1、 TIA-1121.007-1-2009 APPROVED: MAY 1, 2009 REAFFIRMED: DECEMBER 2, 2013 TIA-1121.007-1 May 2009Session Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderst
2、andings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect
3、 preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Pu
4、blications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not p
5、urport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of
6、trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. PN-3-0272.007-AD1-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Docum
7、ent will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rig
8、hts (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is reque
9、sted, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the pa
10、rties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the
11、 Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of man
12、datory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragemen
13、t of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential
14、Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES,
15、EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSL
16、Y DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMEN
17、T OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING
18、 DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELE
19、MENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0084-007-0 v3.0 CONTENTS iii FOREWORD.xi 1 NOTES . xiii 2 REFERENCES xiii 3 1 Introduction1-1 4 1.1 General Overview 1-1 5 1.2 Data Encapsulation for the InUse Protocol Instanc
20、e 1-1 6 2 Basic Session Control Protocol 2-1 7 2.1 Overview2-1 8 2.2 Primitives, Local Common Data, and Public Data2-3 9 2.2.1 Commands 2-3 10 2.2.2 Return Indications.2-3 11 2.2.3 Local Common Data 2-3 12 2.2.4 Public Data2-4 13 2.3 Protocol Data Unit.2-4 14 2.4 Procedures and Messages for the InCo
21、nfiguration Instance of the Protocol2-4 15 2.4.1 Procedures 2-4 16 2.4.1.1 Protocol Initialization for the InConfiguration Protocol Instance .2-4 17 2.4.1.2 Other Procedures.2-4 18 2.4.2 Message Formats.2-4 19 2.5 Procedures and Messages for the InUse Instance of the Protocol .2-5 20 2.5.1 Procedure
22、s 2-5 21 2.5.1.1 Generic Configuration Procedures2-5 22 2.5.1.2 Protocol Initialization for the InUse Protocol Instance.2-8 23 2.5.1.3 Hard Commit Procedures.2-8 24 2.5.1.4 Soft Commit Procedures 2-8 25 2.5.1.5 Processing the Activate Command .2-8 26 2.5.1.6 Processing the Deactivate Command2-8 27 2
23、.5.1.7 Processing the SessionClosed Indication2-9 28 2.5.1.8 Processing the SessionClose Message 2-9 29 2.5.1.9 Processing the Reconfigured Indication2-9 30 2.5.1.10 Processing the IdleInitiated indication2-9 31 3GPP2 C.S0084-007-0 v3.0 CONTENTS iv 2.5.1.11 Keep Alive Functions .2-10 1 2.5.1.12 Busy
24、 Maintenance.2-10 2 2.5.1.13 Inactive State.2-10 3 2.5.1.14 ATI Assign State 2-11 4 2.5.1.14.1 Access Terminal Requirements 2-11 5 2.5.1.14.2 Access Network Requirements .2-11 6 2.5.1.15 Open State 2-11 7 2.5.1.15.1 Access Terminal Requirements 2-11 8 2.5.1.15.2 Access Network Requirements .2-13 9 2
25、.5.1.16 AT Initiated State.2-15 10 2.5.1.16.1 Access Terminal Requirements 2-15 11 2.5.1.16.2 Access Network Requirements .2-16 12 2.5.1.17 AN Initiated State 2-17 13 2.5.1.17.1 Access Terminal Requirements 2-17 14 2.5.1.17.2 Access Network Requirements .2-18 15 2.5.1.18 AT Fast Configuration State.
26、2-19 16 2.5.1.18.1 Access Terminal Requirements 2-20 17 2.5.1.18.2 Access Network Requirements .2-20 18 2.5.1.19 AN Fast Configuration State 2-21 19 2.5.1.19.1 Access Terminal Requirements 2-21 20 2.5.1.19.2 Access Network Requirements .2-22 21 2.5.1.20 WaitingToClose State.2-23 22 2.5.2 Message For
27、mats 2-24 23 2.5.2.1 SessionClose .2-24 24 2.5.2.1.1 Definition of MoreInfo record when the CloseReason is 0x04 .2-25 25 2.5.2.2 ConfigurationRequest2-25 26 2.5.2.3 ConfigurationResponse2-27 27 2.5.2.4 ConfigurationCopyRequest 2-28 28 2.5.2.5 ConfigurationCopyAccept 2-29 29 2.5.2.6 ConfigurationCopy
28、Reject .2-29 30 2.5.2.7 AttributeReset .2-30 31 2.5.2.8 AttributeResetAccept .2-31 32 3GPP2 C.S0084-007-0 v3.0 CONTENTS v 2.5.2.9 FastConfigurationRequest2-31 1 2.5.2.10 FastConfigurationAccept2-32 2 2.5.2.11 FastConfigurationReject.2-33 3 2.5.2.12 ConfigurationComplete 2-33 4 2.5.2.13 Configuration
29、Start .2-34 5 2.5.2.14 ConfigurationReject .2-35 6 2.5.2.15 DeletePersonalityRequest.2-36 7 2.5.2.16 DeletePersonalityAccept.2-37 8 2.5.2.17 DeletePersonalityReject2-38 9 2.5.2.18 SwitchPersonality 2-39 10 2.5.2.19 SwitchPersonalityAccept 2-40 11 2.5.2.20 SwitchPersonalityReject .2-40 12 2.5.2.21 Sw
30、itchPersonalityRequest 2-41 13 2.5.2.22 SessionUpdated .2-42 14 2.5.2.23 ConfigurationStartRequest.2-42 15 2.6 Interface to Other Protocols .2-43 16 2.6.1 Commands 2-43 17 2.6.2 Indications 2-43 18 2.7 Configuration Attributes2-44 19 2.7.1 Simple Attributes.2-44 20 2.7.2 Complex Attributes2-45 21 2.
31、7.2.1 ATSupportedProtocolSetIdentifiers Attribute (access terminal 22 capability) 2-45 23 2.7.2.2 ATSupportedApplicationProtocolIDsPP Attribute (access terminal 24 capability) 2-45 25 2.7.2.2.1 Definition of SupportedProtocolParametersValues record when the 26 Application ProtocolID is ROHC (PP=0x04
32、) 2-46 27 2.7.2.2.2 Definition of SupportedProtocolParametersValues record when the 28 Application ProtocolID is EAP (PP=0x08)2-48 29 2.7.2.3 HardwareID Attribute (access terminal capability)2-48 30 2.7.3 Non-Attribute Data 2-49 31 2.7.3.1 SessionSignature .2-49 32 2.8 Protocol Numeric Constants 2-4
33、9 33 3GPP2 C.S0084-007-0 v3.0 CONTENTS vi 2.9 Session State Information .2-50 1 2 3GPP2 C.S0084-007-0 v3.0 FIGURES vii Figure 1-1. Session Control Plane Protocol.1-1 1 Figure 2-1. Basic Session Control Protocol State Diagram (Access Terminal)2-2 2 Figure 2-2. Basic Session Control Protocol State Dia
34、gram (Access Network).2-2 3 4 3GPP2 C.S0084-007-0 v3.0 FIGURES viii No text.1 3GPP2 C.S0084-007-0 v3.0 TABLES ix Table 2-1. Encoding of CloseReason Field 2-24 1 Table 2-2. RejectReason Values for access terminal .2-36 2 Table 2-3. RejectReason Values for access network2-36 3 Table 2-4. RejectReason
35、Values2-39 4 Table 2-5. RejectReason Values2-41 5 Table 2-6. Simple Configuration Attributes2-44 6 Table 2-7. HardwareIDType encoding.2-49 7 8 3GPP2 C.S0084-007-0 v3.0 TABLES x No text.1 3GPP2 C.S0084-007-0 v3.0 FOREWORD xi (This foreword is not part of this Standard) 1 This Standard was prepared by
36、 Technical Specification Group C of the Third Generation 2 Partnership Project 2 (3GPP2). This Standard is the Session Control Plane part of the Ultra 3 Mobile Broadband (UMB)1air interface. Other parts of this Standard are: 4 Overview for Ultra Mobile Broadband (UMB) Air Interface Specification 5 P
37、hysical Layer for Ultra Mobile Broadband (UMB) Air Interface Specification 6 MAC Layer for Ultra Mobile Broadband (UMB) Air Interface Specification 7 Radio Link Layer for Ultra Mobile Broadband (UMB) Air Interface Specification 8 Application Layer for Ultra Mobile Broadband (UMB) Air Interface Speci
38、fication 9 Security Functions for Ultra Mobile Broadband (UMB) Air Interface Specification 10 Connection Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification 11 Route Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification 12 Broadcast-Multicast Upper Layers
39、for Ultra Mobile Broadband (UMB) Air Interface 13 Specification 14 Other Standards may be required to implement this system and are listed in the References 15 section of each part. 16 This standard provides a specification for land mobile wireless systems based upon cellular 17 principles. This Sta
40、ndard is one part of the IMT-2000 CDMA Multi-Carrier, IMT-2000 18 CDMA MC, also known as cdma20002. 19 1Ultra Mobile Broadband and (UMB) are trade and service marks owned by the CDMA Development Group (CDG). 2cdma2000is the trademark for the technical nomenclature for certain specifications and stan
41、dards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. 3GPP2 C.S0084-007-0 v3.0 FOREWORD xii No text.1 3GPP2 C.S0084-007-0 v3.0 REFERENC
42、ES xiii The following documents contain provisions, which, through reference in this text, 1 constitute provisions of this document. References are either specific (identified by date of 2 publication, edition number, version number, etc.) or non-specific. For a specific reference, 3 subsequent revi
43、sions do not apply. For a non-specific reference, the latest version applies. 4 In the case of a reference to a 3GPP2 document, a non-specific reference implicitly refers to 5 the latest version of that document in the same Release as the present document. 6 7 1 C.S0084-000-0, Overview for Ultra Mob
44、ile Broadband (UMB) Air Interface 8 Specification. 9 2 C.S0084-001-0, Physical Layer for Ultra Mobile Broadband (UMB) Air Interface 10 Specification. 11 3 C.S0084-002-0, MAC Layer for Ultra Mobile Broadband (UMB) Air Interface 12 Specification. 13 4 C.S0084-003-0, Radio Link Layer for Ultra Mobile B
45、roadband (UMB) Air Interface 14 Specification. 15 5 C.S0084-004-0, Application Layer for Ultra Mobile Broadband (UMB) Air Interface 16 Specification. 17 6 C.S0084-005-0, Security Functions for Ultra Mobile Broadband (UMB) Air 18 Interface Specification. 19 7 C.S0084-006-0, Connection Control Plane f
46、or Ultra Mobile Broadband (UMB) Air 20 Interface Specification. 21 8 Reserved. 22 9 C.S0084-008-0, Route Control Plane for Ultra Mobile Broadband (UMB) Air 23 Interface Specification. 24 10 C.S0084-009-0, Broadcast-Multicast Upper Layer for Ultra Mobile Broadband 25 (UMB) Air Interface Specification
47、. 26 11 C.R1001, Administration of Parameter Value Assignments for cdma2000 Spread 27 Spectrum Standards. (Informative) 28 12 IETF RFC 3095, Robust Header Compression (ROHC): Framework and four 29 profiles: RTP, UDP, ESP, and uncompressed 30 13 RObust Header Compression (ROHC) Profile Identifiers 31
48、 http:/www.iana.org/assignments/rohc-pro-ids 32 3GPP2 C.S0084-007-0 v3.0 REFERENCES xiv No text.1 Introduction 3GPP2 C.S0084-007-0 v3.0 1-1 1 INTRODUCTION 1 1.1 General Overview 2 The Session Control Plane contain the protocol used to negotiate a session between the 3 access terminal and the access
49、network. 4 A session is a shared state maintained between the access terminal and the access 5 network, including information such as: 6 A unicast address (UATI) and Paging Identifier (PagingID) assigned to the access 7 terminal, 8 the set of protocols used by the access terminal and the access network to 9 communicate over the air-link, and 10 configuration settings for these protocols (e.g., authentication keys, parameters for 11 Connection Layer and MAC Layer protocols, etc.) 12 During a single session the access terminal and t
