1、 TIA-1185.100-A (Revision of TIA-1185.100) May 2015Introduction to cdma2000Extended Cell High Rate Packet Data Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purch
2、asers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of T
3、IA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accord
4、ance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems a
5、ssociated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for inf
6、ormation purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-1185.100-A, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TI
7、A or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued pa
8、tents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TI
9、A takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge
10、 whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative Re
11、ferences to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as
12、defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see
13、TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Pat
14、ent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXP
15、RESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY D
16、ISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT O
17、R PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DA
18、MAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMEN
19、T OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 2 3 4 5 6 7
20、8 9 10 11 12 13 14 15 16 17 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1. “S” bits in the Site 15 2. “S” bits i 16 3. “S” bits in the Reserved IPv6 Address Format 17 fields of the “S” bits 18 1. Assignment of the “T” Bits, the “N” Bits, and the “X” Bits for 19 20 1. Assignment of the “T” Bits, the “N” Bits,
21、 and the “X” Bits for 21 22 1. Assignment of the “T” Bits, the “N” Bits, and the “X” Bits for 23 24 25 26 27 1 1 2 3 4 5 6 1 2 1 2 3 4 5 null 6 7 null 8 9 10 11 “cdma2000is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3
22、GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States.”1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1 2 3 4 5 6 7 8 9 10 11
23、12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 “Shall” and “shall not” identify requirements to be followed strictly to conform to the 26 d. “Should” and “should not” indicate that 27 28 29 30 prohibited. “May” and “need not” indicate a cours
24、e of action permissible within the limits of 31 the standard. “Can” and “cannot” are used for statements of possibility and capability, 32 33 34 35 36 1 2 3 4 5 6 7 8 9 10 11 ore protocols that perform the layers functionality. Each of these protocols can 12 13 14 15 16 17 18 19 20 21 1 2 3 4 5 6 7
25、8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 x25 y y x26 27 28 29 30 31 1 2 3 4 5 6 7 8 9 In the following the generic term “entity” is used to 10 11 12 null 13 14 null 15 AccessChannelMAC.Abort16 17 null 18 19 20 verse Traffic Channel MAC Protocol returns a “Reverse Link Acquired” indication 21
26、 22 23 24 25 null 1 2 3 4 5 6 7 8 Protocol.Command9 Protocol.Indication AccessChannelMAC.Activate10 IdleState.ConnectionOpened11 12 Protocol Activate13 IdleState.Activate14 15 16 OpenConnection ConnectionOpened17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 1 2 3 4 5 6 7 8
27、 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 1 2 3 4 5 6 7 8 9 10 11 12 13 null Activate,14 15 null Deactivate,16 17 18 Open Close,19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 1 2 3 4 1 2 null 3 null 4 null 1 2 null 3 4 5 6 null 7 null 8 9 null 10 11 12 null 13
28、 14 null 15 null 16 17 18 null 19 null 20 21 22 null 23 24 null 25 26 null 27 null 28 29 null 30 31 32 null 33 34 null 35 36 null 37 38 null 1 2 null 3 4 null 5 null 6 7 8 null 9 10 null 11 12 null 13 14 null 15 null 16 17 null 18 19 null 20 21 22 null 23 24 25 null 26 null 27 28 29 30 31 null 32 33 34 35 36
