1、g3g3TIA-4940.000-A(Revision of TIA-4940.000)g3January 2013Smart Device Communications; List of Partsg3NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeabilit
2、y and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling prod
3、ucts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Stand
4、ards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applica
5、ble regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN-4940.000-A, formulated under the cognizance of the TIA TR-50 M
6、2M-Smart Device Communications). Published by g148TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 1320 N. Courthouse RoadArlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDSAND ENGINEERING PUBLICATIONS
7、or call IHS, USA and Canada(1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/All rights reserved Printed in U.S.A. g3NOTICE OF COPYRIGHT g3This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft co
8、py (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: ht
9、tp:/www.tiaonline.org/standards/catalog/info.cfm#copyrightorTelecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed
10、 in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR
11、 consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the sc
12、ope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant
13、 or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, develop
14、ment or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search
15、 or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (i
16、ii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certif
17、y, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPR
18、OPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANC
19、E WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING
20、TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING
21、NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. PN-4940.000-A: Smart Device Commun
22、ications; List of PartsContentsiContents121g1 Introduction1g132g1 References2g142.1g1 Normative References.2g153g1 Releases of the standard.3g1678PN-4940.000-A: Smart Device Communications; List of PartsList of TablesiiList of Tables12Table 3-1 Revision A.3g13Table 3-2 Initial Release 3g1456PN-4940.
23、000-A: Smart Device Communications; List of PartsForewordiiiForeword1(This foreword is not part of this Standard.)2This document was formulated under the cognizance of the TIA Committee3TR-50, Smart Device Communications.4The contents of the present document are subject to continuing work within 5th
24、e Formulating Group and may change following formal approval. Should 6the Formulating Group approve modification, the present document will be re-7released with an identifying change of release level, for example:8TIA-4940.000-Arevision levelpart numberstandard number9Suggestions for improvement of
25、this document are welcome, and should be 10sent to:11Telecommunications Industry Association,12Standards and Technology, 132500 Wilson Boulevard, Suite 30014Arlington, VA 22201-383415Scope16This document is a member of a multi-part standard that, when taken in total, 17defines the requirements for c
26、ommunications pertaining to the access agnostic 18(e.g. PHY and MAC) monitoring and bi-directional communication of events 19and information between smart devices and other devices, applications or 20networks.21This document provides the list of parts and their revision levels that22constitute a rel
27、ease of the standard.2324Revision History25g3g5g11g7g6g9g4g12g7g10g9g1 g3g4g12g5g1g13g1 g2g10g8g8g5g9g12g11g1g11g5g2g31g36g39g36g32g30g32g32g32g1 g34g32g33g33g31g33g32g31g34g38g1 g17g20g17g25g17g12g18g1g23g15g18g15g12g24g15g1g11g5g2g31g36g39g36g32g30g32g32g32g31g2g1 g34g32g33g35g31g32g33g31g33g37g1
28、g9g15g27g17g24g17g21g20g1g2g1date approved by Formulating Group - publication date may be later.2627PN-4940.000-A: Smart Device Communications; List of PartsIntroduction11 Introduction1This document is a member of a multi-part standard that, when taken in total,2defines the requirements for communic
29、ations pertaining to the access agnostic 3(e.g., PHY and MAC) monitoring and bi-directional communication of events 4and information between smart devices, applications or networks. 5This document functions as a release control document, and provides the list 6of parts and their revision levels that
30、 constitute a release of the standard. A 7release designation of the standard corresponds to the revision level of this 8document, part 000.9The other parts in this multi-part set may be subject to their own update and 10revision process, but are not considered part of a particular release unless 11
31、specifically listed in a revision of this document.12PN-4940.000-A: Smart Device Communications; List of PartsReferences22 References122.1 Normative References3The following standards contain provisions which, through reference in this 4text, constitute provisions of this Standard. At the time of pu
32、blication, the 5editions indicated were valid. All standards are subject to revision, and parties 6to agreements based on this Standard are encouraged to investigate the 7possibility of applying the most recent editions of the standards indicated 8below. ANSI and TIA maintain registers of currently
33、valid national standards 9published by them.10References are intentionally specific (identified by date of publication, 11revision level, etc.) Consequently, only the specified revision applies.12TIA-4940.005: Smart Device Communications; 13Reference Architecture14TIA-4940.020: M2M-Smart Device Comm
34、unications; 15Protocol Aspects16TIA-4940.022: M2M-Smart Device Communications; 17Deploying and Securing Applications1819PN-4940.000-A: Smart Device Communications; List of PartsReleases of the standard33 Releases of the standard1This section maintains a historical record of the parts of the standard
35、 that 2constitute the current and previous releases.3Table 3-1 Revision A4Part designationRevisionTIA-4940.000-A M2M Smart Device Communications; List of Parts ATIA-4940.005 Smart Device Communications; Reference Architecture initial releaseg8g7g31g36g39g36g32g30g32g34g32g1 g6g34g6g1g10g19g12g23g25g
36、1g4g15g27g17g13g15g1g3g21g19g19g26g20g17g13g12g25g17g21g20g24g29g1g8g23g21g25g21g13g21g18g1g2g24g22g15g13g25g24g1 initial releaseg1g8g7g31g36g39g36g32g30g32g34g34g1 g6g34g6g1g10g19g12g23g25g1g4g15g27g17g13g15g1g3g21g19g19g26g20g17g13g12g25g17g21g20g24g29g1g4g15g22g18g21g28g17g20g16g1g12g20g14g1g10g15g13g26g23g17g20g16g1g2g22g22g18g17g13g12g25g17g21g20g24g1initial releaseg15Table 3-2 Initial Release6Part designationRevisionTIA-4940.000: Smart Device Communications; List of Parts initial releaseTIA-4940.005 Smart Device Communications; Reference Architecture initial release7g3g3g3g3g3g3
