1、 TIA-41.630-E-1E (Addendum to TIA-41.630-E) August 2012Mobile Application Part (MAP)- Basic Call Processing ANSI/TIA-41.630-E-1E-2012 APPROVED: AUGUST 2, 2012 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between man
2、ufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any membe
3、r or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adop
4、ted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address a
5、ll safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. SP-3-3590.63
6、0-RV5-AD1-E-A, formulated under the cognizance of the TIA TR-45 Mobile and Personal Communications Systems Standards, TR-45.8 Subcommittee on Core Networks- Mobile and Personal Communications Standards). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wi
7、lson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catal
8、og/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this do
9、cument, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assura
10、nce that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intelle
11、ctual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holde
12、r thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are inst
13、ead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or it
14、s contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such referen
15、ce consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs poli
16、cy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a c
17、laim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document
18、. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RI
19、GHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED
20、 TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
21、DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS
22、 A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. REVISION HISTORYRevision Date RemarksX.S0004-630-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-630-E v2.01234567891011121314151617
23、18192021222324252627282930313233343536373839404142434445464748495051525354555657585960630 -1 Registration Call TasksPART 630BASIC CALL PROCESSING1 REGISTRATION CALL TASKS1.1 Autonomous or Power-On RegistrationWhen the MSC becomes aware of the presence of an MS through registration, the Serving MSCsh
24、ould do the following:1 IF the MS is not authenticated and authentication is active:1-1 IF the MSs AuthenticationCapability indicates the MS shall be authenticated1:1-1-1 Include the SystemAccessType parameter set to Autonomous registration.1-1-2 Execute the “MSC Initiating an Authentication Request
25、” task (see Part 640, sec. 5.1).1-1-3 IF the AnalogRedirectRecord parameter is received OR IF the CDMARedirectRecord parameter is received (MS is being redirected):1-1-3-1 Send the MS the AnalogRedirectRecord or the CDMARedirectRecord, and the ServiceRedirectionInfo parameter if received.1-1-3-2 Exi
26、t this task.1-1-4 ENDIF.1-1-5 IF authentication fails:1-1-5-1 Execute “Local Recovery Procedures” task (see Part 630, sec. 5.1).1-1-5-2 Exit this task.1-1-6 ENDIF.1-2 ENDIF.2 ENDIF.3 IF the MS is not registered:3-1 Execute the “MSC Initiating MS Registration” task (see Part 640, sec. 57.1).3-2 IF th
27、e AnalogRedirectRecord parameter is received OR IF the CDMARedirectRecord parameter is received (MS is being redirected):3-2-1 Send the MS the AnalogRedirectRecord or the CDMARedirectRecord, and the ServiceRedirectionInfo parameter if received.3-2-2 Exit this task.3-3 ENDIF.3-4 IF the MS is not auth
28、orized:3-4-1 Execute “Local Recovery Procedures” task (see Part 630, sec. 5.1).3-5 ENDIF.1In addition the MSC shall initiate authentication procedures if there is no AuthenticationCapability information for the MS.X.S0004-630-E v2.0Power-Off Deregistration12345678910111213141516171819202122232425262
29、7282930313233343536373839404142434445464748495051525354555657585960630 -23-6 Send the MS the RoamingIndication parameter if received, in addition to other messages.4 ENDIF.5 IF the last received MessageWaitingNotificationType is MWI ON and the MessageWaitingNotificationCount indicates that at least
30、one message is waiting:5-1 Execute the “MSC MWN Status Change Invocation” task (see Part 651, sec. 16.9) indicating that message waiting notification is required.6 ENDIF.7 Exit this task.1.2 Power-Off DeregistrationWhen the MSC receives a power-off deregistration, the Serving MSC shall do the follow
31、ing:1 IF the MS is not authenticated and authentication is active:1-1 IF the MSs AuthenticationCapability indicates the MS shall be authenticated1:1-1-1 Include the SystemAccessType parameter set to Power down registration.1-1-2 Execute the “MSC Initiating an Authentication Request” task (see Part 6
32、40, sec. 5.1).1-1-3 IF authentication fails:1-1-3-1 Execute “Local Recovery Procedures” task (see Part 630, sec. 5.1).1-1-3-2 Exit this task.1-1-4 ENDIF.1-2 ENDIF.2 ENDIF.3 Execute the “MSC Initiating an MS Inactive” task (seePart640,sec.39.1) indicating a power down deregistration.4 Exit this task.
33、1.3 Loading of Profile ParametersUpon request, the HLR or VLR shall do the following:1 Include the AuthenticationCapability parameter set appropriately.2 Include the CallingFeaturesIndicator parameter set appropriately.3 IF carrier selection digits are applicable:3-1 IF the Profile is supported for
34、this transaction:3-1-1 Include the CarrierDigits parameter set to the carrier selection digits.3-2 ELSE:3-2-1 Include the Digits (Carrier) parameter set to the carrier selection digits.3-3 ENDIF.4 ENDIF.5 IF default account code digits are applicable for calls by the subscriber:1In addition the MSC
35、shall initiate authentication procedures if there is no AuthenticationCapability information for the MS.X.S0004-630-E v2.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960630 -3 Loading of Profile Parameters5-1 IF the Profile is supported
36、 for this transaction:5-1-1 Include the DMH_AccountCodeDigits parameter set to the appropriate default account code digits.5-2 ELSE:5-2-1 (Consider restricting originations.)5-3 ENDIF.6 ENDIF.7 IF billing digits are applicable for calls by the subscriber:7-1 IF the Profile is supported for this tran
37、saction:7-1-1 Include the DMH_BillingDigits parameter set to the appropriate alternate billing digits.7-2 ELSE:7-2-1 (Consider restricting originations.)7-3 ENDIF.8 ELSEIF alternate billing digits are applicable for calls by the subscriber:8-1 IF the Profile is supported for this transaction:8-1-1 I
38、nclude the DMH_AlternateBillingDigits parameter set to the appropriate alternate billing digits.8-2 ELSE:8-2-1 (Consider restricting originations.)8-3 ENDIF.9 ENDIF.10 IF multiple Service Types are applicable and authorized for calls by the subscriber:10-1 IF the Profile is supported for this transa
39、ction:10-1-1 IF a CDMA MS:10-1-1-1 Include the CDMAServiceOptionList parameter for Service Types authorized for the subscriber.10-1-2 ELSEIF a TDMA MS:10-1-2-1 Include the TDMADataFeaturesIndicator parameter for Service Types authorized for the subscriber.10-1-3 ELSE (Service Types are not Authorize
40、d for the subscriber):10-1-3-1 (Consider restricting originations)10-1-4 ENDIF.10-2 ENDIF.11 ENDIF.12 IF the subscribers current privileges are geographically restricted:12-1 IF the Profile is supported for this transaction:12-1-1 Include the GeographicAuthorization parameter set appropriately.12-2
41、ELSE:12-2-1 (Consider restricting originations.)12-3 ENDIF.13 ENDIF.X.S0004-630-E v2.0Loading of Profile Parameters123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960630 -414 IF the subscriber is authorized for message waiting notification:
42、14-1 IF the Profile is supported for this transaction:14-1-1 Include the MessageWaitingNotificationCount parameter set appropriately.14-1-2 Include the MessageWaitingNotificationType parameter set appropriately.14-2 ENDIF.15 ENDIF.16 If a directory number is assigned to the subscriber include the Mo
43、bileDirectoryNumber parameter set to the subscribers current directory number.17 Include the OriginationIndicator parameter set appropriately.18 IF WIN triggers can be processed by the requesting MSC (as indicated by the TransactionCapability parameter):18-1 Include the TriggerAddressList1parameter.
44、19 ENDIF.20 IF origination triggers are required:20-1 IF the Profile is supported for this transaction:20-1-1 Include the OriginationTriggers parameter set appropriately.20-2 ELSE:20-2-1 (Consider restricting originations.)20-3 ENDIF.21 ENDIF.22 IF the subscriber is authorized for PACA:22-1 IF the P
45、rofile is supported for this transaction:22-1-1 Include the PACAIndicator parameter set appropriately.22-2 ENDIF.23 ENDIF.24 IF the subscriber has a preferred language:24-1 IF the Profile is supported for this transaction:24-1-1 Include the PreferredLanguageIndicator parameter set appropriately.24-2
46、 ENDIF.25 ENDIF.26 IF restriction digits are required (as requested by the OriginationIndicator parameter):26-1 IF the Profile is supported for this transaction:26-1-1 Include the RestrictionDigits parameter set to the restriction digits.26-2 ELSE:26-2-1 Include the Digits (Destination) parameter se
47、t to the restriction digits.26-3 ENDIF.27 ENDIF.28 IF routing digits are applicable for all calls by the subscriber:1A WIN trigger shall not be set in the TriggerAddressList parameter if the MSCs WINCapability parameter indicates the WINtrigger is not supported.X.S0004-630-E v2.012345678910111213141
48、5161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960630 -5 Loading of Profile Parameters28-1 IF the Profile is supported for this transaction:28-1-1 Include the RoutingDigits parameter set to the appropriate routing digits.28-2 ELSE:28-2-1 (Consider restricting
49、 originations.)28-3 ENDIF.29 ENDIF.30 IF the MS is registered to an SMS capable system:30-1 IF the Profile is supported for this transaction:30-1-1 Include the SMS_OriginationRestrictions parameter set appropriately.30-1-2 Include the SMS_TerminationRestrictions parameter set appropriately.30-2 ELSE:30-2-1 (Consider restricting originations.)30-3 ENDIF.31 ENDIF32 IF the current transaction supports local SPINI operation AND IF local SPINI operation is desirable:32-1 Include the SPINITriggers parameter set with the appropriate triggers for local SPINI operation.32-2 Include th
