1、 TIA-102.CBBE September 2011Project 25 Recommended Compliance Assessment Tests - Conventional Operation NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeabil
2、ity and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling pr
3、oducts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Sta
4、ndards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all appli
5、cable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN-102.CBBE, formulated under the cognizance of the TIA TR-8 Mo
6、bile and Personal Private Radio Standards, TR-8.25 Subcommittee on Compliance Assessment). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUST
7、RY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproducti
8、on of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on h
9、ow to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form
10、; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties.
11、TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims
12、 any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are
13、reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organiza
14、tion (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) t
15、hen (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and pub
16、lished pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance
17、with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCER
18、NING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESEN
19、TATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL
20、DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BR
21、EACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOU
22、T SUCH LIMITATIONS. TSB-102.CBBE ii Foreword (This foreword is not part of this bulletin.) This document will be submitted to the APCO/NASTD/FED Project 25 Steering Committee by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1
23、993. The MOU provides that APCO/NASTD/FED will devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the APCO/TIA
24、 Project 25 Interface Committee (APIC), the APIC Compliance Assessment Process and Procedures Task Group (CAPPTG), and TIA Industry members. This document describes a subset of tests in the TIA-102 series of technical documents TR-8.25 believes are appropriate for consideration for use in a complian
25、ce assessment testing environment associated with Conventional Air Interface operation. This document is subject to change as changes occur in the TIA-102 series of technical documents. The Standardized Conventional tests identified here can be found in the references of this document.TSB-102.CBBE i
26、ii Table of Contents 1 INTRODUCTION1 1.1 Scope2 1.2 Revision History.3 1.3 Informative References.3 2 TESTS4 TSB-102.CBBE iv List of Tables TABLE 1 - REVISION HISTORY.3 TABLE 2 - CONVENTIONAL OPERATION - DIRECT MODE TESTS.4 TABLE 3 - CONVENTIONAL OPERATION - REPEAT MODE TESTS5 TABLE 4 - CONVENTIONAL
27、 OPERATION FNE INCLUDES DISPATCH CONSOLES MODE6 TSB-102.CBBE 1 1 Introduction The purpose of this Telecommunications Systems Bulletin is to identify the subset of the tests that the subject matter experts of TIA TR-8.25 have determined to be appropriate for use in a compliance assessment testing env
28、ironment of the Common Air Interface for Conventional operation. The full set of Conventional operation tests published by TIA in the TIA-102 series of technical documents may be found in the informative references 1, 2 and 3. The full set of Conventional operation tests as described in the informat
29、ive references 1, 2 and 3 is expected to be part of the manufacturers product design, product implementation and product certification process. The “product design certification process” referred to in the prior sentence is a manufacturer-specific process, part of the product development environment
30、, and does not imply formal certification by any entity such as the FCC, etc. This document does not substitute or override any of the tests in the references in 1, 2 and 3. This document was drafted by TR-8.25 based upon input from the APCO/TIA Project 25 Interface Committee (APIC), APIC Compliance
31、 Assessment Process and Procedures Task Group (CAPPTG), and industry representatives. This document represents the agreements achieved within TR-8.25. TSB-102.CBBE 2 1.1 Scope This Bulletin identifies the tests in the TIA-102 series of technical documents that are appropriate for use in a compliance
32、 assessment testing environment in the area of Common Air Interface for Conventional operation. While formulating this document the members of TR-8.25 reviewed all Conventional tests described in references 1, 2 and 3. In determining the tests recommended herein as appropriate to be considered for i
33、nclusion in the compliance assessment testing in this area, TR-8.25 considered whether tests in references 1, 2 and 3 were important for achieving interoperability between equipment of different manufacturers versus tests important for product design certification in the product development process.
34、 In general, tests that were determined to be oriented towards a “product design certification process” in a product development environment were deemed inappropriate for inclusion in the list recommended herein. The resulting list of tests recommended herein represents tests that are most important
35、 for or most likely to impact interoperability between manufacturers building to the same set of published standard documents. TSB-102.CBBE 3 1.2 Revision History Table 1 - Revision History Version Date Description Rev A April 2009 First draft submitted to CAPPTG. Rev B June 2009 Second draft, modif
36、ied based on comment resolution during June 15, 2009 CAPPTG teleconference Rev C September 2009 Updated based on comment resolution during August 31, 2009 CAPPTG teleconference. Rev D October 2009 Added the new test cases found in Rev 10 of the proposed revision to the Conventional Interoperability
37、Test Procedures, to be published as TIA-102.CABA Rev E October 2010 Added a subset of the conformance tests from TIA-102.CAEA and TIA-102.CAEB. Added two additional interoperability test cases found in TIA-102.CABA Conventional Interoperability Test Procedures. Rev F November 2010 Made changes based
38、 on comment matrix 10-11-0001-R4. Rev G August 2011 Updated with proposed changes based on Harris and Motorola Solutions ballot comments. 1.3 Informative References 1 TIA-102.CABA Interoperability Test Procedures Conventional Voice Equipment, October 2010 2 TIA-102.CAEA, Project 25 Conformance Profi
39、le Level One Basic Conventional Operation, April 2009 3 TIA-102.CAEB, Project 25 Conformance Profile Level Two Advanced Conventional Operation, December 2009 TSB-102.CBBE 4 2 Tests TR-8.25 has identified the following tests after review of references 1, 2 and 3. Table 2 defines the subset of tests r
40、ecommended for inclusion in compliance assessment testing when testing in Direct Mode. Table 3 defines the subset tests recommended for inclusion in compliance assessment testing when testing in Repeat Mode (SU to FNE to SU). Table 4 defines the subset of tests recommended for inclusion in complianc
41、e assessment testing when testing in Repeat Mode and the FNE has a dispatch console or other monitoring device. Table 2 - Conventional Operation - Direct Mode Tests Conventional Operation Tests Direct Mode Interoperability Test from 1 Conformance Test from 2 Conformance Test from 3 Unaddressed Voice
42、 Call 2.2.1.4.1 NA NA Group Voice Call 2.2.2.4.1 2.2.3.4.1 2.2.8.4.1 7.1 NA Emergency Call 2.2.4.4.1 7.2 NA Unit-to-Unit Call 2.2.5.4.1 2.2.5.4.2 2.2.6.4.1 2.2.6.4.2 8.1 NA Encryption 2.2.7.4.1 NA NA Call Alert 2.3.1.4.1 2.3.1.4.2 NA 6.2 Radio Check 2.3.2.4.1 2.3.2.4.2 NA 7.2 Message Update 2.3.3.4.
43、1 2.3.3.4.2 NA 9.3 Status Update 2.3.4.4.1 2.3.4.4.2 NA 8.3 Status Query 2.3.5.4.1 2.3.5.4.2 NA 8.7 Radio Unit Monitor 2.3.6.4.1 2.3.6.4.2 2.3.6.4.3 2.3.6.4.4 NA 10.2 Radio Unit Inhibit NA NA NA Radio Unit Uninhibit NA NA NA TSB-102.CBBE 5 Table 3 - Conventional Operation - Repeat Mode Tests Convent
44、ional Operation Tests Repeat Mode (SU to FNE to SU) Interoperability Test from 1 Conformance Test from 2 Conformance Test from 3 Unaddressed Voice Call 2.4.1.4.1 2.4.3.4.1 2.4.5.4.1 5.61 NA Group Voice Call 2.4.2.4.1 2.4.4.4.1 2.4.6.4.1 2.4.7.4.1 2.4.9.4.1 2.4.14.4.1 5.1 5.3 5.4 5.5 5.6 NA Emergency
45、 Call 2.4.8.4.1 5.2 NA Unit-to-Unit Call 2.4.10.4.1 2.4.10.4.2 2.4.10.4.3 2.4.10.4.4 2.4.11.4.1 2.4.11.4.2 2.4.12.4.1 2.4.12.4.2 2.4.13.4.1 6.1, 6.2, 6.3, 6.4 NA All Call NA 5.7 NA Encryption 2.4.13.4.1 NA NA Emergency Alarm NA NA NA Call Alert 2.5.1.4.1 2.5.1.4.2 NA 6.1 Radio Check 2.5.2.4.1 2.5.2.
46、4.2 NA 7.1 Message Update 2.5.3.4.1 2.5.3.4.2 2.5.3.4.3 2.5.3.4.4 NA 9.1, 9.2 Status Update 2.5.4.4.1 2.5.4.4.2 2.5.4.4.3 2.5.4.4.4 NA 8.1, 8.2 Status Query 2.5.5.4.1 2.5.5.4.2 NA 8.6 Radio Unit Monitor 2.5.6.4.1 2.5.6.4.2 2.5.6.4.3 2.5.6.4.4 NA 10.1 Radio Unit Inhibit NA NA NA Rado Unit Uninhibit N
47、A NA NA 1 Unaddressed Call is tested when the receiving SU is in Normal Squelch mode. TSB-102.CBBE 6 Table 4 - Conventional Operation FNE Includes Dispatch Consoles Mode Conventional Operation Tests - FNE includes Dispatch and/or Other Monitoring Console (Repeat Mode (SU to FNE to SU) or Direct Mode
48、) Interoperability Test from 1 Conformance Test from 2 Conformance Test from 3 Unaddressed Voice Call 2.6.1.4.1 NA NA Group Voice Call 2.6.2.4.1 NA NA Emergency Call 2.6.3.4.1 2.6.3.4.2 NA NA Unit-to-Unit Call 2.6.5.4.1 2.6.5.4.2 NA NA All Call 2.6.4.4.1 NA NA Encryption 2.6.6.4.1 NA NA Emergency Al
49、arm 2.7.1.4.1 NA 5.1, 5.2 Call Alert 2.7.2.4.1 2.7.2.4.2 NA 6.3, 6.4 Radio Check 2.7.3.4.1 NA 7.3 Message Update 2.7.6.4.1 2.7.6.4.2 2.7.6.4.3 NA 9.4, 9.5 Status Update 2.7.7.4.1 2.7.7.4.2 NA 8.4, 8.5 Status Query 2.7.8.4.1 NA 8.8 Radio Unit Monitor 2.7.9.4.1 2.7.9.4.2 NA 10.3 Radio Unit Inhibit 2.7.4.4.1 NA 11.1 Rado Unit Uninhibit 2.7.5.4.1 NA 12.1
