1、 ANSI/TIA/EIA-136-000-I-2014 APPROVED: AUGUST 28, 2014 WITHDRAWN: JUNE 12, 2015 TIA/EIA-136-000-I (Revision of TIA/EIA-136-000-E) September 2014TDMA Third Generation Wireless List of Parts NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating
2、 misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in
3、any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Stand
4、ards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard
5、 does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use.
6、Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.000-H-WD, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance
7、that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectua
8、l property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder th
9、ereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead
10、left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its co
11、ntents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference c
12、onsists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) T
13、IAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not con
14、stitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of complian
15、ce with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY T
16、HIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENT
17、S OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, S
18、PECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
19、THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA/EIA-136-000-I-2014 iForeword This standard has been approved for publication; however, it is subject to continuing work wi
20、thin TR-45.3 and may change following formal approval. If modified, part will be re-released with a change of release date and an increase in revision level as follows: TIA/EIA-136-xxx-A where the xxx is the part number, and A is the revision level, e.g., A, B, . . . ANSI/TIA/EIA-136-000-I-2014 iiPR
21、EFACE TIA/EIA-136 is a multi-part standard that when taken in total, defines the requirements for a PCS/Cellular system and mobile stations using Time Division Multiple Access (TDMA) technology while also maintaining compatibility with AMPS analog technology. These technical requirements form a comp
22、atibility standard for PCS/cellular mobile telecommunications systems. Their purpose is to ensure that a mobile station can obtain service in any PCS/cellular system manufactured according to this standard. These requirements do not address the quality or reliability of that service. To ensure compa
23、tibility, it is essential that both radio-system parameters and call-processing procedures be specified. The sequence of call processing steps that the mobile stations and base stations execute to establish calls has been specified along with the digital control messages and analog signals that are
24、exchanged between the two stations. The base station is subject to fewer compatibility requirements than the mobile station. Radiated power levels, both desired and undesired, are fully specified for mobile stations to control the RF interference that one mobile station can cause another. Base stati
25、ons are fixed in location and their interference is controlled by proper layout and operation of the system in which the station operates. Detailed call-processing procedures are specified for mobile stations to ensure a uniform response to all base stations. Base station call procedures, like power
26、 levels, are not specified in detail because they are a part of the overall design of the individual land system. This approach to writing the compatibility specification provides the land system designer with sufficient flexibility to respond to local service needs and to account for local topograp
27、hy and propagation conditions. The basic radio-system parameters and call-processing procedures for analog mode of operation embodied in the compatibility specification were derived from EIA/TIA-553. The basic radio system parameters and call-processing procedures for digital and dual mode operation
28、 embodied in the compatibility specification were derived by due process within TIA TR45. As commercial systems evolve there may be a need for additional capabilities primarily in the area of call-processing procedures and new system features. It is important that evolutionary changes be readily acc
29、ommodated. To that end, these technical requirements have been organized into subject groups and independent parts within these groups. Each part is subject to revision independent of all other parts. ANSI/TIA/EIA-136-000-I-2014 iii Contents 1. Parts Content for TIA/EIA-136-I 1 .ANSI/TIA/EIA-136-000
30、-I-2014 ivTHIS PAGE INTENTIONALLY LEFT BLANK ANSI/TIA/EIA-136-000-I-2014 1 1. Parts Content for TIA/EIA-136-I 1 TIA/EIA-136 is a multi-part standard titled “TDMA Third Generation Wireless”. The 2 collection of parts making up this revision of TIA/EIA-136 incorporating protocol 3 version PV11 is give
31、n below. For more information on PV levels, see Information 4 Element “Protocol Version” in TIA/EIA-136-123). 5 Part(s) Title TIA/EIA-136 Publication Revision TIA/EIA-136-0XX Miscellaneous Information TIA/EIA-136-000-I List of Parts TIA/EIA-136-I TIA/EIA-136-005-C Introduction, Identification and Se
32、mi-Permanent Memory TIA/EIA-136-E TIA/EIA-136-010-C Optional Mobile Station Facilities TIA/EIA-136-C TIA/EIA-136-020-E SOC, BSMC, and Other Code Assignments TIA/EIA-136-E TIA/EIA-136-030-B R-UIM Overview and Operation TIA/EIA-136-E TIA/EIA-136-033-A R-UIM File Structure TIA/EIA-136-D TIA/EIA-136-034
33、-A R-UIM - ME Interface Procedures TIA/EIA-136-D TIA/EIA-136-036 Personalization of Mobile Equipment ME TIA/EIA-136-C TIA/EIA-136-037-A R-UIM Application Toolkit TIA/EIA-136-D TIA/EIA-136-1XX Channels TIA/EIA-136-100-B Introduction to Channels TIA/EIA-136-B TIA/EIA-136-110-B RF Channel Assignments T
34、IA/EIA-136-C TIA/EIA-136-121-A Digital Control Channel Layer 1 TIA/EIA-136-A TIA/EIA-136-122-B Digital Control Channel Layer 2 TIA/EIA-136-B TIA/EIA-136-123-I Digital Control Channel Layer 3 TIA/EIA-136-I TIA/EIA-136-131-C Digital Traffic Channel Layer 1 TIA/EIA-136-C TIA/EIA-136-132 Digital Traffic
35、 Channel Layer 2 TIA/EIA-136-0 TIA/EIA-136-133-E Digital Traffic Channel Layer 3 TIA/EIA-136-E TIA/EIA-136-140-C Analog Control Channel TIA/EIA-136-I TIA/EIA-136-150-B Analog Voice Channel TIA/EIA-136-B TIA/EIA-136-2XX Minimum Performance TIA/EIA-136-210-A ACELP Minimum Performance TIA/EIA-136-C TIA
36、/EIA-136-220 VSELP Minimum Performance TIA/EIA-136-B TIA/EIA-136-230 Minimum Performance Specifications for US1 Voice Coder TIA/EIA-136-B TIA/EIA-136-240 Minimum Performance for Adaptive Multi-rate Codec TIA/EIA-136-C TIA/EIA-136-250 VAD Minimum Performance TIA/EIA-136-C ANSI/TIA/EIA-136-000-I-2014
37、2Part(s) Title TIA/EIA-136 Publication Revision TIA/EIA-136-270-C Mobile Stations Minimum Performance TIA/EIA-136-C TIA/EIA-136-271 Mobile Station Minimum Performance for Global Circulation TIA/EIA-136-D TIA/EIA-136-280-D Base Stations Minimum Performance TIA/EIA-136-D TIA/EIA-136-290-A RF Minimum P
38、erformance Requirements for 136HS Outdoor and 136 HS Indoor Bearers TIA/EIA-136-C TIA/EIA-136-3XX Data Services TIA/EIA-136-310-A Radio Link Protocol 1 TIA/EIA-136-B TIA/EIA-136-320 Radio Link Protocol 2 TIA/EIA-136-B TIA/EIA-136-330 Packet-Data Service - Overview TIA/EIA-136-B TIA/EIA-136-331 Packe
39、t-Data Service - 136+ Physical Layer TIA/EIA-136-B TIA/EIA-136-332 Packet-Data Service - 136+ Medium Access Control TIA/EIA-136-B TIA/EIA-136-333 Packet-Data Service - Logical-Link Control TIA/EIA-136-B TIA/EIA-136-334 Packet-Data Service - Subnetwork Dependent Convergence Protocol TIA/EIA-136-B TIA
40、/EIA-136-335 Packet-Data Service - Radio-Resource Management TIA/EIA-136-B TIA/EIA-136-336 Packet-Data Service - Mobility Management TIA/EIA-136-B TIA/EIA-136-337 Packet-Data Service - Tunneling of Signaling Messages TIA/EIA-136-B TIA/EIA-136-340 Packet-Data Service - 136HS Outdoor Overview TIA/EIA-
41、136-B TIA/EIA-136-341 Packet-Data Service - 136HS Outdoor Physical Layer TIA/EIA-136-B TIA/EIA-136-342 Packet-Data Service - 136HS Outdoor RLC/MAC TIA/EIA-136-B TIA/EIA-136-350-C Data Service Control TIA/EIA-136-D TIA/EIA-136-351 EGPRS-136 - AT Command Set TIA/EIA-136-C TIA/EIA-136-360 Packet-Data S
42、ervice - 136HS Indoor Overview TIA/EIA-136-B TIA/EIA-136-361 Packet-Data Service - 136HS Indoor Physical Layer TIA/EIA-136-B TIA/EIA-136-362 Packet-Data Service - 136HS Indoor RLC/MAC TIA/EIA-136-B TIA/EIA-136-370-E Enhanced General Packet Data Service (EGPRS-136) Overview TIA/EIA-136-I ANSI/TIA/EIA
43、-136-000-I-2014 3 Part(s) Title TIA/EIA-136 Publication Revision TIA/EIA-136-376-E Enhanced General Packet Data Service (EGPRS-136) Mobility Management (MM) TIA/EIA-136-I TIA/EIA-136-377-E EGPRS-136 Gs Interface Specifications TIA/EIA-136-I TIA/EIA-136-4XX Voice Coders TIA/EIA-136-410 ACELP TIA/EIA-
44、136-A TIA/EIA-136-420 VSELP TIA/EIA-136-0 TIA/EIA-136-430 US1 TIA/EIA-136-A TIA/EIA-136-440-E Adaptive Multi-Rate Codec TIA/EIA-136-I TIA/EIA-136-5XX Security TIA/EIA-136-510-B Authentication, Encryption of Signaling Information/User Data, and Privacy TIA/EIA-136-B TIA/EIA-136-511-A Messages Subject
45、 to Encryption TIA/EIA-136-B TIA/EIA-136-6XX Teleservice Transport TIA/EIA-136-610-B R-DATA/SMDPP Transport TIA/EIA-136-D TIA/EIA-136-620-A Teleservice Segmentation and Reassembly (TSAR) TIA/EIA-136-C TIA/EIA-136-630 Broadcast Teleservice Transport - Broadcast Air-Interface Transport Service (BATS)
46、TIA/EIA-136-A TIA/EIA-136-670 Teleservices Over GSM SMS (TOGS) TIA/EIA-136-C ANSI/TIA/EIA-136-000-I-2014 4Part(s) Title TIA/EIA-136 Publication Revision TIA/EIA-136-7XX Teleservices TIA/EIA-136-700-D Introduction to Teleservices TIA/EIA-136-D TIA/EIA-136-710-C Short Message Service - Cellular Messag
47、ing Teleservice TIA/EIA-136-D TIA/EIA-136-711 GSM Hosted SMS Teleservice (GHOST) TIA/EIA-136-D TIA/EIA-136-720-C Over-the-Air Activation Teleservice (OATS) TIA/EIA-136-D TIA/EIA-136-730-A Over-the-Air Programming Teleservice (OPTS) TIA/EIA-136-D TIA/EIA-136-740 System Assisted Mobile Positioning thr
48、ough Satellite (SAMPS) Teleservice TIA/EIA-136-C TIA/EIA-136-741 System Assisted Mobile Positioning through Satellite (SAMPS) Support for Analog Systems TIA/EIA-136-D TIA/EIA-136-750 General UDP Transport Service (GUTS) TIA/EIA-136-A TIA/EIA-136-760-A Charge Indication Teleservice (CIT) TIA/EIA-136-
49、D TIA/EIA-136-9XX Annexes/Appendices TIA/EIA-136-900 Introduction to Annexes/Appendices TIA/EIA-136-B TIA/EIA-136-905-A Normative Information TIA/EIA-136-E TIA/EIA-136-910-C Informative Information TIA/EIA-136-D TIA/EIA-136-932 Packet-Data Service - Stage 2 Description TIA/EIA-136-B TIA/EIA-136-933 Packet-Data Service - Fixed Coding Mode MAC TIA/EIA-136-B TIA/EIA
