1、 TIA-707.10-B-2E August 2014Data Service Options for Spread Spectrum Systems: Radio Link Protocol Type 3 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeabi
2、lity and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling p
3、roducts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National St
4、andards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all appl
5、icable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not const
6、itute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-707.10-B-2E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its presen
7、t or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by on
8、e or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with referenc
9、e to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms
10、 or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published
11、by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for
12、 American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American Natio
13、nal Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending paten
14、t applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED,
15、INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILI
16、TIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY
17、WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS
18、OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HERE
19、OF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. C.S0017-010-A v3.0 CONTENTS ii Revision History 1 2 Revision Description Of Changes Date Rev A v3.0 Point release to support smart blanking July 2014 3 4 C.S0017-010-A v3.0 CONTENTS iii 1 INTRODUCTION. 1-1 1 1.1 General D
20、escription 1-1 2 1.2 Terms and Numeric Variables . 1-1 3 1.3 References . 1-4 4 2 GENERAL REQUIREMENTS . 2-1 5 2.1 Required Radio Configuration Support 2-1 6 2.2 Required Multiplex Option Support . 2-1 7 2.3 Interface to Multiplex Options . 2-1 8 2.3.1 Primary Traffic 2-1 9 2.3.2 Secondary Traffic 2
21、-2 10 2.4 Traffic Channel Frame Priorities . 2-3 11 3 RLP PROCEDURES 3-1 12 3.1 RLP_BLOB Procedures 3-1 13 3.1.1 Mobile Station RLP_BLOB Procedures . 3-1 14 3.1.2 Base Station Procedures . 3-2 15 3.2 Initialization Procedures . 3-4 16 3.3 SYNC Exchange Procedures 3-4 17 3.4 RLP Reset Procedure 3-5 1
22、8 3.5 RLP Encryption Mode When P_REV_IN_USE is Less Than Nine 3-5 19 3.5.1 Extended Data Frame Sequence Numbering 3-5 20 3.5.2 RLP Data Encryption Negotiation 3-6 21 3.5.2.1 ORYX Encryption Algorithm 3-6 22 3.6 RLP Encryption Mode When P_REV_IN_USE is Greater Than or Equal to Nine . 3-7 23 3.6.1 Ext
23、ended Data Frame Sequence Numbering 3-7 24 3.6.2 RLP Data Encryption Negotiation 3-7 25 3.6.2.1 AES Encryption Algorithm For RLP Data Encryption 3-7 26 3.7 Data Transfer . 3-8 27 3.7.1 Transmitting RLP Frames . 3-8 28 3.7.1.1 Segmentation of Data Frames 3-10 29 3.7.1.2 Idle Timer Operation . 3-11 30
24、 3.7.1.3 Encryption 3-11 31 C.S0017-010-A v3.0 CONTENTS iv 3.7.1.3.1 Encryption Using the ORYX Encryption Algorithm 3-11 1 3.7.1.3.2 Encryption Using the AES Encryption Algorithm 3-12 2 3.7.2 Receiving RLP Frames . 3-13 3 3.7.2.1 Data Frame Processing 3-14 4 3.7.2.1.1 Unsegmented Data Frame Processi
25、ng . 3-15 5 3.7.2.1.2 Segmented Data Frame Processing . 3-16 6 3.7.2.2 Idle Frame Processing . 3-17 7 3.7.2.3 Fill Frame Processing 3-18 8 3.7.2.4 NAK Control Frame Processing 3-18 9 3.7.2.5 NAK List Processing 3-18 10 3.7.2.6 Decryption 3-20 11 3.7.2.6.1 Decryption Using ORYX Encryption Algorithm 3
26、-20 12 3.7.2.6.2 Decryption Using AES Encryption Algorithm 3-20 13 3.7.3 Frame Validity Checks 3-21 14 4 RLP FRAME FORMATS 4-1 15 4.1 Rate 1 RLP Frame Format A . 4-1 16 4.1.1 Format A for Primary Traffic 4-1 17 4.1.2 Format A for Secondary Traffic 4-2 18 4.2 Control Frames 4-3 19 4.2.1 SYNC, SYNC/AC
27、K, and ACK Control Frames . 4-3 20 4.2.2 NAK Control Frame . 4-4 21 4.3 Data Frames 4-6 22 4.3.1 Unsegmented Data Frames . 4-6 23 4.3.1.1 Unsegmented Data Frame Format . 4-6 24 4.3.1.2 Unsegmented Data Frame using Segmented Data Frame Format 4-7 25 4.3.2 Segmented Data Frames . 4-8 26 4.3.3 Rate 1 D
28、ata Frame Format B 4-9 27 4.3.3.1 Format B for Primary Traffic 4-9 28 4.3.3.2 Format B for Secondary Traffic 4-10 29 4.3.4 Data Frame Format C . 4-11 30 4.3.5 Data Frame Format D . 4-11 31 4.4 Fill Frames . 4-13 32 C.S0017-010-A v3.0 CONTENTS v 4.5 Idle Frames 4-13 1 4.5.1 Idle Frame Format 1 . 4-14
29、 2 4.5.2 Idle Frame Format 2 . 4-14 3 4.6 RLP BLOB 4-15 4 5 FIGURES 6 Figure 1 RLP Transmit Sequence Number 3-8 7 Figure 2 RLP Segmentation 3-9 8 Figure 3 RLP Receive Sequence Number Variables 3-13 9 10 TABLES 11 Table 1 Primary Traffic RLP Frame Types Supplied by RLP to the Multiplex Sublayer for 1
30、2 multiplex options 0x1, 0x2, 0x3, 0x4, 0x809, 0x80a, 0x811, 0x812, 0x821, 0x822, 13 0x905, 0x906, 0x909, 0x90a, 0x911, 0x912, 0x921, 0x922, 0xf00 2-2 14 Table 2 Primary and Secondary Traffic RLP Frame Types Supplied by RLP to the 15 Multiplex Sublayer for multiplex options 0x704 , 0xf00, and 0xf20
31、. 2-2 16 Table 3 Secondary Traffic RLP Frame Types Supplied by RLP to the Multiplex Sublayer 17 for multiplex options 0x1, 0x2, 0x3, 0x4, 0x809, 0x80a, 0x811, 0x812, 0x821, 18 0x822, 0x905, 0x906, 0x909, 0x90a, 0x911, 0x912, 0x921, 0x922, 0xf00 . 2-3 19 Table 4 Fundicated RLP Frame Categories 2-5 20
32、 Table 5 Multiplex Option Usage of RLP Frame Formats . 4-1 21 Table 6 Values of the Maximum Allowable Data Length (MAX_LEN) for Multiplex Options 22 0x1, 0x2, 0x3, and 0x4 4-7 23 24 C.S0017-010-A v3.0 vi This page intentionally left blank. 1 C.S0017-010-A v3.0 1-1 1 INTRODUCTION 1 1.1 General Descri
33、ption 2 This document specifies procedures for Radio Link Protocol Type 3. Radio Link Protocol 3 Type 3 is used with a cdma20001 Traffic Channel to support CDMA data services. For the 4 remainder of this chapter, Radio Link Protocol Type 3 shall be called RLP. 5 RLP provides an octet stream transpor
34、t service over forward and reverse traffic channels. 6 RLP is unaware of higher layer framing; it operates on a featureless octet stream, delivering 7 the octets in the order received. 8 RLP has procedures to substantially reduce the error rate exhibited by CDMA traffic 9 channels. There is no direc
35、t relationship between higher layer packets and the underlying 10 traffic channel frames; a large packet may span multiple traffic channel frames, or a single 11 traffic channel frame may contain all or part of several small higher layer packets. 12 Section 2 is a general description of RLP that def
36、ines its use by any service option for which 13 it is suited. Section 3 defines the RLP procedures for encrypted or non-encrypted 14 applications. Section 4 defines the RLP frame formats. 15 Some features require capabilities first available in cdma2000 Release A. Systems 16 supporting only cdma2000
37、 Release 0 do not support the following: 17 Radio Configurations greater than 5. 18 Multiplex options 0x704 and 0xf20. 19 Variable Length Frame Mode (VLF). 20 Some features are included for support of capabilities first available in cdma2000 Release 21 C. Systems supporting cdma2000 Release 0 or cdm
38、a2000 Release A or cdma2000 Release B 22 but not cdma2000 Release C do not support the following: 23 Multiplex option 0xf00. 24 1.2 Terms and Numeric Variables 25 Base Station (BS). A fixed station used for communicating with mobile stations. 26 Depending upon the context the term Base Station may r
39、efer to a cell, a sector within a cell, 27 or other part of the wireless system. 28 Blank RLP Frame. An RLP frame received from or supplied to the multiplex sublayer that 29 contains no bits. 30 BS. See base station. 31 1 “cdma2000 is the trademark for the technical nomenclature for certain specific
40、ations and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States.” C.S0017-010-A v3.0 1-2 BS/MSC. The base station and mobile switch
41、ing center considered as a single functional 1 entity. 2 Data Block. A unit of data transmitted by the mobile/base station that carries one or more 3 RLP frames. 4 Dedicated Control Channel. A portion of a Traffic Channel which includes a Forward 5 Dedicated Control Channel, a Reverse Dedicated Cont
42、rol Channel, or both. 6 DELAY_DETECTION_WINDOWs. An estimate of the delay frame detection window size to 7 be used by the mobile station (see 4.6). 8 Forward Dedicated Control Channel. A portion of a Forward Traffic Channel. 9 Forward Fundamental Channel. A portion of a Forward Traffic Channel. 10 F
43、orward Packet Data Channel (F-PDCH). A portion of a Forward Traffic Channel that 11 provides higher data rate services. 12 Forward Supplemental Channel. A portion of a Forward Traffic Channel which operates 13 in conjunction with a Forward Fundamental Channel or Forward Dedicated Control 14 Channel
44、in that Forward Traffic Channel to provide higher data rate services. 15 Forward Traffic Channel. One or more Forward CDMA channels used to transport user 16 and signaling traffic from the base station to the mobile station. See Forward Fundamental 17 Channel, Forward Dedicated Control Channel, Forw
45、ard Supplemental Channel, and 18 Forward Packet Data Channel. 19 F-PDCH. See Forward Packet Data Channel. 20 F-PDCH Data Block. A data block carried on a Forward Packet Data Channel. 21 F-PDCH RLP Frame. An RLP frame carried in an F-PDCH data block. 22 Fundamental Channel. A portion of a Traffic Cha
46、nnel which includes a Forward 23 Fundamental Channel, a Reverse Fundamental Channel, or both. 24 Fundicated Data Block. A data block carried on a Fundamental Channel or a Dedicated 25 Control Channel. 26 Fundicated RLP Frame. An RLP frame carried in a fundicated data block. 27 L_SEQ. The 12-bit sequ
47、ence number of the received frame. 28 L_V(N). The 12-bit sequence number of the next data frame needed for sequential delivery. 29 L_V(N)peer. An estimate of the peer RLPs L_V(N). 30 L_V(R). The 12-bit sequence number of the next expected new data frame. 31 L_V(S). The 12-bit sequence number of the
48、next data frame to be supplied to the multiplex 32 sublayer. 33 Mobile Station (MS). A station in the Public Cellular Radio Telecommunications Service 34 intended to be used while in motion or during halts at unspecified points. Mobile stations 35 include portable units (e.g., hand-held personal uni
49、ts) and units installed in vehicles. 36 MS. See Mobile Station. 37 C.S0017-010-A v3.0 1-3 MSC. Mobile Switching Center. 1 NAK_COUNTi. The number of NAKs to send in the ith NAK round. 2 NAK List. A list maintained by RLP to track missing data frames and segments of data 3 frames. It is also used to map an 8-bit sequence number (SEQ) contained in a 4 retransmitted data frame to the 12-bit sequence number (L_SEQ) of the missing data frame. 5 NAK round. An interval that begins when RLP supplies the last of one or more NAK control 6 frames for a missing data frame described b
