1、TIA/EIA TELECOMMUNICATIONS SYSTEMS BULLETIN TDMA Cellular PCS - Radio Interface - Elementary File Alignment TIA/EIA-136-033 Issues in TSB-132 OCTOBER 2001 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telcwmmmcationu Industry A.wocatioo rcprwxrits the rommunicatiom sector of Elsctron 0-c lnd ustries A
2、llia nee NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining wit
3、h minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Stan
4、dards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards, Publications and Bulletins are adopted by EIA in accordance with the American National Standards Institute (ANSI) patent poli
5、cy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA/EIA Standards or Interim Standards, in that they contain a compilation
6、of engineering data or information useful to the technical community, and represent approaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, o
7、r that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating comm
8、ittee to revise and update this Bulletin from time to time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 3-0028, formulated under the cognizance of the TIA TR-45.3 Subcommittee on Time Division Digital
9、 Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2001 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to the current Catalog of ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEERING PUBLICATIONS or call Global Engineering Documen
10、ts, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. I Identifier: 6FB 1 2 File Type: Transparent Mandatory TWEWTSB- 132 1 2 Statement of the Problem 1 byte 1 byte Number of Indicators (S) M Indicator nl to n4 M II 12 13 14 15 During the development
11、of the R-UM support feature for TWEIA- 136-C, one of the goals was to attain alignment with multiple industry initiatives related to incorporation of R-UIM cards supporting a variety of TDMA related projects. Among these was the GAIT program. Subsequent to the publication of TINEIA- 136-030 and TWEI
12、A- 136-033, there were some incremental updates to the elementary files supporting this initiative. This TSB provides an informative update regarding these developments, prior to their publication in TWEIA- 136-030-A and TWEIA-l36-033-A, as part of the TWEIA-136-D project. Proposed Solution 136-033
13、Changes: 2.8 EF s1-m (ANSI-136 USAGE INDICATORS) This file contains usage indicators for TIA/EIA- 136 parameters. Access Conditions: READ UPDATE OTA ALW ADM YES Bytes I Description I M/O I Length I 16 Indicators: Indicatorni : ESN Usage indicator Indicator n2 : Indicator n3 : Indicator n4 : Reserved
14、 Service Provider Determination indicator Protocol Priority indicator 17 18 19 20 21 22 23 24 Additional Indicators may be defined. Co ding: . . . The bits for indicators not yet defined shall be set to indicate RFU. All bytes that are RFU shall be set to ?00? and RFU bits shall be set to ?O?. The c
15、oding of each indicator is shown below. 1 I TIA/EIA/TSB- 132 Byte 2: 2 3 4 5 6 7 8 9 10 II 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Indicator nl Indicator n2 Indicator n3 Indicator n4 Coding of Indicator nl (ESN Usage indicator) . . . . b2= 1 andbl= 1: RFU
16、b2 = O and bl = O: Use ESN on ME for Reporting & Authentication b2 = O and bl = 1: Use ESN on ME for Reporting and S-ESN for Authentication b2 = 1 and bl = O: Use ESN on ME and S-ESN for Reporting, and S-ESN for Authentication Coding of Indicator n2 (Service Provider Determination indicator) . . . .
17、 b4=1andb3=1: RFU b4 = O and b3 = O: Use only GSM broadcast information for SP Determination. b4 = O and b3 = 1: Use TIA/EIA-136 information (see note 1) first for SP Determination if present, otherwise use GSM broadcast information. b4 = 1 and b3 = O: Use only TIA/EIA-136 information (see note 1) f
18、or SP Determination. Coding of Indicator n3 (Protocol Priority indicator) . b7 =O andb6 =O and b5 = O: . b7=Oandb6=Oandb5= 1: . b7=Oandb6=1andb5=0: . b7=Oandb6= 1 andb5= 1: . b7=1andb6=Oandb5=0: I . b7=1andb6=Oandb5=1: . b7 = 1 andb6 = 1 andb5 = O: . b7 = 1 andb6 = 1 andb5 = 1: GSM then ANSI-136 ANS
19、I-136 then GSM GSM only ANSI-136 only ANSI-136 Persistent GSM Home Preferred RFU RFU Note 1: In the context of this EF, TIA/EIA-136 information refers to “non-GSM Broadcast Information” messages with the “non-GSM Protocol Discriminator” set to “TIA/EIA- 136.” 2.25 EF SSFC (SS FEATURE CODE TABLE) Thi
20、s file contains the numeric feature code to be used by the mobile station when a supplementary service is invoked from a menu on the mobile equipment in TIA/EIA-136 or EIA/TIA-553 mode. When the subscriber invokes a supplementary service control from the menu in an TIA/EIA-136 or EIA/TIA- 553 networ
21、k, the mobile station shall perform the requested action by sending the network the appropriate indication or feature code (FC) string for that supplementary service by reading the Supplementary Service Feature Code Table entry, e.g., an origination with dial string *FC + . 2 TIA/EIA/TSB- 132 Record
22、 Size: 2 bytes Identifier: 6FBE I File Type: Linear Fixed I optional Update Activity: Low Record 1 2 3 4 Description M/O Length Call Waiting Deactivation (per call) M 2 bytes Call Forwarding Unconditional Activation M 2 bytes Call Forwarding Unconditional Deactivation M 2 bytes Call Forwarding Busy
23、Activation M 2 bytes 5 I Call Forwarding Busy Deactivation I M I 2bytes 6 7 8 Call Forwarding No Answer Activation M 2 bytes Call Forwarding No Answer Deactivation M 2 bytes Call Forwarding Default Activation M 2 bytes 9 10 Call Forwarding Default Deactivation M 2 bytes Call Fom7arding Deactivation All M 2 bytes . 136-030 Changes: A feature code corresponds to the decimal representation of the corresponding 2 byte field. 11 12 Table 2 General Outline of RUM Files Calling Eine YB Presentation M 2 bytes Calling Line ID Restriction 1v1 2 bytes File Name 3
