1、 TIA-455-67-A-2003 APPROVED: SEPTEMBER 1, 2003 REAFFIRMED: FEBRUARY 6, 2013 TIA-455-67-A (Revision of TIA-455-67) THIS STANDARD REPLACES TIA/EIA-455-70) September 2003FOTP- 67 IEC-60793-1-51 Optical Fibres- Part 1-51: Measurement Methods and Test Procedures- Dry Heat NOTICE TIA Engineering Standards
2、 and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their
3、particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their
4、voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obl
5、igation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practice
6、s and to determine the applicability of regulatory limitations before its use. (From Project No. 3-2819-RV1-RF1, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems, TR-42.12 Subcommittee on Optical Fibers and Cables). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIAT
7、ION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Do
8、cument may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs
9、attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensin
10、g terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complie
11、d with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendatio
12、n or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any suc
13、h Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not co
14、nstitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of complia
15、nce with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY
16、THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTEN
17、TS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT,
18、SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
19、 THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. FOREWARD With the adoption of international standard IEC 60793-1-51 (Optical Fibres Part 1-51: Measurement Methods and Test Proced
20、ures Dry Heat) TIA-455-67-A supercedes the current TIA/EIA-455-67 (FOTP-67 Procedure for Assessing High Temperature Exposure Effects on Optical Characteristics of Optical Fibers), and replaces TIA/EIA-455-70 (FOTP-70 Procedure for Assessing High Temperature Exposure Effects on Mechanical Characteris
21、tics of Optical Fibers). This action was taken under the cognizance of the TIA-FO-4.6 Subcommittee on Optical Fibers. IEC 60753-1-51 adopted as TIA-455-67-A iCONTENTS FOREWORD.ii INTRODUCTIONiv 1 Scope and object1 2 Normative references .1 3 Apparatus.2 3.1 Chamber .2 3.2 Other apparatus 2 4 Samplin
22、g and specimens 2 5 Procedure 3 5.1 Measurements.3 5.1.1 Optical measurements .3 5.1.2 Mechanical measurements .3 5.2 Preconditioning3 5.3 Conditioning 4 5.4 Recovery.4 6 Pass/fail criteria4 7 Results.4 7.1 Information to be provided with each test .4 7.2 Information to be provided upon request 5 8
23、Specification information.5 IEC 60753-1-51 adopted as TIA-455-67-A iiINTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 1-51: Measurement methods and test procedures Dry heat FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
24、comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes Intern
25、ational Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparati
26、on. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international c
27、onsensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical rep
28、orts or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergenc
29、e between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. IEC
30、60753-1-51 adopted as TIA-455-67-A iii6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60793-1-51 has
31、been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This standard, together with the other standards in the IEC 60793-1-5X series, cancels and replaces the first edition of IEC 60793-1-5, of which it constitutes a technical revision. The text of this st
32、andard is based on the following documents: FDIS Report on voting 86A/678/FDIS 86A/702/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives,
33、Part 3. IEC 60793-1-5X consists of the following parts, under the general title: Optical fibres: Part 1-50: Measurement methods and test procedures Damp heat (steady state) Part 1-51: Measurement methods and test procedures Dry heat Part 1-52: Measurement methods and test procedures Change of temper
34、ature Part 1-53: Measurement methods and test procedures Water immersion The committee has decided that the contents of this publication will remain unchanged until 2003. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. IEC 60753-1-51 adopted a
35、s TIA-455-67-A ivINTRODUCTION Publications in the IEC 60793-1 series concern measurement methods and test procedures as they apply to optical fibres. Within the same series several different areas are grouped, as follows: parts 1-10 to 1-19: General parts 1-20 to 1-29: Measurement methods and test p
36、rocedures for dimensions parts 1-30 to 1-39: Measurement methods and test procedures for mechanical characteristics parts 1-40 to 1-49: Measurement methods and test procedures for transmission and optical characteristics parts 1-50 to 1-59: Measurement methods and test procedures for environmental c
37、haracteristics. IEC 60753-1-51 adopted as TIA-455-67-A 1OPTICAL FIBRES Part 1-51: Measurement methods and test procedures Dry heat 1 Scope and object This part of IEC 60793 provides a practical method for evaluating fibre performance in a defined environment. The purpose of this standard is to deter
38、mine the suitability of optical fibre (types A1a to A1d and B1 to B4) to withstand the environmental condition of high temperature (dry heat) which may occur in actual use, storage and/or transport. The test is primarily intended to permit the observation of effects of high temperature over a given
39、period. NOTE The applicability of this test to other fibre types is under study. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 60793. For dated references, subsequent amendments to, or revi
40、sions of, any of these publications do not apply. However, parties to agreements based on this part of IEC 60793 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative
41、document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60068-2-2, Environmental testing Part 2: Tests Test B: Dry heat IEC 60793-1-32, Optical fibres Part 1-32: Measurement methods and test procedures Coating strippability IEC 60793-1-
42、40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation IEC 60793-2:1998, Optical fibres Part 2: Product specifications IEC 60753-1-51 adopted as TIA-455-67-A 23 Apparatus 3.1 Chamber The apparatus consists of an environmental chamber in accordance with IEC 60068-2-2, test
43、Bd. The chamber shall be capable of housing the specimen, without subjecting it to direct radiant heat, and of allowing access for measurement during conditioning. It shall also be capable of maintaining the specified temperature within the specified tolerances. Forced air circulation may be used to
44、 maintain homogeneous conditions. 3.2 Other apparatus Additional apparatus may be necessary to perform the examinations and measurements (or as specified in the detail specification). 4 Sampling and specimens For optical measurements, the length of the specimen shall be at least 1 000 m for fibre ty
45、pes A1a to A1d, and at least 2 000 m for fibre types B1 to B4, to allow the required measurement repeatability. The amount of the specimen outside of the test chamber shall be minimised, and if it exceeds 10 % of the overall specimen length, this should be reported. The preparation of the specimen s
46、hall have no detrimental effect on the fibre whilst under test conditions. Unless otherwise defined in the detail specification, it is recommended that the fibre sample be loosely coiled and dusted with a material such as talcum powder, to allow the coils to move freely against each other. The speci
47、men may be coiled horizontally or vertically, with a minimum bend diameter of 150 mm to avoid any macro-bending effects. If the specimen is to be sprinkled with talc, then a piece of unpowdered fibre from the specimen should be exposed to the test environment. This piece of fibre shall be of suffici
48、ent length to enable any physical examinations to be performed before and after the test. A control length of the specimen shall be removed prior to the test to enable the completion of required mechanical measurements for comparison to measurements made after the test. This control length should no
49、t be sprinkled with talc. IEC 60753-1-51 adopted as TIA-455-67-A 35 Procedure Conduct the procedure in accordance with IEC 60068-2-2, test Bd. with the temperature, humidity and exposure time, as given below: Temperature Exposure time +85 C 30 days The humidity is uncontrolled for this test, but it is recommended that it not be lower than 50 % RH at 35 C, at the start of the test. 5.1 Measurements 5.1.1 Optical measurements Attenuation measurement shall be carried out at the wavelength specified in the relevant speci
