1、 TIA STANDARD Minimum Performance Specification for Terrestrial Mobile Multimedia Multicast Forward Link Only Devices TIA-1102 December 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Telecommu
2、nications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufactur
3、ers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or no
4、n-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by
5、TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safe
6、ty problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0239, formulated
7、under the cognizance of the TIA, TR-47.1 Subcommittee on Terrestrial Mobile Multimedia Multicast based on Forward Link Only Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to cu
8、rrent Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Information Handling Services, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A.
9、 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (i
10、ncluding posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.t
11、iaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the
12、standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consist
13、ing of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or v
14、alidity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or repr
15、esent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or
16、publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or inve
17、stigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Info
18、rmation as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspe
19、ct, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATEN
20、ESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH A
21、NY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for Resale
22、No reproduction or networking permitted without license from IHS-,-,-TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMA
23、GES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A F
24、UNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
25、TIA-1102 Minimum Performance Specification for TM3 Forward Link Only Devices CONTENTS i FOREWORD. xiii 1 NORMATIVE REFERENCES xv 2 1 OVERVIEW .1-1 3 1.1 Scope of This Document 1-1 4 1.2 Requirements Language 1-1 5 1.3 Terms and Definitions. 1-1 6 1.4 Forward Link Only Equations 1-5 7 1.4.1 Transmit
26、Power1-5 8 1.4.2 Signal to Noise Ratio 1-5 9 1.4.3 Signal to Interference Ratio (SIR)1-6 10 2 STANDARD RADIATED EMISSIONS MEASUREMENT PROCEDURE 2-1 11 2.1 Standard Radiation Test Site .2-1 12 2.2 Search Antenna.2-1 13 2.3 Field-Strength Measurement2-2 14 2.4 Frequency Range of Measurements2-2 15 2.5
27、 Test Ranges.2-2 16 2.5.1 30-Meter Test Range2-2 17 2.5.2 3-Meter Test Range2-2 18 2.6 Radiated Signal Measurement Procedure .2-3 19 3 PHYSICAL LAYER MINIMUM STANDARD.3-1 20 3.1 Receiver Minimum Standards 3-1 21 3.1.1 Frequency Coverage Requirements.3-1 22 3.1.2 Demodulation Requirements3-1 23 3.1.2
28、.1 Demodulation of Data Channel.3-2 24 3.1.2.1.1 Wide-area Data Channel Demodulation in AWGN3-2 25 3.1.2.1.1.1 Definition .3-2 26 3.1.2.1.1.2 Method of Measurement .3-2 27 3.1.2.1.1.3 Minimum Standard.3-5 28 3.1.2.1.2 Wide-area Data Channel Demodulation in Multipath Fading 29 Channel 3-7 30 3.1.2.1.
29、2.1 Definition .3-7 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Minimum Performance Specification TIA-1102 for TM3 Forward Link Only Devices CONTENTS ii 3.1.2.1.2.2 Metho
30、d of Measurement .3-8 1 3.1.2.1.2.3 Minimum Standard 3-11 2 3.1.2.1.3 Wide-area Data Channel Demodulation under Fading and Co-3 channel Interference . 3-14 4 3.1.2.1.3.1 Definition. 3-14 5 3.1.2.1.3.2 Method of Measurement . 3-14 6 3.1.2.1.3.3 Minimum Standard 3-15 7 3.1.2.1.4 Wide-area Data Channel
31、 Demodulation under Local-area Changes . 3-16 8 3.1.2.1.4.1 Definition. 3-16 9 3.1.2.1.4.2 Method of Measurement . 3-16 10 3.1.2.1.4.3 Minimum Standard 3-17 11 3.1.2.1.5 Wide-area Data Channel Demodulation following Wide-area 12 Change . 3-17 13 3.1.2.1.5.1 Definition. 3-17 14 3.1.2.1.5.2 Method of
32、Measurement . 3-18 15 3.1.2.1.5.3 Minimum Standard 3-19 16 3.1.2.1.6 Local-area Data Channel Demodulation following Local-area 17 Changes 3-19 18 3.1.2.1.6.1 Definition. 3-19 19 3.1.2.1.6.2 Method of Measurement . 3-19 20 3.1.2.1.6.3 Minimum Standard 3-21 21 3.1.2.2 Demodulation of Wide-area OIS Cha
33、nnel 3-21 22 3.1.2.2.1 Wide-area OIS Channel Demodulation in AWGN. 3-21 23 3.1.2.2.1.1 Definition. 3-21 24 3.1.2.2.1.2 Method of Measurement . 3-21 25 3.1.2.2.1.3 Minimum Standard 3-22 26 3.1.2.2.2 Wide-area OIS Channel Demodulation in Multipath Fading 27 Channel 3-23 28 3.1.2.2.2.1 Definition. 3-23
34、 29 3.1.2.2.2.2 Method of Measurement . 3-23 30 3.1.2.2.2.3 Minimum Standard 3-23 31 3.1.2.2.3 Local-area OIS Channel Demodulation under Fading and Co-32 channel Interference . 3-24 33 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproducti
35、on or networking permitted without license from IHS-,-,-TIA-1102 Minimum Performance Specification for TM3 Forward Link Only Devices CONTENTS iii 3.1.2.2.3.1 Definition .3-24 1 3.1.2.2.3.2 Method of Measurement .3-24 2 3.1.2.2.3.3 Minimum Standard.3-25 3 3.1.2.3 Demodulation of WIC and LIC 3-25 4 3.
36、1.2.3.1 WIC and LIC Demodulation in Multipath Fading and Co-channel 5 Interference.3-25 6 3.1.2.3.1.1 Definition .3-25 7 3.1.2.3.1.2 Method of Measurement .3-26 8 3.1.2.3.1.3 Minimum Standard.3-26 9 3.1.3 Receiver Performance.3-27 10 3.1.3.1 Receiver Sensitivity and Dynamic Range.3-27 11 3.1.3.1.1 D
37、efinition .3-27 12 3.1.3.1.2 Method of Measurement .3-27 13 3.1.3.1.3 Minimum Standard 3-28 14 3.1.3.2 Intermodulation Spurious Response Attenuation 3-28 15 3.1.3.2.1 Definition .3-28 16 3.1.3.2.2 Method of Measurement .3-28 17 3.1.3.2.3 Minimum Standard 3-29 18 3.1.3.3 Adjacent Channel Selectivity
38、3-29 19 3.1.3.3.1 Definition .3-29 20 3.1.3.3.2 Method of Measurement .3-29 21 3.1.3.3.3 Minimum Standard 3-31 22 3.1.3.4 Receiver Blocking Characteristics.3-31 23 3.1.3.4.1 Definition .3-31 24 3.1.3.4.2 Method of Measurement .3-32 25 3.1.3.4.3 Minimum Standard 3-33 26 3.1.3.5 Limitations on Emissio
39、ns .3-33 27 3.1.3.5.1 Conducted Spurious Emissions 3-33 28 3.1.3.5.1.1 Definition .3-33 29 3.1.3.5.1.2 Method of Measurement .3-33 30 3.1.3.5.1.3 Minimum Standard.3-34 31 3.1.3.5.2 Radiated Spurious Emissions .3-34 32 Copyright Telecommunications Industry Association Provided by IHS under license wi
40、th EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Minimum Performance Specification TIA-1102 for TM3 Forward Link Only Devices CONTENTS iv 3.1.3.5.2.1 Definition. 3-34 1 3.1.3.5.2.2 Method of Measurement . 3-34 2 3.1.3.5.2.3 Minimum Standard 3-34 3 4 MAC LAYER
41、MINIMUM STANDARD.4-1 4 4.1 Data Channel MAC Protocol 4-1 5 4.1.1 Demodulation of Data Channel MAC Layer Packets4-1 6 4.1.1.1 Performance of Wide-area Data Channel with Reed-Solomon coding in 7 Multipath Fading Channel .4-1 8 4.1.1.1.1 Definition.4-1 9 4.1.1.1.2 Method of Measurement.4-1 10 4.1.1.1.3
42、 Minimum Standard4-3 11 5 ENVIRONMENTAL REQUIREMENTS.5-1 12 5.1 Temperature and Power Supply Voltage.5-1 13 5.1.1 Definition 5-1 14 5.1.2 Method of Measurement 5-1 15 5.1.3 Minimum Standard .5-2 16 5.2 High Humidity 5-2 17 5.2.1 Definition 5-2 18 5.2.2 Method of Measurement 5-2 19 5.2.3 Minimum Stan
43、dard .5-2 20 5.3 Vibration Stability .5-2 21 5.3.1 Definition 5-2 22 5.3.2 Method of Measurement 5-2 23 5.3.3 Minimum Standard .5-3 24 5.4 Shock Stability5-3 25 5.4.1 Definition 5-3 26 5.4.2 Method of Measurement 5-3 27 5.4.3 Minimum Standard .5-3 28 6 STANDARD TEST CONDITIONS 6-1 29 6.1 Standard Eq
44、uipment.6-1 30 6.1.1 Basic Equipment.6-1 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1102 Minimum Performance Specification for TM3 Forward Link Only Devices CONTENTS
45、 v 6.1.2 Associated Equipment6-1 1 6.2 Standard Environmental Test Conditions.6-1 2 6.3 Standard Conditions for the Primary Power Supply 6-1 3 6.3.1 General6-1 4 6.3.2 Standard DC Test Voltage from Accumulator Batteries .6-1 5 6.3.3 Standard AC Test Voltage and Frequency.6-2 6 6.4 Standard Test Equi
46、pment6-2 7 6.4.1 Standard Channel Simulator6-2 8 6.4.1.1 Standard Channel Simulator Configuration. .6-4 9 6.4.2 Forward Link Only Network Equipment6-8 10 6.4.2.1 Transmitter Equipment 6-8 11 6.4.2.2 Protocol Support 6-8 12 6.4.2.3 Timing Signals .6-8 13 6.4.2.4 General Requirements6-8 14 6.4.3 AWGN
47、Generator .6-9 15 6.4.4 CW Generator6-9 16 6.4.5 Spectrum Analyzer.6-9 17 6.4.6 Average Power Meter6-10 18 6.5 Functional System Setups .6-11 19 6.5.1 Functional Block Diagrams 6-11 20 7 INFORMATIVE ANNEX A: CONFIDENCE INTERVAL 7-1 21 7.1 Confidence Level of Error Rate .7-1 22 7.2 Uncertainty in Pow
48、er Measurement During Fading.7-4 23 7.3 Other Considerations for Dynamic Channels7-5 24 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Minimum Performance Specification TIA-110
49、2 for TM3 Forward Link Only Devices CONTENTS vi No text. 1 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1102 Minimum Performance Specification for TM3 Forward Link Only Dev
