1、 TIA STANDARD Over-the-Air Service Provisioning for MEID-Equipped Mobile Stations in Spread Spectrum Systems TIA-158 January 2005 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance NOTICE TIA Engineering Standar
2、ds and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for thei
3、r particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude thei
4、r voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any o
5、bligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practi
6、ces and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-180, formulated under the cognizance of the TIA TR-45.5Subcommittee on Spread Spectrum Digital Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2004 Standards and Technolo
7、gy Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search onl
8、ine at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. F
9、or copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Asso
10、ciation Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this
11、 Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TI
12、As attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licen
13、sing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been comp
14、lied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES,
15、EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESS
16、LY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUME
17、NT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDIN
18、G DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL EL
19、EMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-158 i CONTENTS 1 1 INTRODUCTION. 1-1 2 2 Changes required for Enhanced Protocol Capability Messaging 2-1 3 3.3 Programming Procedure . 2-1 4 3.3.1 OTASP Data Message Processing. 2-
20、1 5 3.5.1.17 Extended Protocol Capability Response Message. 2-2 6 4.3 Programming Data Download . 2-6 7 4.3.1 OTA Data Message Processing 2-6 8 4.5.1.7 Protocol Capability Request Message 2-7 9 10 TIA-158 ii REFERENCES 1 The following standards are referenced in this text. At the time of publication
21、, the editions 2 indicated were valid. All standards are subject to revision, and parties to agreements 3 based upon this document are encouraged to investigate the possibility of applying the 4 most recent editions of the standards indicated below. ANSI and TIA maintain registers of 5 currently val
22、id national standards published by them. 6 1. TIA/EIA-95-B, Mobile Station-Base Station Compatibility Standard for Dual-Mode Spread 7 Spectrum Cellular System, March 1999. 8 2. TIA/EIA/IS-683, Over-the-Air Service Provisioning of Mobile Stations in Wideband Spread 9 Spectrum Systems, February 1997.
23、10 3. TIA/EIA/IS-683-A, Over-the-Air Service Provisioning of Mobile Stations in Spread 11 Spectrum Systems, June 1998. 12 4. TIA/EIA-683-B, Over-the-Air Service Provisioning of Mobile Stations in Spread Spectrum 13 Systems, December 2001. 14 5. TIA-683-C, Over-the-Air Service Provisioning of Mobile
24、Stations in Spread Spectrum 15 Standards, March 2003. 16 6. Reserved. 17 7. TIA-2000.5-D, “Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread 18 Spectrum Systems Release D”, March 2004. 19 8. TIA-2000.6-D, “Analog Signaling Standard for cdma2000 Spread Spectrum Systems 20 Release D”, March
25、 2004. 21 9. TIA-856-A, “cdma2000 High Rate Packet Data Air Interface Specification”, April 2004. 22 10. 3GPP2 S.R0048-A, 3G Mobile Equipment Identifier (MEID) Stage1, May 2004. 23 11. TIA-1030, Band Class Specification for cdma2000 Spread Spectrum Systems, March 24 2004. 25 26 27 28 TIA-158 1-1 1 I
26、NTRODUCTION 1 This Standard was prepared by Technical Specification Group C of the Third Generation 2 Partnership Project 2 (3GPP2).This Standard presents recommendations for supporting a 3 mobile station equipped with a Mobile Equipment IDentifier (MEID) 10 in the OTASP 4 Systems defined in 2, 3, 4
27、 and 5. 5 The OTASP feature allows a potential wireless service subscriber to activate (i.e., become 6 authorized for) new wireless service, and allows an existing wireless subscriber to make 7 changes in existing services without the intervention of a third party. 8 For the initial provisioning, th
28、e Electronic Serial Number (ESN) is used to identify the 9 mobile station. ESN is a 32-bit number assigned by the mobile station manufacturer, 10 uniquely identifying the mobile station equipment. Due to the ESN exhaustion, the MEID 11 was introduced in the cdma20001systems as the alternative to ESN
29、 for new mobile 12 stations complying with 7. 13 During the migration period from ESN to MEID, Pseudo-ESN is used by the MEID-14 equipped mobile stations. Pseudo-ESN is a 32-bit number derived from MEID and used in 15 place of ESN. For the provisioning, however, Pseudo-ESN may not be used to uniquel
30、y 16 identify a particular mobile station since Pseudo-ESN is not unique. 17 In order to solve this problem, the following new capability is introduced in this Standard. 18 Enhanced Protocol Capability Messaging - This provides the means for the base station 19 to ascertain the detailed capabilities
31、 of the mobile station, such as supported band 20 classes, operating modes, and MEID. 21 This Standard uses the same structure and section numbering as 2, 3, 4 and 5, 22 except for all the references. Sections of this Standard that remain unchanged relative to 23 2, 3, 4 and 5 are represented using
32、ellipses contained within brackets (.). Modified 24 sections are either reproduced in their entirety or use the . notation to represent 25 unchanged portions. Within modified sections, change bars indicate the specific 26 paragraphs, figures, or table cells that have changed. Within modified paragra
33、phs and 27 table cells, strike-throughs indicate deleted text and underlines indicate new text. 28 29 1cdma2000is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), c
34、dma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. TIA-158 1-2 1 No text. 2 TIA-158 2-1 2 CHANGES REQUIRED FOR ENHANCED PROTOCOL CAPABILITY MESSAGING 1 2 3.3 Programming Procedure 3 3.3.1 OTASP Data Message Processing 4 The mobile station
35、 shall discard all OTASP Data Messages received, if the programming 5 procedure is not initiated as described in 3.2 or when the mobile station is in any state, 6 substate or task other than the CDMA Conversation Substate or the analog Conversation 7 Task. If the mobile station is in the Mobile Stat
36、ion Control on the Traffic Channel State, the 8 mobile station shall send the Mobile Station Reject Order with ORDQ equal to 00000010. 9 While in the CDMA Conversation Substate or the analog Conversation Task, the mobile 10 station shall process OTASP Data Messages as follows: 11 12 7. Protocol Capa
37、bility Request Message: The mobile station shall send a Protocol 13 Capability Response Message or an Extended Protocol Capability Response Message 14 within 750 ms after receiving the message. If the Protocol Capability Request 15 Message contains the OTASP_P_REV field and the mobile station is abl
38、e to parse it, 16 then the mobile station shall send the Extended Protocol Capability Response 17 Message; otherwise, the mobile station shall send the Protocol Capability Response 18 Message. 19 20 21 TIA-158 2-23.5.1.17 Extended Protocol Capability Response Message 1 The Extended Protocol Capabili
39、ty Response Message has the following variable-length 2 format: 3 Field Length (bits) OTASP_MSG_TYPE (00010000) 8 OTASP_MOB_P_REV 8 MOB_FIRM_REV 16 MOB_MODEL 8 NUM_FEATURES 8 NUM_FEATURES occurrences of the following features: FEATURE_ID 8 FEATURE_P_REV 8 NUM_CAP_RECORDS 8 NUM_CAP_RECORDS occurrence
40、s of the following records: CAP_RECORD_TYPE 8 CAP_RECORD_LEN 8 Type-specific field 8 * RECORD_LEN 4 OTASP_MSG_TYPE - OTASP Data Message type. 5 The mobile station shall set this field to 00010000. 6 OTASP_MOB_P_REV - OTASP Mobile Protocol Revision. 7 The mobile station shall set this field to the va
41、lue shown in 8 the following table. 9 10 TIA-158 2-3 1 OTASP_MOB_P_REV (Binary) Associated Standard 00000000 2 00000001 3 00000010 4 00000011 5 00000100 Reserved2All other values are reserved. 2 MOB_FIRM_REV - Mobile station firmware revision number. 3 The mobile station shall set this field to the
42、value of the 4 MOB_FIRM_REVppermanent mobile station indicator (see 5 F.2.1 of 1, 7). 6 MOB_MODEL - Mobile station manufacturers model number. 7 The mobile station shall set this field to the value of the 8 MOB_MODELppermanent mobile station indicator (see F.2.1 9 of 1, 7). 10 NUM_FEATURES - Number
43、of Features. 11 The mobile station shall set this field to the number of 12 features supported by the mobile station using the OTASP 13 protocol. 14 FEATURE_ID - Feature Identifier. 15 The mobile station shall set this field according to Table 16 3.5.1.7-1 to indicate the feature supported by the mo
44、bile 17 station. 18 FEATURE_P_REV - Feature protocol version. 19 The mobile station shall set this field according to Table 20 3.5.1.7-1 to indicate the protocol version of the feature 21 supported by the mobile station. 22 NUM_CAP_RECORDS - Number of Capability Records. 23 The mobile station shall
45、set this field to the number of 24 Capability Records contained in the Extended Protocol 25 Capability Response Message. 26 27 2This value is reserved for designating the next revision of 5. TIA-158 2-4The mobile station shall include all the records requested in the corresponding Protocol 1 Capabil
46、ity Request Message. The mobile station shall include the following fields for each 2 capability record to be included: 3 4 CAP_RECORD_TYPE - Capability Record Type. 5 The mobile station shall set this field to the record type value 6 shown in Table 3.5.1.7.1-1 corresponding to the type of this 7 in
47、formation record. 8 CAP_RECORD_LEN - Capability Record Length. 9 The mobile station shall set this field to the number of octets 10 included in the type-specific fields of this information record. 11 If the mobile station doesnt support a requested 12 CAP_REC_TYPE or supports a requested CAP_REC_TYP
48、E, but 13 doesnt have a value, the mobile station shall include the 14 CAP_REC_TYPE with the CAP_RECORD_LEN field set to 15 00000000. 16 Type-specific field - Type-specific field. 17 The mobile station shall set these fields to the information as 18 specified in 3.5.1.7.1 for the specific type of re
49、cords. 19 20 3.5.1.17.1 Capability Information Record 21 Table 3.5.1.17.1-1 lists the information record type values that can be used in the 22 Extended Protocol Capability Response Message. The following sections describe the 23 contents of each of the record types in detail. 24 25 Table 3.5.1.17.1-1 Capability Information Record Types 26 Capability Information Record Record Type (binary) Operating Mode Information 00000000 CDMA Band Class Information 00000001 MEID 00000010 All other values are reserve
