1、 TIA-1121.009-1-2009 APPROVED: MAY 1, 2009 REAFFIRMED: DECEMBER 2, 2013 TIA-1121.009-1 May 2009Broadcast-Multicast Upper Layer for Ultra Mobile Broadband (UMB) Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating
2、misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in a
3、ny respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standa
4、rds and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard
5、does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. A
6、ny use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. PN-3-0272.009-AD1-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that
7、 the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual pr
8、operty rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereo
9、f is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left
10、 to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its conten
11、ts. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consi
12、sts of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of en
13、couragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of
14、Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WA
15、RRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TI
16、A EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN T
17、HE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
18、(INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDA
19、MENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0084-009-0 v3.0 CONTENTS iii FOREWORD.xi 1 NOTES . xiii 2 REFERENCES xiii 3 No text. .ii 4 1 Introduction1-1 5 2 BASIC Broadcast Protocol Suite 2-1 6 2.1 Overview2-1
20、7 2.1.1 Basic Protocol Numbers.2-3 8 2.1.2 Primitives, Local Common Data, and Public Data 2-3 9 2.1.2.1 Commands 2-3 10 2.1.2.2 Return Indications.2-3 11 2.1.2.3 Local Common Data.2-3 12 2.1.2.4 Public Data2-3 13 2.1.3 Messages.2-3 14 2.1.4 Basic Broadcast Protocol Suite Initialization2-4 15 2.1.4.1
21、 Protocol Initialization for the InConfiguration Protocol Instance .2-4 16 2.1.4.2 Protocol Initialization for the InUse Protocol Instance.2-4 17 2.1.5 Procedures and Messages for the InConfiguration Instance of the Basic 18 Broadcast Protocol Suite.2-4 19 2.1.6 Procedures and Messages for the InUse
22、 Instance of the Protocol2-4 20 2.1.6.1 Procedures.2-4 21 2.1.6.1.1 Command Processing.2-4 22 2.1.6.2 Message Formats .2-4 23 2.2 Broadcast Control Protocol2-4 24 2.2.1 Overview2-4 25 2.2.2 Protocol Data Unit .2-4 26 2.2.3 Procedures 2-5 27 2.2.3.1 BCMCS Flow Identifier.2-5 28 2.2.3.2 Access Network
23、 Requirements .2-5 29 2.2.3.3 Access Terminal Requirements 2-6 30 2.2.3.3.1 BroadcastParameters Message Processing2-6 31 2.2.3.3.2 BCMCS Flow Registration 2-6 32 3GPP2 C.S0084-009-0 v3.0 CONTENTS iv 2.2.3.3.2.1 BCMCS Flow Registration for Paging2-7 1 2.2.3.3.2.2 BCMCS Flow Registration for Dynamic B
24、roadcast2-8 2 2.2.3.3.2.3 Computation of Authorization Signature 2-8 3 2.2.3.4 Message Formats.2-10 4 2.2.3.4.1 BroadcastParameters Message.2-10 5 2.2.3.4.1.1 BCMCSOverheadFields 2-13 6 2.2.3.4.1.2 BCMCSPilotToDataRatioRecord .2-20 7 2.2.3.4.2 BCMCSFlowRegistration Message2-21 8 2.2.3.4.3 BroadcastR
25、eject Message.2-22 9 2.2.3.4.4 BroadcastReset Message2-24 10 2.2.3.5 Interfaces to Other Protocols .2-24 11 2.2.3.5.1 Indications.2-24 12 2.3 Broadcast Packet Consolidation Protocol.2-25 13 2.3.1 Overview .2-25 14 2.3.2 Protocol Data Unit.2-25 15 2.3.3 Procedures 2-26 16 2.3.3.1 Access Network Requi
26、rements.2-26 17 2.3.3.2 Broadcast Packet Consolidation Protocol Header Format.2-26 18 2.4 Broadcast Security Protocol 2-28 19 2.4.1.1 Access Network Requirements.2-28 20 2.4.1.1.1 Constructing the Encryption Mask 2-28 21 2.4.1.1.1.1 Generating the RandomSeed2-29 22 2.4.1.1.1.2 Constructing the Short
27、 Term Key.2-29 23 2.4.1.1.1.3 Constructing the Cryptosync2-31 24 2.4.1.1.1.4 Encryption Procedures.2-31 25 2.4.1.1.1.5 Requirements for transmission of SecurityParameters Message .2-33 26 2.4.2 Message Formats 2-33 27 2.4.2.1 SecurityParameters Message .2-33 28 2.5 Broadcast Inter-Route Tunneling Pr
28、otocol.2-34 29 2.5.1 Overview .2-34 30 2.5.2 Protocol Data Unit.2-34 31 2.5.3 Broadcast Inter-Route Tunneling Protocol Header .2-35 32 3GPP2 C.S0084-009-0 v3.0 CONTENTS v 2.5.4 Access Network Procedures .2-36 1 2.5.5 Access Terminal Procedures 2-36 2 2.6 Broadcast MAC Protocol 2-36 3 2.6.1 Overview2
29、-36 4 2.6.2 Protocol Data Unit .2-37 5 2.6.3 Procedures 2-38 6 2.6.3.1 Access Network Requirements .2-38 7 2.6.3.1.1 Broadcast Multicast Transmission Structure .2-39 8 2.6.3.1.2 BCMCS Subband Indexing.2-39 9 2.6.3.1.3 Indexing BCMCS Subbands .2-40 10 2.6.3.1.4 Logical to Physical Channel Mapping .2-
30、40 11 2.6.3.1.5 Broadcast Overhead Channel.2-41 12 2.6.3.1.6 Generation of Error Control Blocks 2-41 13 2.6.3.1.6.1 Overview 2-41 14 2.6.3.1.6.1.1 Outer Block Encoding 2-42 15 2.6.3.1.6.1.1.1 (1, 1, 0) Reed-Solomon Code .2-42 16 2.6.3.1.6.1.1.2 (16, 12, 4) Reed-Solomon Code .2-42 17 2.6.3.1.6.1.1.3
31、(16, 13, 3) Reed-Solomon Code .2-43 18 2.6.3.1.6.1.1.4 (16, 14, 2) Reed-Solomon Code .2-44 19 2.6.3.1.6.1.1.5 (32, 24, 8) Reed-Solomon Code .2-45 20 2.6.3.1.6.1.1.6 (32, 26, 6) Reed-Solomon Code .2-46 21 2.6.3.1.6.1.1.7 (32, 28, 4) Reed-Solomon Code .2-49 22 2.6.3.1.6.2 Stuffing Packets .2-51 23 2.6
32、.3.1.6.3 Multiplexer.2-51 24 2.6.3.1.6.4 Transmission Formats2-51 25 2.6.3.1.6.5 Forward Broadcast and Multicast Services Channel 26 Transmission from Multiple Sectors .2-53 27 2.6.3.1.6.5.1 Single-frequency Network (SFN) Transmission2-53 28 2.6.3.1.6.5.2 Rate Compatible Transmissions2-53 29 2.6.3.1
33、.6.6 Forward Broadcast and Multicast Services Channel Parameters 2-54 30 2.6.3.1.6.6.1 Pilot-to-Data Power Ratio (PDR) Parameters .2-55 31 2.6.3.1.6.7 MAC Index .2-57 32 3GPP2 C.S0084-009-0 v3.0 CONTENTS vi 2.6.3.2 Message Formats.2-57 1 2.6.3.2.1 BroadcastMapping Message.2-57 2 2.6.3.3 Broadcast MA
34、C NextUltraframeInfo Format.2-58 3 2.7 Interface to Other Protocols.2-59 4 2.7.1 Commands Sent2-59 5 2.7.2 Indications 2-59 6 2.8 Configuration Attributes .2-59 7 2.8.1 Simple Attributes 2-59 8 2.8.2 Complex Attributes .2-59 9 2.8.3 Non-Attribute Data2-60 10 2.8.4 Protocol Numeric Constants 2-60 11
35、2.9 Session State Information .2-60 12 2.9.1.1 RegisteredBCMCSFlows.2-60 13 14 3GPP2 C.S0084-009-0 v3.0 FIGURES vii Figure 2-1. Basic Broadcast Protocol Suite.2-2 1 Figure 2-2. Data Path in Basic Broadcast Protocol Suite 2-3 2 Figure 2-3. Broadcast Packet Consolidation Protocol Encapsulation for 2-o
36、ctet 3 header2-25 4 Figure 2-4. Generation of Short Term Key 2-30 5 Figure 2-5. Generation of Broadcast Security Packets 2-32 6 Figure 2-6. Broadcast Inter-Route Tunneling Protocol Packet.2-35 7 Figure 2-7. Error Control Block Structure 2-37 8 Figure 2-8. Format of the Broadcast MAC Packets .2-38 9
37、Figure 2-9. Format of the Last Broadcast MAC Packet that is not a Stuffing Packet .2-38 10 Figure 2-10. Indexing BCMCS Subbands .2-40 11 Figure 2-11. An Example of Variable Rate Transmission Scheme .2-54 12 13 3GPP2 C.S0084-009-0 v3.0 FIGURES viii No text.1 3GPP2 C.S0084-009-0 v3.0 TABLES ix Table 2
38、-1. Subfields of the EHMACSHA256-Message Input Working Buffer2-9 1 Table 2-2. Interpretation of BCMCSReservedInterlaces.2-11 2 Table 2-3. Interpretation of RotationalAngle .2-12 3 Table 2-4. Description of NumOuterFrames Field.2-16 4 Table 2-5. Description of OuterCode Field 2-18 5 Table 2-6. Descri
39、ption of Period Field.2-18 6 Table 2-7. Description of PilotStaggerIndex Field2-19 7 Table 2-8. Reject Reason 2-24 8 Table 2-9. PayloadType 2-28 9 Table 2-10. Subfields of the Cryptosync .2-31 10 Table 2-11. HeaderType Values 2-35 11 Table 2-12. Parity Matrix for the (16, 12, 4) Outer Code .2-43 12
40、Table 2-13. Parity Matrix for the (16, 13, 3) Outer Code .2-44 13 Table 2-14. Parity Matrix for the (16, 14, 2) Outer Code .2-45 14 Table 2-15. Parity Matrix for the (32, 24, 8) Outer Code .2-46 15 Table 2-16. Parity Matrix for the (32, 26, 6) Outer Code .2-48 16 Table 2-17. Parity Matrix for the (3
41、2, 28, 4) Outer Code .2-50 17 Table 2-18. Broadcast Overhead Channel Transmission Formats.2-52 18 Table 2-19. Broadcast Transmission Formats.2-53 19 Table 2-20. Default Pilot to Data Ratio of the Broadcast Overhead Channel .2-55 20 Table 2-21. Default Pilot to Data Ratio of the Broadcast Messages .2
42、-56 21 Table 2-22. Description of the Durationj Field, where j is the Index of the Logical 22 Channel2-58 23 Table 2-23. The Format of the Parameter Record for the RegisteredBCMCSFlows 24 Parameter.2-60 25 26 3GPP2 C.S0084-009-0 v3.0 TABLES x No text.1 3GPP2 C.S0084-009-0 v3.0 FOREWORD xi (This fore
43、word is not part of this Standard) 1 This Standard was prepared by Technical Specification Group C of the Third Generation 2 Partnership Project 2 (3GPP2). This Standard is the Broadcast-Multicast Upper Layers part 3 of the Ultra Mobile Broadband (UMB)1air interface. Other parts of this Standard are
44、: 4 Overview for Ultra Mobile Broadband (UMB) Air Interface Specification 5 Physical Layer for Ultra Mobile Broadband (UMB) Air Interface Specification 6 MAC Layer for Ultra Mobile Broadband (UMB) Air Interface Specification 7 Radio Link Layer for Ultra Mobile Broadband (UMB) Air Interface Specifica
45、tion 8 Application Layer for Ultra Mobile Broadband (UMB) Air Interface Specification 9 Security Functions for Ultra Mobile Broadband (UMB) Air Interface Specification 10 Connection Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification 11 Session Control Plane for Ultra Mobile B
46、roadband (UMB) Air Interface Specification 12 Route Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification 13 Other Standards may be required to implement this system and are listed in the References 14 section of each part. 15 This standard provides a specification for land mobi
47、le wireless systems based upon cellular 16 principles. This Standard is one part of the IMT-2000 CDMA Multi-Carrier, IMT-2000 17 CDMA MC, also known as cdma20002. 18 1Ultra Mobile Broadband and (UMB) are trade and service marks owned by the CDMA Development Group (CDG). 2cdma2000is the trademark for
48、 the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. 3GPP2 C.S0084-009-
49、0 v3.0 FOREWORD xii No text.1 3GPP2 C.S0084-009-0 v3.0 REFERENCES xiii The following documents contain provisions, which, through reference in this text, 1 constitute provisions of this document. References are either specific (identified by date of 2 publication, edition number, version number, etc.) or non-specific. For a specific reference, 3 subsequent revisions do not apply. For a non-specific reference, the latest version applies. 4 In the case of a reference to a 3GPP2 document, a non-specific reference implicitly refers to 5 the latest version of that docum
