1、 TIA-1121.000-A (Revision of TIA-1121.000)May 2009 Overview for Ultra Mobile Broadband (UMB) TDD Air Interface SpecificationNOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilita
2、ting interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufac
3、turing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the A
4、merican National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with
5、its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0272.000-RV1, formulated under the cognizance
6、 of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents
7、of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and calle
8、d to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of an
9、y licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have be
10、en complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, rec
11、ommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating
12、to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO sh
13、all not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims
14、of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEME
15、NT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF
16、THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL
17、INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUC
18、H DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0084-000-A v1.0 CONTENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 FO
19、REWORD.ixNOTES .1-1REFERENCES1-11 Overview .1-1 1.1 Scope of This Document1-1 1.2 Architecture Reference Model 1-2 1.3 Protocol Architecture.1-3 1.3.1 Layers1-3 1.3.2 Protocols1-5 1.3.2.1 Physical Layer1-5 1.3.2.2 MAC Layer .1-5 1.3.2.3 Radio Link Layer1-6 1.3.2.4 Application Layer.1-7 1.3.2.5 Secur
20、ity Functions.1-7 1.3.2.6 Connection Control Plane 1-8 1.3.2.7 Session Control Plane 1-8 1.3.2.8 Route Control Plane.1-9 1.3.2.9 Broadcast-Multicast Service (BCMCS) Upper Layer Protocols.1-9 1.4 Protocol Interfaces.1-10 1.5 Protocol Data.1-11 1.6 Protocol States 1-11 1.7 Protocol Set Identifier 1-12
21、 1.8 Protocol Instances and Personalities1-12 1.9 Sessions and Connections.1-13 1.10 Security.1-13 1.11 Requirements Language 1-13 1.12 Notation 1-13 1.13 Malfunction Detection .1-15 2 Common Procedures .2-1 2.1 Protocol Initialization for the InConfiguration Protocol Instance.2-1 2.2 Protocol Initi
22、alization for the InUse Protocol Instance 2-1 iii 3GPP2 C.S0084-000-A v1.0 CONTENTS 2.3 Hard Commit Procedures 2-2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 2.4 Soft Commit Procedures2-2 2.5 Hash Function 2-2 2.6 Pseudorandom Number Generator 2-3 2.6.1 General Procedures .2-3 2.6.2
23、 Initialization 2-3 2.7 Sequence Number Validation 2-3 2.8 AttributeID numbering2-4 3 Common Data Structures .3-1 3.1 Channel Record 3-1 3.1.1 SystemTypeSpecificFields when SystemType is 0x00.3-1 3.1.2 SystemTypeSpecificFields when SystemType is 0x01, 0x02, or 0x03 .3-3 3.2 Neighbor Technology Recor
24、d .3-4 3.3 Access Terminal Identifier Record .3-5 3.4 Attribute Record3-6 3.5 Non-attribute Data Record 3-8 3.6 Session State Information Record3-8 4 Assigned Names and Numbers4-1 5 ANID, SectorID, and UATI provisioning .5-1 5.1 ANID Construction5-1 5.2 SectorID Construction.5-1 5.3 UATI Constructio
25、n 5-1 iv 3GPP2 C.S0084-000-A v1.0 FIGURES Figure 1-1. UMB Air Interface Specification Document Structure .1-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Figure 1-2. Architecture Reference Model.1-2 Figure 1-3. Unicast Route Layering Architecture 1-3 Figure 1-4. BCMCS Route Layering Architecture1-4 Figure 1
26、-5. Physical Layer Protocols.1-5 Figure 1-6. MAC Layer Protocols .1-5 Figure 1-7. Radio Link Layer Protocols.1-6 Figure 1-8. Application Layer Protocols 1-7 Figure 1-9. Security Protocols 1-7 Figure 1-10. Connection Control Plane Protocols1-8 Figure 1-11. Session Control Plane Protocols .1-8 Figure
27、1-12. Route Control Plane Protocols 1-9 Figure 1-13. BCMCS Upper Layer Protocols .1-9 Figure 5-1. ANID Construction as a 6to4 IPv6 Address.5-1 v 3GPP2 C.S0084-000-A v1.0 FIGURES No text.1 vi 3GPP2 C.S0084-000-A v1.0 TABLES Table 3-1. SystemType Encoding3-1 1 2 3 4 5 6 7 8 9 10 11 Table 3-2. ATIType
28、Field Encoding .3-6 Table 3-3. The Format of the Session State Information Record3-9 Table 3-4. Encoding of the ParameterType Field.3-10 Table 4-1. Protocol Type and Subtype for InUse Instance .4-2 Table 4-2. Protocol Type and Subtype for InConfiguration Instance4-3 Table 4-3. Application Layer Prot
29、ocol ID.4-4 Table 4-4. Initial Protocol Set Identifiers.4-5 Table 4-5. BCMCS Initial Protocol Set Identifiers4-5 Table 4-6. Protocol Set Identifier 4-5 vii 3GPP2 C.S0084-000-A v1.0 TABLES 1 No text.viii 3GPP2 C.S0084-000-A v1.0 FOREWORD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 (This foreword
30、is not part of this Standard) This Standard was prepared by Technical Specification Group C of the Third Generation Partnership Project 2 (3GPP2). This Standard is the Overview part of the Ultra Mobile Broadband (UMB)1air interface. Other parts of this Standard are: Physical Layer for Ultra Mobile B
31、roadband (UMB) Air Interface Specification MAC Layer for Ultra Mobile Broadband (UMB) Air Interface Specification Radio Link Layer for Ultra Mobile Broadband (UMB) Air Interface Specification Application Layer for Ultra Mobile Broadband (UMB) Air Interface Specification Security Functions for Ultra
32、Mobile Broadband (UMB) Air Interface Specification Connection Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification Session Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification Route Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification
33、 Broadcast-Multicast Upper Layers for Ultra Mobile Broadband (UMB) Air Interface Specification Other Standards may be required to implement this system and are listed in the References section of each part. This standard provides a specification for land mobile wireless systems based upon cellular p
34、rinciples. This Standard is one part of the IMT-2000 CDMA Multi-Carrier, IMT-2000 CDMA MC, also known as cdma20002. 1Ultra Mobile Broadband and (UMB) are trade and service marks owned by the CDMA Development Group (CDG). 2cdma2000is the trademark for the technical nomenclature for certain specificat
35、ions and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. ix 3GPP2 C.S0084-000-A v1.0 FOREWORD 1 No text.x 3GPP2 C.S0084-000-A
36、 v1.0 REFERENCE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 The following documents contain provisions, which, through reference in this text, constitute provisions of this document. References are either specific (identified by date of
37、 publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP2 document, a non-specific reference implicitly refers to the latest version
38、 of that document in the same Release as the present document. 1 Reserved. 2 C.S0084-001-0, Physical Layer for Ultra Mobile Broadband (UMB) Air Interface Specification. 3 C.S0084-002-0, MAC Layer for Ultra Mobile Broadband (UMB) Air Interface Specification. 4 C.S0084-003-0, Radio Link Layer for Ultr
39、a Mobile Broadband (UMB) Air Interface Specification. 5 C.S0084-004-0, Application Layer for Ultra Mobile Broadband (UMB) Air Interface Specification. 6 C.S0084-005-0, Security Functions for Ultra Mobile Broadband (UMB) Air Interface Specification. 7 C.S0084-006-0, Connection Control Plane for Ultra
40、 Mobile Broadband (UMB) Air Interface Specification. 8 C.S0084-007-0, Session Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification. 9 C.S0084-008-0, Route Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification. 10 C.S0084-009-0, Broadcast-Multicast Upper Lay
41、ers for Ultra Mobile Broadband (UMB) Air Interface Specification 11 C.R1001, Administration of Parameter Value Assignments for cdma2000 Spread Spectrum Standards. (Informative) 12 IETF RFC 3095, Robust Header Compression (ROHC): Framework and four profiles: RTP, UDP, ESP, and uncompressed 13 RFC 791
42、, Internet Protocol, Sept. 1981 14 RFC 2460, Deering, Hindin, Internet Protocol, Version 6 (IPv6) Specification, December 1998 15 RFC 3748, Extensible Authentication Protocol (EAP) 16 C.S0001, Introduction to cdma2000 Standards for Spread Spectrum Systems 17 C.S0024, cdma2000 High Rate Packet Data A
43、ir Interface Specification 18 RFC 3056, Connection of IPv6 Domains via IPv4 Clouds 19 C.S0084-011-0, Physical Layer for Ultra Mobile Broadband TDD (UMB-TDD) Air Interface Specification. xi 3GPP2 C.S0084-000-A v1.0 REFERENCE 1 2 20 C.S0084-012-0, MAC Layer for Ultra Mobile Broadband TDD (UMB-TDD) Air
44、 Interface Specification. xii Overview 3GPP2 C.S0084-000-A v1.0 1 OVERVIEW 1 2 3 4 5 1.1 Scope of This Document The set of documents that form the compatibility specification for UMB air interface systems is shown in Figure 1-1. 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Figure 1-
45、1. UMB Air Interface Specification Document Structure In the following, “this specification” refers to the set of documents shown in Figure 1-1. The requirements in this specification ensure that a compliant access terminal can obtain service through any access networks conforming to this specificat
46、ion. These requirements do not address the quality or reliability of that service, nor do they cover equipment performance or measurement procedures. This specification is primarily oriented toward requirements necessary for the design and implementation of access terminals. As a result, detailed pr
47、ocedures are specified for access terminals to ensure a uniform response to all access networks. Access network procedures, however, are specified only to the extent necessary for compatibility with those specified for the access terminal. This specification includes provisions for future service ad
48、ditions and expansion of system capabilities. The architecture defined by this specification permits such expansion without the loss of backward compatibility to older access terminals. This specification is based upon spectrum allocations that have been defined by various governmental administratio
49、ns. Those wishing to deploy systems compliant with this specification should also take notice of the requirement to be compliant with the applicable rules and regulations of local administrations. Those wishing to deploy systems compliant with this specification should also take notice of the electromagnetic exposure criteria for the general public and for radio frequency carriers with low frequency amplitude modulation. 1-1 3GPP2 C.S0084-000-A v1.0 Overview 1.2 Architecture Reference Model 1 2 The architecture reference mod
