1、 TIA/EIA STANDARD Cellular Digital Packet Data (CDPD) System Specification MDLP Abstract Test Suite TIA/EIA-732-930 (Upgrade of TIA/EIA/IS-732-930) JULY 2001 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of ANSI/TIA/EIA-732-9
2、30-2001 Approved: June 7, 2001 TIA/EIA-732-930 NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the pu
3、rchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications
4、, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the American National Standar
5、ds Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all appli
6、cable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 4033-930-UG, formulated under the cognizance of the TIA
7、TR-45.6 Subcommittee on Adjunct Data Packet Wireless Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2001 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to current Catalog of EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEE
8、RING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced without permission. Organizations may obtain perm
9、ission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 930iTIA/EIA-732-930123456789101112131
10、415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Contents1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-12 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11、. . . . . . . . . . . . . . . 930-12.1 State Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-12.1.1 TEI Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12、. . . .930-12.1.2 Sleep Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-22.1.3 Data Link Layer Entity (DLLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-22.2 Other Definitions . . . .
13、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-53 Testing Methodology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-63.1 Relationship Between the TSS & TP and the Abstract Test Suite . . . . . . .
14、 . . . . . . . . . . . .930-63.2 Test Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-63.3 Test Suite Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15、. . . . .930-74 The MDLP ATS Test Suite Structure. . . . . . . . . . . . . . . . . . . . . . . . . . . 930-74.1 Test Case Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-74.2 Test Step Groups . . . . . . . . . . . . . . .
16、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-94.3 Naming Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-94.3.1 Test Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-94.4 Test Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-104.5 Test Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18、. . . . . . . . . . . . . . . . . . . . . . . . . . .930-114.6 Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-124.6.1 Suffixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19、 . . . . . . . . . . . . . . . . . . . . .930-125 Introduction to the MDLP Layer PIXIT . . . . . . . . . . . . . . . . . . . . . . . 930-135.1 PIXIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-135.1.1 Purpose
20、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-146 Instructions for Completing the PIXIT Proforma . . . . . . . . . . . . . . 930-146.1 PICS/PIXIT Relationship . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21、. . . . . . . . . . . . . . . . . . . . .930-146.2 Client/Testing Agency Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-157 MDLP PIXIT Proforma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-167.1 PIXIT Identif
22、ication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-167.2 Parties Involved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-167.2.1 Client Information . . . . .
23、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-167.2.2 Test Agency Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-177.3 IUT Identification . . . . . . . . . . . . . . . . . . . . . . .
24、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-177.4 SUT Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-188 Implicit Sends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25、. . . . . . . . . . 930-188.1 Transmitting Requested MDLP Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-20TIA/EIA-732-930930ii1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859608.2 Eliciting Specific
26、MDLP Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-219 MDLP PIXIT Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-219.1 System Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27、 . . . . . . . . . . . . . . . . . . . .930-239.2 Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-2410 Procedural Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-26
28、10.1 Common Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-2610.2 User Side Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-2711 Information Field Cont
29、ents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-2712 Constraint Parameterization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-2912.1 CRbit Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30、. . . . . . .930-3012.2 PFbit Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-3012.3 NextToSend Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-3112.4
31、 NextToRcv Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-3112.5 Data Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-3112.6 FRMR Parameters . . .
32、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .930-3113 MDLP Abstract Test Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-32APPENDIX 930AAbstract Test Suite Files . . . . . . . . . . . . . . . . . . . . . . .
33、. 930-33A.1 ISO Machine-processable Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-33A.2 ITEX Machine-processable Format . . . . . . . . . . . . . . . . . . . . . . . . . . . 930-33930iii123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051
34、525354555657585960TIA/EIA-732-930PART 930 MDLP Abstract Test SuiteForewordThis foreword is not part of the StandardThis Standard has been produced by the TR-45.6 Subcommittee of the TIA/EIA/TR-45 Committee.This document contains significant portions of material originally submitted by the Cellular D
35、igital Packet Data Forum Inc.This document set constitutes the Cellular Digital Packet Data (CDPD) System Specification. CDPD is a technology intended to provide packet data networking services to mobile hosts. The media used to provide these services consists of radio channels typically used for Ad
36、vanced Mobile Phone System (AMPS) cellular service.Document StructureThis Standard is published as a series of Parts. Each Part contains information pertaining to one aspect of the system.The functional structure of the Cellular Digital Packet Data System Specification is as follows:a71 Introduction
37、 and OverviewTIA/EIA-732-930 MDLP Abstract Test Suite930iv123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960This document provides an overview of the CDPD Network and serves as a guide to the remainder of the system specification for speci
38、fic detailed information.In this Part, design objectives are described and are followed by the design concepts used to realize the stated objectives. The resultant network is then described in terms of its external interfaces, major network elements and network services. A listing of key identifiers
39、 in CDPD is then followed by a comprehensive glossary of CDPD terms and a reference list of non-CDPD documents.This Part contains the detailed listing of all Parts of the Cellular Digital Packet Data Specifications.a71 Part 300 to Part 799Protocols and InterfacesThese Parts form the heart of the CDP
40、D System Specification. They define the communications architecture of CDPD, including communications layer entities, services, protocol stacks, the three key interfaces, Radio Resource Control, Mobility Management, Accounting Management, Support Services and Network Management.a71 Part 800 to Part
41、899Supplementary Protocol InformationThese Parts contain further specification of the primary CDPD protocols. State transition matrices are used to define protocol state machines, and Protocol Implementation Conformance Statements (PICS) are provided for implementors.a71 Part 900 to Part 999Protocol
42、 Test SpecificationsFollowing an overview of protocol testing, these Parts contain Abstract Test Suites (ATSs) and Protocol Implementation eXtra Information for Test (PIXIT) for the protocols specified in Part 300 to Part 799.a71 Part 1000 to Part 1999Guidelines for Service ProvidersThese Parts desc
43、ribe guidelines for CDPD Service Providers.9301123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Introduction TIA/EIA-732-930PART 930 MDLP Abstract Test Suite1 IntroductionThis part specifies the Mobile Data Link Protocol (MDLP) Abstract T
44、est Suite (ATS). Further, this part:a71 Defines specific terms relevant to the MDLP ATSa71 Discusses test selection criteriaa71 Provides naming conventions for ATS test groups and test cases.The MDLP ATS is the basis for evaluating an implementations conformance to the MDLP protocol defined in Part
45、403.This part does not specify how test cases are to be realized or used, nor how test results are to be presented or used.2 Definitions2.1 State Definitions2.1.1 TEI ManagementThe following states are used for the MDLP TEI Management entity.UNASSIGNED No TEI value is currently assigned to the M-ES.
46、 This is an M-ES specific state.TIA/EIA-732-930 MDLP Abstract Test Suite9302123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960REQUESTED The IUT wishes to establish a connection with the network and has transmitted an initial TEI Identity R
47、equest message. It is awaiting a TEI Identity Assign message from the MD-IS. This is an M-ES specific state.ASSIGNED A valid TEI value is currently assigned to the TEI. This is the result of receiving a valid TEI Identity Assign message from the MD-IS. This is an M-ES specific state.State S1 Normal.
48、 The IUT is operating normally. This is an MD-IS specific state.State S21 Verify in UseFirst. First transmission of the TEI Identity Check message used in the TEI Check procedure to verify whether a given TEI is in use or not. This is an MD-IS specific state.State S22 Verify in UseSecond. Second tra
49、nsmission of the TEI Identity Check message used in the TEI Check procedure to verify whether a given TEI is in use or not. This is an MD-IS specific state.State S31 Verify Multiple TEI AssignmentFirst. First transmission of the TEI Identity Check message used in the TEI Check procedure to verify whether a given is multiply assigned or not. This is an MD-IS specific state.State S32 Verify Multiple TEI AssignmentSecond. Second transmission of the TEI Identity Check message used in the TEI Check procedure to verify whether a given is multiply assigned or not. This is an MD-IS
