D565-A-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) 20% GLASS FIBER REINFORCED INJECTION MOLDING COMPOUND ELECTRICAL GRADE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESF-M4D575-A-2010 POLYBUTYLENE TEREPHTHALATE (PBTP) Ti02 FILLED - HIGH LIGHT REFLECTANCE TO BE USED WITH FORD WSS-M99P1111-A 《高光发射性TI02填充的聚对苯二甲酸丁二醇酯（PBTP） 与标准FORD WSS-M99P1.pdf

FORD ESF-M4D602-A-2010 POLYPHENYLENE ETHER (PPE) HIGH IMPACT POLYSTYRENE BLEND 30% GLASS FIBER REINFORCED INJECTION MOLDING COMPOUND ELECTRICAL GRADE TO BE USED WITH FORD WSS-M99P.pdf