TIA-751-2002 TIA EIA-41-D Modifications to Support IMSI《TIA EIA-41-D 支持IMSI的修正》.pdf

上传人:eventdump275 文档编号:1060828 上传时间:2019-03-31 格式:PDF 页数:74 大小:451.49KB
下载 相关 举报
TIA-751-2002 TIA EIA-41-D Modifications to Support IMSI《TIA EIA-41-D 支持IMSI的修正》.pdf_第1页
第1页 / 共74页
TIA-751-2002 TIA EIA-41-D Modifications to Support IMSI《TIA EIA-41-D 支持IMSI的修正》.pdf_第2页
第2页 / 共74页
TIA-751-2002 TIA EIA-41-D Modifications to Support IMSI《TIA EIA-41-D 支持IMSI的修正》.pdf_第3页
第3页 / 共74页
TIA-751-2002 TIA EIA-41-D Modifications to Support IMSI《TIA EIA-41-D 支持IMSI的修正》.pdf_第4页
第4页 / 共74页
TIA-751-2002 TIA EIA-41-D Modifications to Support IMSI《TIA EIA-41-D 支持IMSI的修正》.pdf_第5页
第5页 / 共74页
点击查看更多>>
资源描述

1、 TIA STANDARD TIA-751 TIA/EIA-41-D Modifications to Support IMSI TIA-751 JANUARY 2002 (REAFFIRMED FEBRUARY 2007)TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of NOTICE TIA/EIA Engineering Standards and Publications are design

2、ed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of

3、such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than T

4、IA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, n

5、or does it assume any obligation whatever to parties adopting the Standard or Publication. TIA STANDARDS TIA Standards contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public

6、review and resolution of comments which is a procedural part of the development of a TIA/EIA Standard. TIA Standards should be reviewed on an annual basis by the formulating Committee and a decision made on whether to proceed to develop a TIA/EIA Standard on this subject. TIA Standards must be cance

7、lled by the Committee and removed from the TIA/EIA Standards Catalog before the end of their third year of existence. Publication of this TIA Standard for trial use and comment has been approved by the Telecommunications Industry Association. Distribution of this TIA Standard for comment shall not c

8、ontinue beyond 60 months from the date of publication. It is expected that following this 36 month period, this TIA Standard, revised as necessary, will be submitted to the American National Standards Institute for approval as an American National Standard. Suggestions for revision should be directe

9、d to: Standards Served MS MIN“ by “MSID; Served MS MSID“4.1.2figure, step(s) a, b, c: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.1.3figure, step(s) a, b, c: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; S

10、erved MS MSID“4.1.4figure, step(s) a: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.1.5figure, step(s) a, b, c: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.1.6figure, step(s) a, b: replace

11、 “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.2 AuthenticationDirectiveForward 174.2.1figure, step(s)s a and b: add “IMSI,“ after “MIN,“narrative, step(s) a: replace:“MIN; MS MIN“by“MIN; MS MIN. Include if available.IMSI, MS IMSI. Include if available.

12、4.3 AuthenticationFailureReport 194.3.1figure: no changenarrative, step(s) a: replace “MIN; MS MIN“ by “MSID; MS MSID“4.4 AuthenticationRequest 214.4.1figure: no changenarrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“narrative, step(s) d, e, f: no changenote: no need to a

13、dd the parameter MIN since the SSD is not shared.4.4.3figure: no changeTIA-751123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960- 10 -narrative, step(s) d, e, f: no changenote: no need to add the parameter MIN since the SSD is not shared.4

14、4.5figure,: no changenarrative, step(s) a: replace “MIN; MS MIN“ by “MSID; MS MSID“narrative, step(s) d: no changenote: no need to add the parameter MIN since the SSD is not shared.4.5 AuthenticationStatusReport 364.5.1figure, step(s) a, b, c: replace “MIN“ by “MSID“narrative, step(s) a: replace “M

15、IN; Served MS MIN“ by “MSID; Served MS MSID“figure, steps d,e: add “MIN“ before ReportParameterGroupnarrative, steps d,e: before “ReportParameterGroup“, add “MIN; If the VLR is being given responsibility forauthentication calculations; Optional“4.5.2figure, step(s) a: replace “MIN“ by “MSID“narrativ

16、e, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.6 BaseStationChallenge 414.6.1figure, step(s) a, b, c: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.6.2figure, step(s) a: replace “MIN“ by “MSID“narrative: no change.4.8 Coun

17、tRequest 464.8.1figure, step(s) a, b: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.9 FeatureRequest 484.9.1figure, step(s) a: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.9.2figure, step(s

18、) a: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.10 FlashRequest 534.10.1figure, step(s)s a and b: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.11 InformationDirective 554.11.1figure, ste

19、p(s)s a and b: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“TIA-751123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960 - 11 -4.12 InformationForward 574.12.1figure, step(s)s a and b: add

20、 “IMSI,“ after “MIN,“narrative, step(s) a: replace “MIN; Served MS MIN“ by:“MIN; Served MS MIN (include if available).IMSI; Served MS IMSI (include if available)“4.13 InterSystemAnswer 594.13.1figure, step(s) a: add “, IMSI“ after “MIN“narrative, step(s) a: for MIN parameter, replace type “R“ by “O“

21、 To usage add “Include if available.“Add parameter IMSI (Usage: “Served MS IMSI. Include if available“, Type O).4.14 InterSystemPage 604.14.1figure: no changenarrative, step(s) a: replace “MIN; Served MS MIN“ by “MIN, IMSI; Served MS MIN and IMSI (include allknown)“4.15 InterSystemPage2 654.15.1fig

22、ure: no changenarrative, step(s) a: replace “MIN; Served MS MIN“ by “MIN, IMSI; Served MS MIN and IMSI (include allknown)“4.16 InterSystemSetup 704.16.1figure, step(s) a: add “IMSI“ after “MIN“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MIN, IMSI; Served MS MIN and IMSI (include allknown)

23、 O“4.16.2figure, step(s) a: add “IMSI“ after “MIN“narrative: no change4.17 LocationRequest 734.17.1figure, step(s) b: add “IMSI,“ after “MIN,“narrative, step(s) b: after “MIN; Served MS MIN“, add “IMSI; Called MS IMSI (include if available); O“4.17.2figure, step(s) b: add “IMSI,“ after “MIN,“narrat

24、ive: no change4.17.3figure, step(s) b: add “IMSI,“ after “MIN,“narrative: no change4.17.4figure, step(s) b: add “IMSI,“ after “MIN,“narrative: no change4.17.5figure, step(s) b: add “IMSI,“ after “MIN,“TIA-75112345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505

25、1525354555657585960- 12 -narrative: no change4.17.6figure, step(s) b: add “IMSI,“ after “MIN,“narrative, step(s) b: after “MIN; Called MS MIN“, add “IMSI; Called MS IMSI (include if available); O“4.18 MSInactive 824.18.1figure, step(s) a and c: replace “MIN“ by “MSID“narrative, step(s) a: replace “M

26、IN; Served MS MIN“ by “MSID; Served MS MSID“4.18.2figure, step(s) a, c and e: replace “MIN“ by “MSID“narrative, step(s) a and e: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.19 OriginationRequest 864.19.1figure, step(s) a: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served

27、MS MIN“ by “MSID; Served MS MSID“4.19.2figure, step(s) a: replace “MIN“ by “MSID“narrative: no change4.20 QualificationDirective 894.20.1figure, step(s) a and c: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID (last identifier used forregistration a

28、t Serving System).“4.20.2figure, step(s) a and c: replace “MIN“ by “MSID“narrative: no change4.20.3figure, step(s) a and c: replace “MIN“ by “MSID“narrative: no change4.20.4figure, step(s) a and c: replace “MIN“ by “MSID“narrative, step(s) a and c: replace “MIN; Served MS MIN“ by “MSID; Served MS MS

29、ID“4.21 QualificationRequest 974.21.1figure, step(s) a and b: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.21.2figure, step(s) a and b: replace “MIN“ by “MSID“4.21.3figure, step(s) a and b: replace “MIN“ by “MSID“4.23 RedirectionDirective 1064.

30、23.1figure, step(s) a: add “IMSI“ after “MIN“TIA-751123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960 - 13 -narrative, step(s) a: replace “MIN; Served MS MIN“ by “MIN, IMSI; Served MS MIN and IMSI (include allknown)“4.23.2figure, step(s)

31、a: add “IMSI“ after “MIN“narrative: no change4.24 RedirectionRequest 1094.24.1figure, step(s) a: add “IMSI“ after “MIN“narrative, step(s) a: replace “MIN; Served MS MIN“ by: “MIN, IMSI; Served MS MIN and IMSI (include allknown)4.24.2figure, step(s) a: add “IMSI“ after “MIN“narrative: no change4.25 R

32、egistrationCancellation 1124.25.1figure, step(s) a and b: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.25.2figure, step(s) a and b: replace “MIN“ by “MSID“narrative: no change4.25.3figure, step(s) a: replace “MIN“ by “MSID“narrative: no change4

33、26 RegistrationNotification 1184.26.1figure, step(s) b: add “MSID,“ after “MYTYP,“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID. Include the identifier (MINor IMSI) used by the MS to access this system.“narrative, step(s) b: after “MYTYP; VLR vendor .“, add “MSID; Serv

34、ed MS MSID (for MIN and IMSI capableMS, the “other“ MS identifier than the one used in the Invoke)“; O“4.26.2figure, step(s) c and d: add “MSID,“ after “MYTYP,“narrative: no change4.26.3no change4.29 RoutingRequest 1294.29.1figure: no changenarrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID

35、 Served MS MSID (last ID received from thisserving system)“4.30 SMSDeliveryBackward 1354.30.1figure, step(s) a and b: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Used to identify the MS“ by “MSID; Used to identify the MS“TIA-75112345678910111213141516171819202122232425262728293031323

36、3343536373839404142434445464748495051525354555657585960- 14 -4.30.2figure, step(s) a and b: replace “MIN“ by “MSID“narrative: no change4.31 SMSDeliveryForward 1394.31.1figure, step(s) a, b: add “IMSI,“ after “MIN,“narrative, step(s) a: replace “MIN; Used to identify the MS.“, by:“MIN,IMSI; Used to i

37、dentify the MS. Include all known. At least one is required.“4.31.2figure, step(s) a, b: add “IMSI,“ after “MIN,“narrative: no change4.32 SMSDeliveryPointToPoint 1434.32.1figure, step(s) a: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN. Include if known.“ by “MSID; Served

38、MS MSID. Include ifavailable.“4.32.2figure, step(s) a: replace “MIN“ by “MSID“narrative: no change4.33 SMSNotification 1474.33.1figure, step(s) a: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Used to identify the MS“ by “MSID; Used to identify the MS“4.33.2figure, step(s) a: replace “M

39、IN“ by “MSID“narrative, step(s) a: replace “MIN; Used to identify the MS“ by “MSID; Used to identify the MS“4.34 SMSRequest 1494.34.1figure, step(s) a, b, and c: replace “MIN“ by “MSID“figure, step(s) d, e, and f: add “, MSID“ after “SMSADDR“narrative, step(s) a: replace “MIN; Used to identify the M

40、S“ by “MSID; Used to identify the MS“narrative, step(s) d: after “SMSADDR“, add “MSID; Identifier that should be used for SMS delivery; O“4.34.2figure, step(s) a, b, and c: replace “MIN“ by “MSID“figure, step(s) d, e, and f: add “, MSID“ after “SMSACCDEN“narrative, step(s) d: after “SMSACCDEN“, add

41、MSID; Identifier that should be used for SMS delivery; O“4.35 TransferToNumberRequest 1534.35.1figure, step(s) a: replace “MIN“ by “MSID“narrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“4.35.2figure, step(s) a: replace “MIN“ by “MSID“narrative: no changeTIA-75112345678910

42、1112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960 - 15 -4.37 UnsolicitedResponse 1584.37.1figure: no changenarrative, step(s) a: replace “MIN; Served MS MIN“ by “MSID; Served MS MSID“5.4.1 Initial Registration with AuthenticationScenario, steps b, d

43、 and f: replace “MIN“ by “MSID“.Scenario, step e. Add sentence “Note that the HLR may replace IMSI, if received as the MSID, by MIN, ifrequired by authentication algorithms.5.4.2 Origination with AuthenticationScenario, steps b, d and f: replace “MIN“ by “MSID“.Scenario, step e. Add sentence “Note t

44、hat the HLR may replace IMSI, if received as the MSID, by MIN, ifrequired by authentication algorithms.5.4.3 Termination with AuthenticationScenario, steps b,c,e and g: replace “MIN“ by “MSID“.Scenario, step f. Add sentence “Note that the HLR may replace IMSI, if received as the MSID, by MIN, ifrequ

45、ired by authentication algorithms.5.4.4 Authentication on Voice Channel OnlyScenario, steps b, d and f: replace “MIN“ by “MSID“.Scenario, step e. Add sentence “Note that the HLR may replace IMSI, if received as the MSID, by MIN, ifrequired by authentication algorithms.5.4.5 Authentication on Flash R

46、equestScenario, step d and f: replace “MIN“ by “MSID“.Scenario, step e. Add sentence to end of first paragraph: “Note that the HLR may replace IMSI, if received as theMSID, by MIN, if required by authentication algorithms.5.4.8 Authentication When SSD is Currently Shared with Another SystemScenario,

47、 step b: replace “MIN“ by “MSID“.Scenario, step b. Add sentence “Note that the HLR may replace IMSI, if received as the MSID, by MIN, ifrequired by authentication algorithms.6.1.2 CD Invocation to an Idle MS on Another MSCScenario, steps d and f: replace “MIN“ by “MSID“.6.8.4 CNIP Interaction with C

48、FUCorrect error in scenario step c: “It includes the MSs MIN directory number in the RedirectingNumberDigitsparameter.“Correct same error in parameter table (also in same step): “Redirecting number digits, set to MSs MIN directorynumber.“6.9.2 CNIR Interaction with CFUCorrect error in scenario step

49、c: “It includes the MSs MIN directory number in the RedirectingNumberDigitsparameter, with an indication that presentation is restricted.“Correct same error in parameter table (also in same step): “Redirecting number digits, incl. presentation restrictioninformation. Set to MSs MIN directory number.“6.8.4 CNIP Interaction with CFUCorrect error in scenario step c: “It includes the MSs MIN directory number in the RedirectingNumberDigitsparameter.Correct same error in parameter table (also in same step): “Redirecting number digits, set to MSs MIN directorynumber.

展开阅读全文
相关资源
猜你喜欢
  • ASTM C1308-1995(2001) Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive Fractional Leaching fro.pdf ASTM C1308-1995(2001) Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive Fractional Leaching fro.pdf
  • ASTM C1308-2008 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive Fractional Leaching from Cyli.pdf ASTM C1308-2008 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive Fractional Leaching from Cyli.pdf
  • ASTM C1308-2008(2017) Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive Fractional Leaching fro.pdf ASTM C1308-2008(2017) Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive Fractional Leaching fro.pdf
  • ASTM C1309-1997(2003) Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors《内置穿过式金属检测器的性能评定的标准规程》.pdf ASTM C1309-1997(2003) Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors《内置穿过式金属检测器的性能评定的标准规程》.pdf
  • ASTM C1309-1997(2012) Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors 《内置穿过式金属探测器性能评估的标准操作规程》.pdf ASTM C1309-1997(2012) Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors 《内置穿过式金属探测器性能评估的标准操作规程》.pdf
  • ASTM C131 C131M-2014 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine《用洛杉机磨耗试验机测定小规格粗集料的抗磨性与抗冲击性的.pdf ASTM C131 C131M-2014 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine《用洛杉机磨耗试验机测定小规格粗集料的抗磨性与抗冲击性的.pdf
  • ASTM C131-2006 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine《用洛杉机磨耗试验机测定小规格粗集料的抗磨性与抗冲击性的标准试验方.pdf ASTM C131-2006 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine《用洛杉机磨耗试验机测定小规格粗集料的抗磨性与抗冲击性的标准试验方.pdf
  • ASTM C1311-2002 Standard Specification for Solvent Release Sealants《溶剂释放器密封剂的标准规范》.pdf ASTM C1311-2002 Standard Specification for Solvent Release Sealants《溶剂释放器密封剂的标准规范》.pdf
  • ASTM C1311-2010 Standard Specification for Solvent Release Sealants《溶剂释放器密封件的标准规范》.pdf ASTM C1311-2010 Standard Specification for Solvent Release Sealants《溶剂释放器密封件的标准规范》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1