1、 TIA-2001.5-E-2 (Addendum to TIA-2001.5-E) October 2011Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 5 (A3 and A7 Interfaces) NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between m
2、anufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any mem
3、ber or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are ad
4、opted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address
5、 all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4545.5-R
6、V5-AD2, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing pr
7、ocess. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending pa
8、tent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will
9、neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices sugg
10、ested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether desig
11、nated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO fo
12、r IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the reco
13、rds or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate produ
14、cts, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, IT
15、S MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATI
16、ON, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, IN
17、CLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EV
18、EN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Revision History Date Publication Description June 2007 A.S0015-D v1.0 For featur
19、es supported, refer to the Overview 11, section 1.1. August 2009 A.S0015-D v2.0 Updates to support 1x air interface enhancements, EVRC-WB on A2p, EVRC-NW on A2 and A2p and bug fixes. May 2011 A.S0015-D v3.0 Support for callback of an emergency call origination, EVRC-NW capacity operating point 0, an
20、d bug fixes. NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining wit
21、h minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of su
22、ch Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to
23、 any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to est
24、ablish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. PN-3-4545.5-RV5-AD2, formulated under the cognizance of the TIA TR-45 Mobile 17 Descriptions of the division of responsibility of the functions provided betwe
25、en the 18 source BS and the target BS, without prescribing specific implementations; 19 Descriptions of the BS-BS interface standard that support DS-41 and cdma20001 20 systems. 21 1.2 References 22 References are either normative or informative. A normative reference is used to include 23 another d
26、ocument as a mandatory part of a 3rd Generation Partnership Project 2 (3GPP2) 24 specification. Documents that provide additional non-essential information are included 25 in the informative references section. 26 1.2.1 Normative References 27 The following standards contain provisions which, throug
27、h reference in this text, 28 constitute provisions of this standard. At the time of publication, the editions indicated 29 were valid. All standards are subject to revision, and parties to agreements based on this 30 standard are encouraged to investigate the possibility of applying the most recent
28、editions 31 of the standards indicated below. 32 1 cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommun
29、ications Industry Association (TIA-USA) in the United States. TIA-2001.5-E-2 Section 1 2 1 3GPP2 C.S0001-E v3.0, Introduction to cdma2000 Standards for Spread 1 Spectrum Systems, June 2011. 2 2 3GPP2 C.S0002-E v3.0, Physical Layer Standard for cdma2000 Spread 3 Spectrum Systems, June 2011. 4 3 3GPP2
30、 C.S0003-E v3.0, Medium Access Control (MAC) Standard for cdma2000 5 Spread Spectrum Systems, June 2011. 6 4 3GPP2 C.S0004-E v3.0, Signaling Link Access Control (LAC) Standard for 7 cdma2000 Spread Spectrum Systems, June 2011. 8 5 3GPP2 C.S0005-E v3.0, Upper Layer (Layer 3) Signaling Standard for 9
31、cdma2000 Spread Spectrum Systems, June 2011. 10 6 3GPP2 C.S0006-D v2.0, Analog Signaling Standard for cdma2000 Spread 11 Spectrum Systems, September 2005. 12 7 Reserved. 13 8 Reserved. 14 9 3GPP2 X.S0004-550-E v4.0, Mobile Application Part (MAP) - Parameters 15 Signaling Protocols, January 2010. 16
32、10 TIA/EIA-95-B; Mobile Station - Base Station Compatibility Standard for 17 Wideband Spread Spectrum Cellular Systems, March 1999. 18 11 3GPP2 A.S0011-D v3.0, Interoperability Specification (IOS) for cdma2000 19 Access Network Interfaces Part 1 Overview, May 2011. 20 12 3GPP2 A.S0012-D v3.0, Intero
33、perability Specification (IOS) for cdma2000 21 Access Network Interfaces Part 2 Transport, May 2011. 22 13 3GPP2 A.S0013-D v3.0, Interoperability Specification (IOS) for cdma2000 23 Access Network Interfaces Part 3 Features, May 2011. 24 1417 Reserved. 25 18 3GPP2 N.S0017-B v1.0, International Imple
34、mentation of Wireless 26 Telecommunication Systems Compliant with TIA/EIA-41, December 2002. 27 19 3GPP2 C.S0010-C v2.0, Base Station Minimum Performance, February 2006. 28 29 1.2.2 Informative References 30 I-1 3GPP2 C.R1001-G v1.0, Administration of Parameter Value Assignments for 31 CDMA Spread S
35、pectrum Standards, June 2009. 32 I-2 3GPP2 S.R0005-B v2.0, Network Reference Model for cdma2000 Spread 33 Spectrum Systems, May 2007. 34 35 1.3 Terminology 36 37 1.3.1 Acronyms 38 39 Acronym Meaning 2G Second Generation 3GPP2 Third Generation Partnership Project 2 AAL2 ATM Adaptation Layer type 2 AN
36、SI American National Standards Institute ARFCN Absolute Radio Frequency Channel Number ASCII American Standard Code for Information Interchange TIA-2001.5-E-2 3 Section 1 Acronym Meaning ATM Asynchronous Transfer Mode BCD Binary Coded Decimal BS Base Station BTS Base Transceiver System CCSH Code Com
37、bining Soft Handoff CDG CDMA Development Group CDMA Code Division Multiple Access CE Channel Element CI Cell Identity CID Connection Identifier (used with reference to AAL2) CRC Cyclic Redundancy Code (or check) DCCH Dedicated Control Channel DS-41 Direct Spread (ANSI)-41 DTX Discontinuous Transmiss
38、ion EIA Electronic Industries Alliance EIB Erasure Indicator Bit ESCAM Extended Supplemental Channel Assignment Message ESN Electronic Serial Number FCH Fundamental Channel FER Frame Error Rate FPC Forward Power Control FQI Frame Quality Indicator FSN Frame Sequence Number GR Gain Ratio IE Informati
39、on Element IMSI International Mobile Subscriber Identity IMT International Mobile Telecommunications IOS Interoperability Specification IP Internet Protocol IS Interim Standard JTACS Japanese Total Access Communications LAC Location Area Code LCM Long Code Mask LSB Least Significant Bit MCC Mobile C
40、ountry Code MNC Mobile Network Code MEID Mobile Equipment Identifier MS Mobile Station MSB Most Significant Bit MSC Mobile Switching Center TIA-2001.5-E-2 Section 1 4 Acronym Meaning MSCID Mobile Station Connection Identifier MUX Multiplexer NMT Nordic Mobile Telephone OAM&P Operations, Administrati
41、on, Maintenance, and Provisioning OLT Outer Loop Threshold OTD Orthogonal Transmit Diversity PATE Packet Arrival Time Error PCS Personal Communications System PMC Packet Mode Channel PN Pilot Number PWR Power QIB Quality Indicator Bit QOF Quasi Orthogonal Function RC1 Radio Configuration 1 RC2 Radio
42、 Configuration 2 RC3 Radio Configuration 3 RF Radio Frequency RPC Reverse Power Control RSSI Received Signal Strength Indicator SCH Supplemental Channel SCTP Stream Control Transmission Protocol SDU Selection/Distribution Unit SIR Signal to Interference Ratio SLC Sector Link Count SR3 Spreading Rate
43、 3 (3X) TACS Total Access Communications TCP Transmission Control Protocol TIA Telecommunications Industry Association UDP User Datagram Protocol VCCI Virtual Channel Connection Identifier 1 1.3.2 Definitions 2 Refer to 11 for definitions. 3 1.4 Message Body, Coding, and Ordering of Elements 4 For e
44、ach A3 and A7 message there are a number of information elements that are 5 individually defined in section 4.2. Each information element in a given message is 6 tagged with a reference in section 4.2, a direction indication (i.e., some elements within a 7 message are bi-directional and others are n
45、ot), and a mandatory/optional type (M/O) 8 TIA-2001.5-E-2 5 Section 1 indicator. Information elements that are marked as optional carry an additional indication 1 of being either required (R) or conditional (C) (see below). Some information elements 2 are reused in multiple messages. 3 The DIRECTION
46、 indication associated with each message element pertains to the use of 4 that particular message element when used with the particular message (i.e., use of the 5 message element may be different in other messages). The format of the DIRECTION 6 indication is as follows: 7 Table 1.4-1 Element Flow
47、DIRECTION Indication 8 Source BS - Target BS Element flows from the Source BS to the Target BS Target BS - Source BS Element flows from the Target BS to the Source BS The inclusion of information elements in each message is specified as follows: 9 M Information elements which are mandatory for the m
48、essage. 10 O Information elements which are optional for the message. 11 R Required in the message whenever the message is sent. 12 C Conditionally required. The conditions for inclusion of this element are 13 defined in the operation(s) where the message is used (refer to 13) 14 and in footnotes as
49、sociated with the table defining the order of 15 information elements in the message. 16 Information elements which are mandatory for a given message shall be present, and 17 appear in the order shown in the message definitions in this chapter. Mandatory and 18 Optional/Required IEs differ predominantly in error processing, refer to section 1.6. 19 Information elements which are optional for a given message are included as needed for 20 specific conditions. When included, they shall appear in the order shown in the message 21 definition g
