1、 TIA-707.12-B September 2009 Data Service Option For Spread Spectrum Systems - Section 12 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improv
2、ement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not con
3、forming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institu
4、te (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulato
5、ry requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4617.12-UGRV2, formulated under the cognizance of the TIA TR-45.5 Su
6、bcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING
7、 PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of
8、 these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to req
9、uest permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document ma
10、y be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search o
11、r investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to in
12、vestigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-dis
13、criminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or other
14、wise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICU
15、LAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE ST
16、ATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTEN
17、TS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIA
18、BILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-707.12-B CONTENTS i 1 INTRODUCTION 1-1 1 1.1 General D
19、escription . 1-1 2 1.2 Terms 1-1 3 1.3 References . 1-4 4 1.4 Overview of Packet Data Service. 1-5 5 1.4.1 Protocol Options. 1-5 6 1.4.1.1 Relay Layer RmInterface Protocol Option . 1-5 7 1.4.1.2 Network Layer RmInterface Protocol Option. 1-6 8 1.4.2 Packet Data Protocol States 1-7 9 1.4.2.1 PDSN Lin
20、k Layer Connection States . 1-7 10 1.4.2.2 Mobile Station Packet Data Service States 1-8 11 1.4.2.3 BS Packet Data Service States 1-9 12 2 RELAY LAYER . 2-1 13 2.1 Introduction. 2-1 14 2.2 UmInterface Requirements 2-1 15 2.2.1 RLP Requirements 2-1 16 2.2.2 Service and Call Control Procedures. 2-1 17
21、 2.2.2.1 Mobile Station Procedures 2-1 18 2.2.2.1.1 Packet Data Service Control Procedures 2-1 19 2.2.2.1.1.1 Inactive State 2-1 20 2.2.2.1.1.2 Active State . 2-1 21 2.2.2.1.2 Packet Data Service Call Control Function 2-2 22 2.2.2.1.2.1 Null State 2-2 23 2.2.2.1.2.2 Initialization State . 2-3 24 2.2
22、.2.1.2.3 Connected State 2-3 25 2.2.2.1.2.4 Dormant State. 2-4 26 2.2.2.1.2.5 Reconnect State 2-6 27 2.2.2.2 BS/PCF Procedures 2-6 28 2.2.2.2.1 Packet Data Service Call Control Function 2-6 29 2.2.2.2.1.1 Null State 2-7 30 2.2.2.2.1.1.1 PCF Initiated Service Option Connection 2-7 31 TIA-707.12-B ii
23、2.2.2.2.1.1.2 Mobile Station Originated Service Option Connection 2-7 1 2.2.2.2.1.2 Paging State 2-8 2 2.2.2.2.1.3 Initialization State . 2-9 3 2.2.2.2.1.4 Connected State 2-9 4 2.2.3 Initialization and Connection of Packet Data Service Options . 2-10 5 2.2.3.1 Mobile Station Procedures 2-11 6 2.2.3
24、.2 BS Procedures 2-13 7 2.2.4 Packet Data Dormant Timer Control. 2-13 8 2.2.5 Packet Zone Reconnection Control . 2-15 9 2.2.5.1 SID/NID Hysteresis 2-21 10 2.2.6 Strongest Pilot Monitoring and Reporting 2-212-22 11 2.2.7 High Speed Operation 2-23 12 2.2.7.1 Mobile Station Procedures for Reverse High
25、Speed Operation Using a 13 Supplemental Channel . 2-24 14 2.2.7.2 Reverse High Speed Operation Messages When Using a Supplemental 15 Channel . 2-25 16 2.2.7.2.1 SCRM_REQ_BLOB Format 2-25 17 2.2.7.2.2 SCRMM_REQ_BLOB Format . 2-26 18 2.2.8 Quality of Service (QoS) 2-28 19 2.2.8.1 QoS Parameters 2-28 2
26、0 2.2.8.2 Mobile Station Procedures When Using QoS BLOB Type 0 2-33 21 2.2.8.3 Base Station Procedures When Using QoS BLOB Type 0. 2-43 22 2.2.9 Short Data Burst 2-47 23 2.2.9.1 Short Data Burst Procedures 2-47 24 2.2.9.2 Data Burst Message Format . 2-48 25 2.2.9.3 Short Data Burst Format 2-48 26 3
27、LINK LAYER 3-1 27 3.1 RmInterface Link Layer. 3-1 28 3.1.1 Link Layer Connection Open 3-1 29 3.1.2 Link Layer Connection Closure. 3-1 30 3.2 PDSN Link Layer 3-1 31 3.2.1 Link Layer Connection Open 3-2 32 3.2.2 Link Layer Connection Closure. 3-2 33 TIA-707.12-B CONTENTS iii 4 NETWORK LAYER . 4-1 1 4.
28、1 Internet Protocol Support for the PDSN Link Layer. 4-1 2 3 TIA-707.12-B iv FIGURES 1 Figure 1 Relay Layer RmInterface Protocol Option . 1-6 2 Figure 2 Network Layer RmInterface Protocol Option. 1-7 3 Figure 3 Packet Data Service Call Control States in the Mobile Station. 1-9 4 Figure 4 Packet Data
29、 Service Call Control States in the BS. 1-10 5 TABLES 6 Table 1 Valid Service Configuration Attributes for Service Option 33 and Service Option 7 66. 2-12 8 Table 2 Type-Specific Fields for Data Dormant Timer Control 2-13 9 Table 3 Dormant Timer Control Field 2-15 10 Table 4 Minimum Value of Mobile
30、Station Dormant Timer. 2-15 11 Table 5 Type-Specific Fields for Packet Connection Control . 2-18 12 Table 6 Packet Zone Connection Control Field. 2-19 13 Table 7 Type-Specific Fields for Packet Zone Connection Response 2-20 14 Table 8 Type-Specific Fields for Strongest Pilot Monitoring and Reporting
31、 . 2-22 15 Table 9 Encoding of the PREFERRED_RATE 2-26 16 Table 10 Encoding of the DURATION Field 2-27 17 Table 11 Encoding of the RES_DATA Field. 2-27 18 Table 12 QoS Parameters Applicable to Service Option 33 and Service Option 66 for 19 QoS BLOB Type 0 . 2-28 20 Table 13 Mobile Station QoS BLOB 2
32、-33 21 Table 14 QoS BLOB Type Included Indicator Values 2-35 22 Table 15 User Priority Adjustment Values . 2-36 23 Table 16 Minimum User Data Rate Indicator Values . 2-38 24 Table 17 Minimum User Data Rate Values 2-38 25 Table 18 Minimum Data Loss Indicator Values 2-39 26 Table 19 Data Loss Rate Val
33、ues 2-39 27 Table 20 Maximum Delay Indicator Values 2-40 28 Table 21 Maximum Delay Values. 2-41 29 Table 22 Base Station QoS BLOB When Using QoS BLOB Type 0. 2-43 30 31 TIA-707.12-B 1-1 1 INTRODUCTION 1 1.1 General Description 2 This chapter defines requirements for support of high speed packet data
34、 transmission 3 capability on cdma20001spread spectrum systems. Packet data transmission is 4 supported on cdma2000 Traffic Channels using primary or secondary traffic. For packet 5 data transmission on traffic channels using Service Option 33 or Service Option 66, the 6 Radio Link Protocol Type 3 s
35、pecified in C.S0017-0-2.10 is used. 7 This standard specifies a packet data bearer service for communication between terminal 8 equipment and a packet data serving node (PDSN) via a base station/packet control 9 function (BS/PCF). 10 Packet data service options provide a means of establishing and ma
36、intaining Traffic 11 Channels for packet data service. Service Option 33 and Service Option 66 are used to 12 request packet data service through a PDSN supporting an Internet standard Point-to-Point 13 Protocol (PPP) interface to network layer protocols (see 4.1). Additional packet data service 14
37、options may be defined in future revisions to select other types of PDSN resources or 15 services. 16 1.2 Terms 17 Auxiliary Service Instance. A packet data service instance that is not used to perform 18 PPP negotiation (see 19). An auxiliary service instance uses service option number 66. 19 Base
38、Station (BS). A fixed station used for communicating with mobile stations. 20 Depending upon the context, the term base station may refer to a cell, a sector within a 21 cell, or other part of the wireless system. 22 BS. See base station. 23 BS/PCF. The base station and packet control function consi
39、dered as a single functional 24 entity. 25 CCPD. See Common Channel Packet Data. 26 Common Channel Packet Data. A mode of operation in which the MS and BS only use 27 Short Data Bursts transmitted on common channels to exchange packet data. This mode 28 can be used only while the mobile stations pac
40、ket data service call control function is in 29 the Dormant State. A mobile station will request a direct-to-dormant transition if it intends 30 to use Common Channel Packet Data. 31 Data Circuit Terminating Equipment (DCE). A DCE connects a DTE to the network. A 32 typical DCE would be a V-series m
41、odem. 33 1cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) i
42、n the United States. TIA-707.12-B 1-2 Direct-to-Dormant. A mechanism to permit the packet data service call control function 1 to transition from the Initialization State or Reconnect State to the Dormant State without 2 passing through the Connected State. The mobile station requests direct-to-dorm
43、ant 3 during a connection attempt (see 2.2.3) 4 DTE. Data Terminal Equipment. 5 ESCAM. Extended Supplemental Channel Assignment Message (see 16). 6 Extended Packet Data Services Zone Identifier. One of two formats used to identify a 7 packet zone when SID/NID hysteresis is supported (see 2.2.5.1). 8
44、 Forward Dedicated Control Channel. A portion of a Forward Traffic Channel. 9 Forward Fundamental Channel. A portion of a Forward Traffic Channel. 10 Forward Packet Data Channel. A portion of a Forward Traffic Channel that may operate 11 in conjunction with a Forward Fundamental Channel or Forward D
45、edicated Control 12 Channel in that Forward Traffic Channel to provide high data rate services. 13 Forward Supplemental Channel. A portion of a Forward Traffic Channel which operates 14 in conjunction with a Forward Fundamental Channel or Forward Dedicated Control 15 Channel in that Forward Traffic
46、Channel to provide higher data rate services than using 16 only a Forward Fundamental Channel or Forward Dedicated Control Channel. 17 FSCAMM. Forward Supplemental Channel Assignment Mini Message (see 16). 18 Forward Traffic Channel. One or more Forward CDMA channels used to transport user 19 and si
47、gnaling traffic from the base station to the mobile station. See Forward Fundamental 20 Channel, Forward Dedicated Control Channel, and Forward Supplemental Channel. 21 IP. Internet Protocol. 22 IPCP. Internet Protocol Control Protocol (see 5). 23 LCP. PPP Link Control Protocol (see 7). 24 Main Serv
48、ice Instance. The single packet data service instance used to perform PPP 25 negotiation (see 19). The main service instance is established before any auxiliary service 26 instance can be established. The main service instance uses service option number 33. 27 Mobile IP. Mobile Internet Protocol (se
49、e 10). 28 Mobile Station. A station in the Public Cellular Radio Telecommunications Service 29 intended to be used while in motion or during halts at unspecified points. Mobile stations 30 include portable units (e.g., hand-held personal units) and units installed in vehicles. 31 MSC. Mobile Switching Center. 32 MT0. Mobile Termination 0 (see 1.4.1). 33 MT2. Mobile Termination 2 (see 1.4.1). 34 NID. Network Identification (see 16). 35 Packet Data Services Zone Identifier. The base station assigned number (see 16) that, 36 when non-zero, identifies the packet data
