1、 TIA-1006-A E March 2010High Rate Broadcast Packet Data Air Interface Specification Enhanced Addenda NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability
2、 and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling produ
3、cts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standa
4、rds Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicab
5、le regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0107-RV1 formulated under the cognizance of the TIA TR-45
6、.5 -Spread Spectrum Digital Technology - Mobile and Personal Communications Standards) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY A
7、SSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction o
8、f these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to re
9、quest permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the
10、 Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes
11、 no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obli
12、gation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonabl
13、e or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“ot
14、her SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) T
15、IA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pe
16、nding patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the
17、contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE
18、ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS O
19、R WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES,
20、DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF C
21、ONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LI
22、MITATIONS. CONTENTS TIA-10063GPP2 C.SPS0054-A vVer 0.1.096543 CONTENTS212.0 i FOREWORD.lxxxviixiiixiii 1 REFERENCES.lxxxixxvxv 2 1 Overview .1-1 3 1.1 Scope of this Document.1-1 4 1.2 Requirements Language 1-1 5 1.3 Architecture Reference Model 1-1 6 1.4 Broadcast Channel1-2 7 1.4.1 Overview1-2 8 1.
23、4.2 Broadcast Physical Channels.1-2 9 1.4.3 Broadcast Logical Channels. 1-31-2 10 1.4.4 Broadcast-Multicast Flows.1-3 11 1.5 Protocols .1-3 12 1.5.1 Interfaces 1-3 13 1.5.2 InUse and InConfiguration Protocol Instances . 1-41-3 14 1.5.2.1 Procedures and Messages 1-41-3 15 1.5.2.1.1 Commit Procedures1
24、-4 16 1.5.2.2 InConfiguration Protocol Instance Instantiation .1-4 17 1.5.2.3 InUse Protocol Instance Instantiation 1-4 18 1.5.2.4 Protocol Initialization .1-4 19 1.5.3 Protocol Negotiation. 1-51-4 20 1.6 Terms 1-51-4 21 1.7 Notation 1-9 22 2 Broadcast Protocol Suite .2-1 23 2.1 Overview2-1 24 2.2 B
25、asic Protocol Numbers.2-1 25 2.3 Default Broadcast Protocol Suite .2-1 26 2.3.1 Overview2-1 27 2.3.2 Primitives and Public Data.2-1 28 CONTENTS TIA-10063GPP2 C.SPS0054-A vVer 0.1.096543 CONTENTS212.0 ii 2.3.2.1 Return Indications.2-1 1 2.3.2.2 Public Data2-1 2 2.3.3 Protocol Data Unit.2-1 3 2.3.4 Pr
26、otocol Initialization.2-1 4 2.3.4.1 Protocol Initialization for the InConfiguration Instance of the Protocol 5 Suite2-1 6 2.3.4.2 Protocol Initialization for the InUse Instance of the Protocol Suite .2-2 7 2.3.5 Procedures and Messages for the InConfiguration Instance of the Protocol 8 Suite.2-2 9 2
27、.3.5.1 Procedures 2-2 10 2.3.5.2 Commit Procedures .2-2 11 2.3.5.3 Message Formats.2-3 12 2.3.5.3.1 ConfigurationRequest 2-3 13 2.3.5.3.2 ConfigurationResponse2-3 14 2.3.6 Procedures and Messages for the InUse Instance of the Protocol Suite 2-4 15 2.3.6.1 Procedures 2-4 16 2.3.6.2 Message Formats.2-
28、4 17 2.3.6.3 Interface to Other Protocols .2-4 18 2.3.6.3.1 Indications.2-4 19 2.3.7 Configuration Attributes2-4 20 2.3.8 Protocol Numeric Constants 2-4 21 2.3.9 Session State Information .2-4 22 2.4 Generic Broadcast Protocol Suite 2-5 23 2.4.1 Introduction 2-5 24 2.4.1.1 Overview2-5 25 2.4.1.2 Bas
29、ic Protocol Numbers.2-6 26 2.4.1.3 Public Data2-6 27 2.4.1.4 Messages.2-6 28 2.4.2 Generic Broadcast Protocol Suite Initialization 2-6 29 2.4.2.1 Protocol Initialization for the InConfiguration Instance of the Generic 30 Broadcast Protocol Suite2-6 31 2.4.3 Procedures and Messages for the InConfigur
30、ation Instance of the Generic 32 Broadcast Protocol Suite.2-7 33 CONTENTS TIA-10063GPP2 C.SPS0054-A vVer 0.1.096543 CONTENTS212.0 iii 2.4.3.1 Procedures.2-7 1 2.4.3.2 Commit Procedures .2-7 2 2.4.3.3 Message Formats . 2-82-7 3 2.4.3.3.1 ConfigurationRequest. 2-82-7 4 2.4.3.3.2 ConfigurationResponse
31、2-8 5 2.4.4 Broadcast Control Protocol 2-10 6 2.4.4.1 Overview2-10 7 2.4.4.2 Protocol Data Unit .2-10 8 2.4.4.3 Procedures.2-10 9 2.4.4.3.1 Structure of the BCMCS Flow Identifier .2-10 10 2.4.4.3.2 Access Network Requirements2-11 11 2.4.4.3.3 Access Terminal Requirements. 2-132-12 12 2.4.4.3.3.1 BCM
32、CS Flow Registration. 2-132-12 13 2.4.4.3.3.1.1 BCMCS Flow Registration for Paging 2-142-13 14 2.4.4.3.3.1.2 BCMCS Flow Registration for Dynamic Broadcast 2-152-14 15 2.4.4.3.3.1.3 Computation of Authorization Signature. 2-152-14 16 2.4.4.4 Message Formats . 2-172-16 17 2.4.4.4.1 BroadcastReset Mess
33、age 2-172-16 18 2.4.4.4.2 BCMCSFlowRegistration Message 2-172-16 19 2.4.4.4.3 BroadcastReject Message . 2-222-21 20 2.4.4.5 Interfaces to Other Protocols 2-262-25 21 2.4.4.5.1 Indications. 2-262-25 22 2.4.5 Broadcast Framing Protocol. 2-282-26 23 2.4.5.1 Overview 2-282-26 24 2.4.5.2 Protocol Data Un
34、it . 2-282-26 25 2.4.5.3 Procedures. 2-292-27 26 2.4.5.3.1 Access Network Requirements 2-292-27 27 2.4.5.3.2 Framing FCS 2-292-27 28 CONTENTS TIA-10063GPP2 C.SPS0054-A vVer 0.1.096543 CONTENTS212.0 iv 2.4.5.4 Frame Header Format.2-302-28 1 2.4.6 Broadcast Security Protocol2-312-29 2 2.4.6.1 Overview
35、.2-312-29 3 2.4.6.2 Protocol Data Unit 2-312-29 4 2.4.6.3 Procedures .2-312-29 5 2.4.6.3.1 Access Network Requirements 2-312-29 6 2.4.6.3.1.1 Constructing the Encryption Mask2-322-30 7 2.4.6.3.1.1.1 Generating the RandomSeed.2-322-30 8 2.4.6.3.1.1.2 Constructing the Short Term Key 2-332-31 9 2.4.6.3
36、.1.1.3 Constructing the Cryptosync.2-342-32 10 2.4.6.3.1.2 Constructing Broadcast Security Packets2-352-33 11 2.4.6.3.1.3 Requirements for transmission of SecurityParameters Message2-362-34 12 2.4.6.4 Message Formats2-372-35 13 2.4.6.4.1 SecurityParameters Message 2-372-35 14 2.4.7 Broadcast MAC Pro
37、tocol.2-392-37 15 2.4.7.1 Overview.2-392-37 16 2.4.7.2 Public Data.2-402-38 17 2.4.7.3 Protocol Data Unit 2-402-38 18 2.4.7.4 Procedures .2-412-38 19 2.4.7.4.1 Access Network Requirements 2-412-38 20 2.4.7.4.1.1 Logical to Physical Channel Mapping 2-412-38 21 2.4.7.4.1.2 BroadcastOverhead Message Tr
38、ansmission.2-432-38 22 2.4.7.4.1.3 Generation of Error Control Blocks .2-442-38 23 2.4.7.4.1.3.1 Overview .2-442-38 24 2.4.7.4.1.3.2 Reed-Solomon Code Generator2-452-38 25 2.4.7.4.1.3.2.1 (1, 1, 0) Reed-Solomon Code2-452-38 26 2.4.7.4.1.3.2.2 (16, 12, 4) Reed-Solomon Code2-462-38 27 2.4.7.4.1.3.2.3
39、(16, 13, 3) Reed-Solomon Code2-462-38 28 2.4.7.4.1.3.2.4 (16, 14, 2) Reed-Solomon Code2-472-38 29 2.4.7.4.1.3.2.5 (32, 24, 8) Reed-Solomon Code2-482-38 30 2.4.7.4.1.3.2.6 (32, 26, 6) Reed-Solomon Code2-492-38 31 2.4.7.4.1.3.2.7 (32, 28, 4) Reed-Solomon Code2-522-38 32 CONTENTS TIA-10063GPP2 C.SPS005
40、4-A vVer 0.1.096543 CONTENTS212.0 v 2.4.7.4.1.4 Multiplexer. 2-542-38 1 2.4.7.4.1.5 Timing 2-552-38 2 2.4.7.4.1.6 Transmission Formats 2-572-38 3 2.4.7.4.1.7 Enhanced Broadcast Channel Transmission from Multiple 4 Sectors . 2-682-38 5 2.4.7.4.1.7.1 Single-frequency Network (SFN) Transmission 2-692-3
41、8 6 2.4.7.4.1.7.2 Variable-rate Transmission. 2-692-38 7 2.4.7.4.1.8 Enhanced Broadcast Channel Parameters 2-702-38 8 2.4.7.4.1.8.1 Pilot-to-Data Power Ratio (PDR) Parameters . 2-712-38 9 2.4.7.4.1.9 MAC Index . 2-812-38 10 2.4.7.4.1.10 Examples . 2-812-38 11 2.4.7.4.1.10.1 Example 1 2-812-38 12 2.4
42、.7.4.1.10.2 Example 2 2-842-38 13 2.4.7.4.2 Access Terminal Requirements. 2-852-38 14 2.4.7.4.2.1 BroadcastOverhead Message Processing. 2-852-38 15 2.4.7.5 Message Formats . 2-862-38 16 2.4.7.5.1 BroadcastOverhead Message 2-862-38 17 2.4.7.5.1.1 RemainingBCMCSOverheadFields when BCMCSFlowFormat is 1
43、8 0 . 2-992-38 19 2.4.7.5.1.2 RemainingBCMCSOverheadFields when BCMCSFlowFormat is 20 1 . 2-1052-38 21 2.4.7.5.1.3 EnhancedBCMCSOverheadFields when BCMCSFlowFormat is 22 0 . 2-1112-38 23 2.4.7.5.1.4 EnhancedBCMCSOverheadFields when BCMCSFlowFormat is 24 1 2-1212-382-97 25 2.4.7.5.1.5 ACPilotToDataRa
44、tioRecord 2-1302-382-104 26 2.4.7.5.1.5.1 ACPDRRecordForThisLogicalCh when 27 ACDualPDREnabledForThisLogicalCh is 0 2-1332-382-106 28 2.4.7.5.1.5.2 ACPDRRecordForThisLogicalCh when 29 ACDualPDREnabledForThisLogicalCh is 1 2-1342-382-106 30 CONTENTS TIA-10063GPP2 C.SPS0054-A vVer 0.1.096543 CONTENTS2
45、12.0 vi 2.4.7.6 Block Header Format.2-1372-382-107 1 2.4.7.7 Broadcast MAC Trailer Format 2-1372-382-108 2 2.4.8 Broadcast Physical Layer Protocol .2-1382-382-109 3 2.4.8.1 Overview2-1382-382-109 4 2.4.8.2 Protocol Data Unit .2-1382-382-109 5 2.4.8.2.1 Broadcast Physical Layer Packet Format2-1382-38
46、2-109 6 2.4.8.2.2 Bit Transmission Order2-1392-382-110 7 2.4.8.2.3 Computation of the FCS Bits .2-1392-382-110 8 2.4.8.3 Procedures 2-1392-382-110 9 2.4.8.3.1 Access Terminal Requirements 2-1392-382-110 10 2.4.8.3.2 Access Network Requirements .2-1392-382-110 11 2.4.8.3.2.1 Frequency Parameters .2-1
47、392-382-110 12 2.4.8.3.2.2 Power Output Characteristics 2-1392-382-110 13 2.4.8.3.2.3 Modulation Characteristics 2-1392-382-110 14 2.4.8.3.2.3.1 Forward Channel Structure2-1392-382-110 15 2.4.8.3.2.3.1.1 Overview 2-1392-382-110 16 2.4.8.3.2.3.1.2 Enhanced Broadcast Channel 2-1422-382-113 17 2.4.8.3.
48、2.3.1.2.1 Slot Structure.2-1422-382-113 18 2.4.8.3.2.3.1.3 Modulation Parameters 2-1442-382-115 19 2.4.8.3.2.3.1.4 Data Rates .2-1482-382-118 20 2.4.8.3.2.3.1.5 MACIndex 2-1482-382-118 21 2.4.8.3.2.3.2 Broadcast Channels.2-1482-382-118 22 2.4.8.3.2.3.2.1 Enhanced Broadcast Channel 2-1492-382-119 23
49、2.4.8.3.2.3.2.1.1 Encoding 2-1492-382-119 24 2.4.8.3.2.3.2.1.2 Scrambling .2-1492-382-119 25 2.4.8.3.2.3.2.1.3 Channel Interleaving 2-1502-382-120 26 2.4.8.3.2.3.2.1.4 Repetition and Truncation 2-1542-382-124 27 2.4.8.3.2.3.2.1.5 Modulation .2-1542-382-124 28 2.4.8.3.2.3.2.1.6 Guard Tone Insertion .2-1562-382-126 29 2.4.8.3.2.3.2.1.7 Pilot Tone Insertion 2-1572-382-127 30 2.4.8.3.2.3.2.1.8 Frequency Domain Spreading.2-1632-382-133 31 2.4.8.3.2.3.2.1.9 IFFT2-1642-382-134 32 CONTENTS TIA-1006
