1、 TIA STANDARD Signaling Conformance TestSpecification for Over-the-Air Service Provisioning TIA-1044 February 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of NOTICE TIA Engineering Standards and Publications are designe
2、d to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existenc
3、e of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA memb
4、ers, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties a
5、dopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applic
6、ability of regulatory limitations before its use. (From Standards Proposal No. 3-0164-1, formulated under the cognizance of the TIA TR-45.5 Subcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulev
7、ard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/s
8、tandards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to repro
9、duce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is n
10、o assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of
11、 intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from t
12、he holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which
13、are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Docume
14、nt or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIM
15、ED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONS
16、IBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO CO
17、MPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS,
18、LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS
19、 HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-1044 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 i CONTENTS 1 Introduction 1-1 1.1 Ge
20、neral Description . 1-1 1.2 References 1-2 1.2.1 Normative References . 1-2 1.3 Definitions, Symbols and Abbreviations . 1-3 1.3.1 Supplementary Terms and Definitions 1-3 1.4 Setup and Channel conditions 1-9 2 OTASP/OTAPA Test. 2-1 2.1 User-initiated Procedure 2-2 2.1.1 OTASP Service Request Process
21、ing 2-2 2.2 Network-initiated Procedure 2-4 2.2.1 OTAPA Service Request Processing Message not expected in this mode . 2-4 2.2.2 OTAPA Service Request Processing Operation Successful . 2-5 2.2.3 OTAPA Service Request Processing OTAPA Request received during Voice Call 2-7 2.3 NAM Configuration Proce
22、ssing. 2-9 2.3.1 NAM Configuration Processing Mobile Station Locked 2-9 2.3.2 NAM Configuration Processing BLOCK_ID value not supported .2-11 2.3.3 NAM Configuration Processing Operation Successful .2-12 2.4 NAM Download Processing .2-14 2.4.1 NAM Download Processing BLOCK_ID value not supported .2-
23、14 2.4.2 NAM Download Processing SID/NID length mismatch .2-15 2.4.3 NAM Download Processing Operation Successful .2-16 2.5 SSPR Configuration Processing2-18 2.5.1 SSPR Configuration Processing Mobile Station Locked.2-18 2.5.2 SSPR Configuration Processing BLOCK_ID value not supported .2-20 2.5.3 SS
24、PR Configuration Processing Data size mismatch 2-21 2.5.4 SSPR Configuration Processing Operation Successful .2-23 2.6 SSPR Download Processing .2-25 2.6.1 SSPR Download Processing BLOCK_ID value not supported .2-25 2.6.2 SSPR Download Processing Data size mismatch2-27 2.6.3 SSPR Download Processing
25、 Preferred Roaming List length mismatch 2-29 2.6.4 SSPR Download Processing CRC error 2-31 2.6.5 SSPR Download Processing Operation Successful .2-32 2.7 PUZL Configuration Processing.2-34 2.7.1 PUZL Configuration Processing Mobile Station Locked2-34 2.7.2 PUZL Configuration Processing BLOCK_ID value
26、 not supported.2-36 2.7.3 PUZL Configuration Processing Data size mismatch2-37 2.7.4 PUZL Configuration Processing User Zone not in PUZL.2-39 2.7.5 PUZL Configuration Processing No entries in PUZL .2-41 2.7.6 PUZL Configuration Processing Operation Successful.2-42 2.8 PUZL Download Processing.2-44 2
27、.8.1 PUZL Download Processing BLOCK_ID value not supported 2-44 TIA-1044 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ii 2.8.2 PUZL Download Processing Data size mismatch 2-4
28、6 2.8.3 PUZL Download Processing User zone already in PUZL 2-47 2.8.4 PUZL Download Processing User Zone not in PUZL 2-48 2.8.5 PUZL Download Processing Operation Successful 2-49 2.9 3GPD Configuration Processing 2-51 2.9.1 3GPD Configuration Processing Mobile Station Locked . 2-51 2.9.2 3GPD Config
29、uration Processing BLOCK_ID value not supported 2-53 2.9.3 3GPD Configuration Processing Operation Successful 2-54 2.10 3GPD Download Processing 2-56 2.10.1 3GPD Download Processing BLOCK_ID value not supported 2-56 2.10.2 3GPD Download Processing Data size mismatch 2-57 2.10.3 3GPD Download Process
30、ing Operation mode mismatch . 2-58 2.10.4 3GPD Download Processing SimpleIP MAX_NUM_NAI mismatch 2-59 2.10.5 3GPD Download Processing SimpleIP MAX_NAI_LENGTH mismatch . 2-60 2.10.6 3GPD Download Processing MobileIP MAX_NUM_NAI mismatch 2-61 2.10.7 3GPD Download Processing MobileIP MAX_NAI_LENGTH mis
31、match. 2-62 2.10.8 3GPD Download Processing SimpleIP PAP MAX_SS_LENGTH mismatch 2-63 2.10.9 3GPD Download Processing SimpleIP CHAP MAX_SS_LENGTH mismatch 2-64 2.10.10 3GPD Download Processing MAX_MN-AAA_SS_LENGTH mismatch . 2-66 2.10.11 3GPD Download Processing MAX_MN-HA_SS_LENGTH mismatch 2-67 2.10
32、.12 3GPD Download Processing MN-AAA_AUTH_ALGORITHM mismatch 2-68 2.10.13 3GPD Download Processing MN-HA_AUTH_ALGORITHM mismatch. 2-69 2.10.14 3GPD Download Processing SimpleIP ACT_NAI_ENTRY_INDEX mismatch 2-70 2.10.15 3GPD Download Processing MobileIP ACT_NAI_ENTRY_INDEX mismatch 2-72 2.10.16 3GPD D
33、ownload Processing SimpleIP PAP NAI_ENTRY_INDEX mismatch 2-74 2.10.17 3GPD Download Processing SimpleIP CHAP NAI_ENTRY_INDEX mismatch 2-76 2.10.18 3GPD Download Processing MobileIP NAI_ENTRY_INDEX mismatch. 2-78 2.10.19 3GPD Download Processing Operation Successful 2-79 2.11 Key Exchange 2-81 2.11.1
34、 Key Exchange Protocol version mismatch . 2-81 2.11.2 Key Exchange Operation Successful 2-83 2.12 Service Programming Lock 2-85 2.12.1 Service Programming Lock BLOCK_ID value not supported 2-85 2.12.2 Service Programming Lock Out-of-range parameter. 2-86 2.12.3 Service Programming Lock Invalid SPC.
35、2-87 2.12.4 Service Programming Lock Mobile Station Locked 2-88 2.12.5 Service Programming Lock SPC change accepted by the user 2-89 2.12.6 Service Programming Lock SPC change denied by the user. 2-90 2.12.7 Service Programming Lock Operation Successful 2-92 2.13 Secure Mode 2-94 2.13.1 Secure Mode
36、Mobile Station Locked . 2-94 2.13.2 Secure Mode Operation Successful 2-95 2.14 Unknown OTASP Data Message Handling . 2-97 TIA-1044 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 6
37、0 iii 2.14.1 Unknown OTASP Data Message Handling2-97 2.15 Termination of the Programming Procedure.2-98 2.15.1 OTAPA Service Request Processing Interrupted by User Action2-98 2.15.2 More than five SPC Validations.2-100 2.15.3 More than five SPASM validations2-102 2.15.4 Program Session was Cancelled
38、 by User Action2-104 TIA-1044 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 iv LIST OF FIGURES Figure 1 Functional Setup for Testing OTASP 1-9 TIA-1044 1 2 3 4 5 6 7 8 9 10 11
39、 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 v LIST OF TABLES Table 1. OTASP/OTAPA Tests. 2-1 TIA-1044 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 3
40、5 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 vi FOREWORD (This foreword is not part of this Standard.) This Specification was prepared by Technical Specification Group C of the Third Generation Partnership Project 2 (3GPP2). This Specification is the first revision of
41、 the document and tests the signaling conformance requirements of C.S0016-C (Over-the-Air Service Provisioning of Mobile Stations in Spread Spectrum Systems). Tests related to the over-the-air service provisioning of mobile equipment identifier enabled mobile stations are contained in 3. Other signa
42、ling conformance specifications such as C.S0043-0 (Signaling Conformance Test Specification for cdma2000 Spread Spectrum Systems) do not cover Over-the-Air Service Provisioning signaling conformance tests. SCOPE The objective of these tests is to demonstrate mobile station or base station compliance
43、 to over-the-air messaging and protocol requirements in the cdma2000 family of standards, with emphasis on reference 1, indicated in the Traceability sections of each test case. This standard does not address all possible test cases. “cdma2000is the trademark for the technical nomenclature for certa
44、in specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States.” TIA-1044 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
45、19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 vii No text.TIA-1044 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
46、55 56 57 58 59 60 1-1 1 Introduction 1.1 General Description This specification defines OTASP signaling conformance tests for CDMA base stations and mobile stations. In this document, mobile station refers to a subscriber terminal, handset, PDA, wireless local loop unit, or any other subscriber term
47、inal that communicates with the base station at the air interface. Base station refers to the composite functionality of the base station and connected network elements or emulators. Execution Strategy: Separate signaling conformance tests are specified for mobile stations and base stations. Tests a
48、re typically performed using an emulator to interface with the unit under test, with a cabled connection for the RF interface. Any test should be executed only if unit under test supports corresponding feature. TIA-1044 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
49、 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 1-2 1.2 References 1.2.1 Normative References The following standards are referenced in this text. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated be
