1、 TIA-1102-A (Revision of TIA-1102) April 2009 Minimum Performance Specification for Terrestrial Mobile Multimedia Multicast Forward Link Only Devices NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturer
2、s and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-
3、member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TI
4、A in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety
5、 problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0244-RV1, formulate
6、d under the cognizance of the TIA, TR-47 Terrestrial Mobile Multimedia Multicast. TR-47.1 Subcommittee onTerrestrial Mobile Multimedia Multicast based on Forward Link Only Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arli
7、ngton, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS USA and Canada (1-800-525-7052 ) International (303-790-0600) or search online at http:/www.tiaonline.org/standards/catalog/ All rights rese
8、rved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please cont
9、act TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document wi
10、ll be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“
11、IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested,
12、all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties
13、involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Docum
14、ent contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory
15、, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of v
16、oluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent
17、(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRES
18、S OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISC
19、LAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR P
20、RODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAG
21、ES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT O
22、F THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Minimum Performance Specification TIA-1102-A for TM3 Forward Link Only Devices CONTENTS i FOREWORD xv 1 NORMATIVE REFERENCES xvii 2 1 OVERVIEW . 1-1 3 1.1 Scope of This Document 1-1 4 1.2 Req
23、uirements Language 1-2 5 1.3 Terms and Definitions. 1-2 6 1.4 Forward Link Only Equations 1-6 7 1.4.1 Transmit Power . 1-6 8 1.4.2 Signal to Noise Ratio 1-7 9 1.4.3 Signal to Interference Ratio (SIR) . 1-7 10 2 STANDARD RADIATED EMISSIONS MEASUREMENT PROCEDURE . 2-1 11 2.1 Standard Radiation Test Si
24、te . 2-1 12 2.2 Search Antenna . 2-1 13 2.3 Field-Strength Measurement . 2-2 14 2.4 Frequency Range of Measurements . 2-2 15 2.5 Test Ranges . 2-2 16 2.5.1 30-Meter Test Range 2-2 17 2.5.2 3-Meter Test Range 2-2 18 2.6 Radiated Signal Measurement Procedure . 2-3 19 3 PHYSICAL LAYER MINIMUM STANDARD
25、3-1 20 3.1 Receiver Minimum Standards 3-1 21 3.1.1 Frequency Coverage Requirements 3-1 22 3.1.2 Demodulation Requirements . 3-1 23 3.1.2.1 Demodulation of Data Channel 3-2 24 3.1.2.1.1 Wide-area Data Channel Demodulation in AWGN 3-2 25 3.1.2.1.1.1 Definition . 3-2 26 3.1.2.1.1.2 Method of Measuremen
26、t . 3-2 27 3.1.2.1.1.3 Minimum Standard 3-6 28 3.1.2.1.2 Wide-area Data Channel Demodulation in Multipath Fading 29 Channel 3-8 30 TIA-1102-A Minimum Performance Specification for TM3 Forward Link Only Devices CONTENTS ii 3.1.2.1.2.1 Definition . 3-8 1 3.1.2.1.2.2 Method of Measurement 3-9 2 3.1.2.1
27、.2.3 Minimum Standard 3-17 3 3.1.2.1.3 Wide-area Data Channel Demodulation under Fading and Co-4 channel Interference . 3-25 5 3.1.2.1.3.1 Definition . 3-25 6 3.1.2.1.3.2 Method of Measurement 3-25 7 3.1.2.1.3.3 Minimum Standard 3-27 8 3.1.2.1.4 Wide-area Data Channel Demodulation under Local-area C
28、hanges . 3-30 9 3.1.2.1.4.1 Definition . 3-30 10 3.1.2.1.4.2 Method of Measurement 3-30 11 3.1.2.1.4.3 Minimum Standard 3-31 12 3.1.2.1.5 Wide-area Data Channel Demodulation following Wide-area 13 Change . 3-32 14 3.1.2.1.5.1 Definition . 3-32 15 3.1.2.1.5.2 Method of Measurement 3-32 16 3.1.2.1.5.3
29、 Minimum Standard 3-34 17 3.1.2.1.6 Local-area Data Channel Demodulation following Local-area 18 Changes 3-34 19 3.1.2.1.6.1 Definition . 3-34 20 3.1.2.1.6.2 Method of Measurement 3-34 21 3.1.2.1.6.3 Minimum Standard 3-36 22 3.1.2.2 Demodulation of Wide-area OIS Channel . 3-36 23 3.1.2.2.1 Wide-area
30、 OIS Channel Demodulation in AWGN 3-36 24 3.1.2.2.1.1 Definition . 3-36 25 3.1.2.2.1.2 Method of Measurement 3-36 26 3.1.2.2.1.3 Minimum Standard 3-37 27 3.1.2.2.2 Wide-area OIS Channel Demodulation in Multipath Fading 28 Channel 3-37 29 3.1.2.2.2.1 Definition . 3-37 30 3.1.2.2.2.2 Method of Measure
31、ment 3-38 31 3.1.2.2.2.3 Minimum Standard 3-38 32 Minimum Performance Specification TIA-1102-A for TM3 Forward Link Only Devices CONTENTS iii 3.1.2.2.3 Local-area OIS Channel Demodulation under Fading and Co-1 channel Interference . 3-39 2 3.1.2.2.3.1 Definition . 3-39 3 3.1.2.2.3.2 Method of Measur
32、ement . 3-39 4 3.1.2.2.3.3 Minimum Standard 3-40 5 3.1.2.3 Demodulation of WIC and LIC 3-41 6 3.1.2.3.1 WIC and LIC Demodulation in Multipath Fading and Co-channel 7 Interference . 3-41 8 3.1.2.3.1.1 Definition . 3-41 9 3.1.2.3.1.2 Method of Measurement . 3-41 10 3.1.2.3.1.3 Minimum Standard 3-43 11
33、 3.1.3 Receiver Performance 3-44 12 3.1.3.1 Receiver Sensitivity and Dynamic Range 3-44 13 3.1.3.1.1 Definition . 3-44 14 3.1.3.1.2 Method of Measurement . 3-45 15 3.1.3.1.3 Minimum Standard 3-46 16 3.1.3.2 Intermodulation Spurious Response Attenuation . 3-46 17 3.1.3.2.1 Definition . 3-46 18 3.1.3.
34、2.2 Method of Measurement . 3-46 19 3.1.3.2.3 Minimum Standard 3-47 20 3.1.3.3 Adjacent Channel Selectivity 3-47 21 3.1.3.3.1 Definition . 3-47 22 3.1.3.3.1.1 PAL Signal 3-48 23 3.1.3.3.1.2 SECAM L Signal . 3-49 24 3.1.3.3.1.3 DVB-T Signal . 3-49 25 3.1.3.3.1.4 ATSC Test Signal 3-49 26 3.1.3.3.1.5 N
35、TSC Test Signal 3-50 27 3.1.3.3.2 Method of Measurement . 3-50 28 3.1.3.3.3 Minimum Standard 3-54 29 3.1.3.4 Receiver Blocking Characteristics 3-54 30 TIA-1102-A Minimum Performance Specification for TM3 Forward Link Only Devices CONTENTS iv 3.1.3.4.1 Definition . 3-54 1 3.1.3.4.2 Method of Measurem
36、ent 3-54 2 3.1.3.4.3 Minimum Standard . 3-57 3 3.1.3.5 Co-channel Tone Interference Test . 3-57 4 3.1.3.5.1 Definition . 3-57 5 3.1.3.5.2 Definition . 3-57 6 3.1.3.5.3 Minimum Standard . 3-58 7 3.1.3.6 Limitations on Emissions 3-58 8 3.1.3.6.1 Conducted Spurious Emissions . 3-58 9 3.1.3.6.1.1 Defini
37、tion . 3-58 10 3.1.3.6.1.2 Method of Measurement 3-58 11 3.1.3.6.1.3 Minimum Standard 3-59 12 3.1.3.6.2 Radiated Spurious Emissions 3-59 13 3.1.3.6.2.1 Definition . 3-59 14 3.1.3.6.2.2 Method of Measurement 3-59 15 3.1.3.6.2.3 Minimum Standard 3-60 16 4 MAC LAYER MINIMUM STANDARD 4-1 17 4.1 Data Cha
38、nnel MAC Protocol 4-1 18 4.1.1 Demodulation of Data Channel MAC Layer Packets . 4-1 19 4.1.1.1 Performance of Wide-area Data Channel with Reed-Solomon coding in 20 Multipath Fading Channel . 4-1 21 4.1.1.1.1 Definition . 4-1 22 4.1.1.1.2 Method of Measurement 4-2 23 4.1.1.1.3 Minimum Standard . 4-7
39、24 5 ENVIRONMENTAL REQUIREMENTS . 5-1 25 5.1 Temperature and Power Supply Voltage 5-1 26 5.1.1 Definition 5-1 27 5.1.2 Method of Measurement 5-1 28 5.1.3 Minimum Standard . 5-2 29 5.2 High Humidity 5-2 30 5.2.1 Definition 5-2 31 Minimum Performance Specification TIA-1102-A for TM3 Forward Link Only
40、Devices CONTENTS v 5.2.2 Method of Measurement 5-2 1 5.2.3 Minimum Standard . 5-2 2 5.3 Vibration Stability . 5-2 3 5.3.1 Definition . 5-2 4 5.3.2 Method of Measurement 5-2 5 5.3.3 Minimum Standard . 5-3 6 5.4 Shock Stability 5-3 7 5.4.1 Definition . 5-3 8 5.4.2 Method of Measurement 5-3 9 5.4.3 Min
41、imum Standard . 5-3 10 6 STANDARD TEST CONDITIONS 6-1 11 6.1 Standard Equipment . 6-1 12 6.1.1 Basic Equipment . 6-1 13 6.1.2 Associated Equipment . 6-1 14 6.2 Standard Environmental Test Conditions 6-1 15 6.3 Standard Conditions for the Primary Power Supply . 6-1 16 6.3.1 General 6-1 17 6.3.2 Stand
42、ard DC Test Voltage from Accumulator Batteries 6-1 18 6.3.3 Standard AC Test Voltage and Frequency 6-2 19 6.4 Standard Test Equipment 6-2 20 6.4.1 Standard Channel Simulator . 6-2 21 6.4.1.1 Standard Channel Simulator Configuration. 6-4 22 6.4.2 Forward Link Only Network Equipment . 6-10 23 6.4.2.1
43、Transmitter Equipment 6-10 24 6.4.2.2 Protocol Support 6-11 25 6.4.2.3 Timing Signals . 6-11 26 6.4.2.4 General Requirements . 6-11 27 6.4.3 AWGN Generator . 6-11 28 6.4.4 CW Generator 6-11 29 6.4.5 Spectrum Analyzer 6-12 30 TIA-1102-A Minimum Performance Specification for TM3 Forward Link Only Devi
44、ces CONTENTS vi 6.4.6 Average Power Meter . 6-13 1 6.5 Functional System Setups . 6-13 2 6.5.1 Functional Block Diagrams . 6-13 3 7 INFORMATIVE ANNEX A: CONFIDENCE INTERVAL . 7-1 4 7.1 Confidence Level of Error Rate 7-1 5 7.2 Uncertainty in Power Measurement During Fading . 7-3 6 7.3 Other Considera
45、tions for Dynamic Channels . 7-5 7 8 Minimum Performance Specification TIA-1102-A for TM3 Forward Link Only Devices TABLES vii Table 3.1-1 Device Reception Sub-band . 3-1 1 Table 3.1.2-1. Recommended Channel Number and Center frequency fcfor 2 Demodulation Tests 3-2 3 Table 3.1.2.1.1.2-1. Test Param
46、eters for Forward Link Only Wide-area Data 4 Channel Demodulation in AWGN (Part 1 of 5) . 3-4 5 Table 3.1.2.1.1.2-2. Test Parameters for Forward Link Only Wide-area Data 6 Channel Demodulation in AWGN (Part 2 of 5) . 3-5 7 Table 3.1.2.1.1.2-3. Test Parameters for Forward Link Only Wide-area Data 8 C
47、hannel Demodulation in AWGN (Part 3 of 5) . 3-5 9 Table 3.1.2.1.1.2-4. Test Parameters for Forward Link Only Wide-area Data 10 Channel Demodulation in AWGN (Part 4 of 5) . 3-5 11 Table 3.1.2.1.1.2-5. Test Parameters for Forward Link Only Wide-area Data 12 Channel Demodulation in AWGN (Part 5 of 5) .
48、 3-6 13 Table 3.1.2.1.1.3-1. Minimum Standard for Data Channel Performance in AWGN 14 (Part 1 of 2) . 3-7 15 Table 3.1.2.1.1.3-2. Minimum Standard for Data Channel Performance in AWGN 16 (Part 2 of 2) . 3-8 17 Table 3.1.2.1.2.1-1. Fading Channel Test Cases . 3-9 18 Table 3.1.2.1.2.2-1A. Test Paramet
49、ers for 6 MHz Wide Forward Link Only Wide-area 19 Data Channel Demodulation in Fading Channel (Case 1, Part 1 of 2) . 3-11 20 Table 3.1.2.1.2.2-1B Test Parameters for 8 MHz Wide Forward Link Only Wide-area 21 Data Channel Demodulation in Fading Channel (Case 1, Part 1 of 2) . 3-11 22 Table 3.1.2.1.2.2-2A. Test Parameters for 6 MHz Wide Forward Link Only Wide-area 23 Data Channel Demodulation in Fading Channel (Case 1, Part 2 of 2) . 3-11 24 Table 3.1.2.1.2.2-2B. Test Parameters for 8 MHz Wide Forward Link Only Wide-area 25 Data Channel Demodulation in Fading Channel (Case 1, Part 2 of
