1、 TIA-1121.006-1-2009 APPROVED: MAY 1, 2009 REAFFIRMED: DECEMBER 2, 2013 TIA-1121.006-1 May 2009Connection Control for Ultra Mobile Broadband (UMB) Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstand
2、ings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect pr
3、eclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publi
4、cations are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purp
5、ort to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of tra
6、demarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. PN-3-0272.006-AD1-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document
7、 will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights
8、 (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requeste
9、d, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parti
10、es involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Do
11、cument contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandat
12、ory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement o
13、f voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Pat
14、ent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXP
15、RESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY D
16、ISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT O
17、R PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DA
18、MAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMEN
19、T OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0084-006-0 v3.0 CONTENTS iii FOREWORD. xxi 1 NOTES . xxiii 2 REFERENCES xxiii 3 No text. .ii 4 1 Introduction1-1 5 1.1 General Overview 1-1 6 2 Basic Air Link Management Protocol
20、.2-1 7 2.1 Overview2-1 8 2.2 Primitives 2-3 9 2.2.1 Commands 2-3 10 2.2.2 Return Indications.2-3 11 2.2.3 Local Common Data 2-4 12 2.2.4 Public Data2-4 13 2.3 Procedures and Messages for the InConfiguration Instance of the Protocol2-4 14 2.3.1 Protocol Initialization.2-4 15 2.3.2 Procedures 2-4 16 2
21、.3.3 Message Formats.2-4 17 2.4 Procedures for the InUse Instance .2-5 18 2.4.1 Initialization and Commit Procedures 2-5 19 2.4.1.1 Initialization Procedures 2-5 20 2.4.1.2 Hard Commit Procedures.2-5 21 2.4.1.3 Soft Commit Procedures 2-5 22 2.4.2 Command Processing 2-5 23 2.4.2.1 OpenConnection 2-5
22、24 2.4.2.2 CloseConnection2-5 25 2.4.2.3 SendRegistration2-6 26 2.4.3 Initialization State .2-6 27 2.4.3.1 Access Terminal Requirements 2-6 28 2.4.3.2 Access Network Requirements .2-7 29 2.4.4 Idle State .2-7 30 2.4.4.1 Access Terminal Requirements 2-7 31 3GPP2 C.S0084-006-0 v3.0 CONTENTS iv 2.4.4.1
23、.1 Procedures for Registration2-8 1 2.4.4.1.1.1 Zone Based Registration 2-8 2 2.4.4.1.1.2 Distance Based Registration 2-8 3 2.4.4.1.1.3 Timer based registration 2-9 4 2.4.4.1.1.4 NetworkCode Based Registration .2-9 5 2.4.4.1.1.5 Registration after loss of coverage 2-9 6 2.4.4.1.2 Procedures for main
24、taining LastRegisteredSector 2-10 7 2.4.4.2 Access Network Requirements.2-10 8 2.4.5 Suspended State .2-10 9 2.4.5.1 Access Terminal Requirements 2-11 10 2.4.5.2 Access Network Requirements.2-11 11 2.4.6 Connected State 2-11 12 2.4.6.1 Access Terminal Requirements 2-11 13 2.4.6.1.1 General Requireme
25、nts .2-11 14 2.4.6.1.2 Connection Failure Processing.2-12 15 2.4.6.1.3 Connected State Cleanup Procedures 2-12 16 2.4.6.2 Access Network Requirements.2-13 17 2.4.6.2.1 General Requirements .2-13 18 2.4.6.2.1.1 Connection Failure Processing .2-13 19 2.4.6.2.2 Connected State Cleanup Procedures 2-13 2
26、0 2.4.7 Common Procedures .2-14 21 2.4.7.1 KeepAlive Procedures 2-14 22 2.4.7.2 Procedures for Maintaining Registration 2-14 23 2.4.7.3 Procedures for Power Down Registration2-15 24 2.4.7.3.1 Access Terminal Procedures 2-15 25 2.4.7.3.2 Access Network Procedures .2-15 26 2.4.7.4 Connection Failure R
27、eporting 2-15 27 2.4.7.5 TuneAway Procedures .2-16 28 2.4.7.5.1 TuneAway Time Calculations.2-16 29 2.4.7.5.2 Procedures for Setting TuneAwayStatus.2-17 30 2.5 Message Formats for the InUse Instance .2-18 31 2.5.1 Redirect.2-18 32 3GPP2 C.S0084-006-0 v3.0 CONTENTS v 2.5.2 Registration .2-19 1 2.5.3 R
28、egistrationResponse 2-20 2 2.5.4 RegistrationModeUpdate2-21 3 2.5.5 ConnectionFailureReport.2-22 4 2.5.6 ConnectionFailureReportAck .2-24 5 2.5.7 ConnectionKeepAlive .2-24 6 2.5.8 PowerDownRegistration .2-25 7 2.6 Interface to Other Protocols .2-26 8 2.6.1 Commands 2-26 9 2.6.2 Indications 2-27 10 2
29、.7 Configuration Attributes2-27 11 2.7.1 Simple Attributes.2-27 12 2.7.2 Complex Attributes2-29 13 2.7.2.1 TuneAwayScheduleN Attribute.2-29 14 2.7.2.2 RegistrationRadius 2-30 15 2.8 Protocol Numeric Constants 2-30 16 2.9 Session State Information2-30 17 3 Basic Initialization State Protocol 3-1 18 3
30、.1 Overview3-1 19 3.2 Primitives and Public Data 3-2 20 3.2.1 Commands 3-2 21 3.2.2 Return Indications.3-2 22 3.2.3 Local Common Data 3-2 23 3.2.4 Public Data3-2 24 3.3 Procedures and Messages for the InConfiguration Instance of the Protocol3-3 25 3.3.1 Protocol Initialization.3-3 26 3.3.2 Procedure
31、s 3-3 27 3.3.3 Message Formats.3-3 28 3.4 Procedures for the InUse Instance .3-3 29 3.4.1 Initialization and Commit Procedures 3-3 30 3.4.1.1 Initialization Procedures 3-3 31 3.4.1.2 Hard Commit Procedures.3-3 32 3GPP2 C.S0084-006-0 v3.0 CONTENTS vi 3.4.1.3 Soft Commit Procedures 3-3 1 3.4.2 Command
32、 Processing3-3 2 3.4.2.1 Activate .3-3 3 3.4.2.2 Deactivate .3-4 4 3.4.3 Inactive State 3-4 5 3.4.4 Network Determination State 3-4 6 3.4.5 Pilot Acquisition State .3-4 7 3.4.6 Read SystemInfo State 3-4 8 3.5 Message Formats for the InUse Instance .3-5 9 3.6 Interface to Other Protocols.3-5 10 3.6.1
33、 Commands3-5 11 3.6.2 Indications 3-5 12 3.7 Configuration Attributes .3-5 13 3.8 Protocol Numeric Constants3-5 14 3.9 Session State Information .3-6 15 4 Basic Idle State Protocol .4-1 16 4.1 Overview .4-1 17 4.2 Primitives4-2 18 4.2.1 Commands4-2 19 4.2.2 Return Indications 4-3 20 4.2.3 Local Comm
34、on Data4-3 21 4.2.4 Public Data .4-3 22 4.3 Procedures and Messages for the InConfiguration Instance of the Protocol4-3 23 4.3.1 Protocol Initialization.4-3 24 4.3.2 Procedures 4-3 25 4.3.3 Message Formats 4-3 26 4.4 Procedures for the InUse Instance.4-3 27 4.4.1 Initialization and Commit Procedures
35、4-3 28 4.4.1.1 Initialization Procedures 4-3 29 4.4.1.2 Hard Commit Procedures 4-4 30 4.4.1.3 Soft Commit Procedures 4-4 31 4.4.2 Command Processing4-4 32 3GPP2 C.S0084-006-0 v3.0 CONTENTS vii 4.4.2.1 Activate4-4 1 4.4.2.2 Deactivate4-4 2 4.4.2.3 OpenConnection 4-4 3 4.4.2.4 Close4-5 4 4.4.3 General
36、 Overview.4-5 5 4.4.3.1 General Overview of Paging4-5 6 4.4.3.2 General Overview of Sleep Cycle.4-5 7 4.4.3.3 General Overview of Delay Tolerant Paging 4-6 8 4.4.3.4 General Overview of Fast Repaging 4-6 9 4.4.4 General Procedures .4-7 10 4.4.4.1 PagePeriod Calculation 4-7 11 4.4.4.2 Paging Cycle Of
37、fset 4-7 12 4.4.4.3 QuickPageID Assignment.4-7 13 4.4.4.4 Procedure for Page Time Calculation4-7 14 4.4.4.5 Procedure for ChannelBand Selection4-8 15 4.4.5 Inactive State.4-9 16 4.4.6 Sleep State 4-9 17 4.4.6.1 Access Terminal Requirements 4-9 18 4.4.6.2 Access Network Requirements .4-10 19 4.4.7 Mo
38、nitor State.4-11 20 4.4.7.1 Access Terminal Requirements 4-11 21 4.4.7.2 Access Network Requirements .4-12 22 4.4.8 Access State 4-12 23 4.4.8.1 Access Terminal Requirements 4-12 24 4.4.8.2 Access Network Requirements .4-13 25 4.5 Message Formats for the InUse Instance .4-13 26 4.6 Interface to Othe
39、r Protocols .4-13 27 4.6.1 Commands 4-13 28 4.6.2 Indications 4-13 29 4.7 Configuration Attributes4-14 30 4.7.1 Simple Attributes.4-14 31 4.7.2 Complex Attributes4-14 32 3GPP2 C.S0084-006-0 v3.0 CONTENTS viii 4.7.2.1 PreferredPaging Attribute 4-14 1 4.7.2.2 SlottedMode Attribute4-15 2 4.7.2.3 Suppor
40、tedChannelBands Attribute4-16 3 4.8 Protocol Numeric Constants4-16 4 4.9 Session state information4-17 5 4.10 Format of the AIS Paging Information Blob4-17 6 5 Basic Connected State Protocol.5-1 7 5.1 Overview .5-1 8 5.2 Primitives5-2 9 5.2.1 Commands5-2 10 5.2.2 Return Indications 5-3 11 5.2.3 Loca
41、l Common Data5-3 12 5.2.4 Public Data .5-3 13 5.3 Procedures and Messages for the InConfiguration Instance of the Protocol5-3 14 5.3.1 Protocol Initialization.5-3 15 5.3.2 Procedures 5-3 16 5.3.3 Message Formats 5-3 17 5.4 Procedures for the InUse Instance.5-4 18 5.4.1 Initialization and Commit Proc
42、edures5-4 19 5.4.1.1 Initialization Procedures 5-4 20 5.4.1.2 Hard Commit Procedures 5-4 21 5.4.1.3 Soft Commit Procedures 5-4 22 5.4.2 Command Processing5-4 23 5.4.2.1 Activate .5-4 24 5.4.2.2 Deactivate .5-5 25 5.4.2.3 CloseConnection5-5 26 5.4.2.4 ExitSemiConnectedState .5-5 27 5.4.3 BindATI Stat
43、e5-5 28 5.4.3.1 Access Terminal Requirements 5-5 29 5.4.3.1.1 Processing the Route.ATIReceived indication .5-5 30 5.4.3.1.2 Cleanup procedures for the BindATI State .5-6 31 5.4.3.2 Access Network Requirements.5-6 32 3GPP2 C.S0084-006-0 v3.0 CONTENTS ix 5.4.4 Open State 5-6 1 5.4.4.1 Access Terminal
44、Requirements 5-6 2 5.4.4.1.1 General Requirements5-6 3 5.4.4.1.2 Cleanup Procedures.5-7 4 5.4.4.2 Access Network Requirements .5-7 5 5.4.4.2.1 General Requirements5-7 6 5.4.4.2.2 Cleanup Procedures.5-7 7 5.4.4.3 Procedures for Semi-Connected Operation.5-7 8 5.4.4.3.1.1 Access Terminal Procedures for
45、 InUse Instance Initiating 9 Transition.5-7 10 5.4.4.3.1.2 Access Terminal Procedures for InUse Instances not Initiating 11 Transition.5-9 12 5.4.4.3.1.3 Access Network Procedures5-9 13 5.4.4.4 SelectedInterlace Operation Procedures .5-9 14 5.4.4.4.1 State Transitions for Selected Interlace Operatio
46、n5-10 15 5.4.4.4.2 Procedures in Selected Interlace States5-11 16 5.4.5 Semi-Connected State .5-11 17 5.4.5.1 Access Terminal Procedures.5-11 18 5.4.5.2 Access Network Procedures5-12 19 5.4.6 Close State 5-12 20 5.5 Message Formats for the InUse Instance .5-13 21 5.5.1 ConnectionClose5-13 22 5.5.2 S
47、electedInterlaceRequest.5-15 23 5.5.3 SelectedInterlaceAssignment .5-16 24 5.5.4 SelectedInterlaceAck5-17 25 5.5.5 SemiConnectedRequest .5-18 26 5.5.6 SemiConnectedResponse.5-19 27 5.5.7 SemiConnectedEnd .5-21 28 5.6 Interface to Other Protocols .5-22 29 5.6.1 Commands 5-22 30 5.6.2 Indications 5-22
48、 31 5.7 Configuration Attributes5-22 32 3GPP2 C.S0084-006-0 v3.0 CONTENTS x 5.7.1 Simple Attributes 5-22 1 5.7.2 Complex Attributes .5-23 2 5.8 Protocol Numeric Constants5-23 3 5.9 Session State Information .5-23 4 6 Overhead Messages Protocol .6-1 5 6.1 Overview .6-1 6 6.2 Primitives6-1 7 6.2.1 Com
49、mands6-1 8 6.2.2 Return Indications 6-1 9 6.2.3 Local Common Data6-2 10 6.2.4 Public Data .6-2 11 6.3 Procedures and Messages for the InConfiguration Instance of the Protocol6-2 12 6.3.1 Protocol Initialization.6-2 13 6.3.2 Procedures 6-2 14 6.3.3 Message Formats 6-2 15 6.4 Procedures for the InUse Instance.6-3 16 6.4.1 Initialization and Commit Procedures6-3 17 6.4.1.1 Initialization Procedures 6-3 18 6.4.1.2 Hard Commit Procedures 6-3 19 6.4.1.3 Soft Commit Procedures 6-3 20 6.4.2 Extensibility Requirements6-3 21 6.4.3 Command Processing6-3 22 6.4.3.1 Activate .6-3 23 6.4.3.2 Deactivate
