TCVN ISO 6422-2004 Layout key for trade documents《贸易单证样式》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R ISO 15860-2011 Space system Gas contamination Measurements methods for field tests《空间系统 气体污染 现场试验的测量方法》.pdf

GOST R ISO 15882-2012 Sterilization of health care products Chemical indicators Guidance for selection use and interpretation of results《医疗保健产品的消毒 化学指示剂 选择 使用和效果说明指南》.pdf

GOST R ISO 15883-3-2011 Washer-disinfectors Part 3 Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers《洗涤器消毒器 第3部分 人类废弃物容器用热消毒的.pdf

GOST R ISO 15883-4-2012 Washer-disinfectors Part 4 Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes《清洗消毒器 第4部分 针对热敏内镜进行化学消.pdf

GOST R ISO 15926-2-2010 Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production facilities Part 2 Data mode.pdf

GOST R ISO 15973-2005 Closed end blind rivets with break pull mandrel and protruding head (aluminium alloy body and stecl mandrel)《末端闭合凸头抽芯盲铆钉(铝合金体钢芯)》.pdf

GOST R ISO 15974-2005 Closed end blind rivets with break pull mandrel and countersunk head (aluminium alloy body and steel mandrel)《末端闭合沉头抽芯盲铆钉(铝合金体钢芯)》.pdf

GOST R ISO 16000-1-2007 Indoor air Part 1 Sampling General《室内空气 第1部分 取样 概述》.pdf

GOST R ISO 16000-12-2011 Indoor air Part 12 Sampling strategy for polychlorinated biphenyls (PCBs) polychlorinated dibenzo-p-dioxins (PCDDs) polychlorinated dibenzofurans (PCDF) an气.pdf