1、 TIA STANDARD cdma2000 Wireless IP Network Standard Addendum 1 TIA-835-C-1 (Addendum to TIA-835-C) August 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Telecommunications Industry Association
2、 Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitati
3、ng interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufactu
4、ring or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the Ame
5、rican National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with it
6、s use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4732-RV3-AD1, formulated under the cognizance o
7、f the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of
8、 this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called
9、to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any
10、licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been
11、 complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recom
12、mendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to
13、 any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shal
14、l not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of
15、 compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT
16、 OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF TH
17、E CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA SHALL N
18、OT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE
19、 LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD N
20、OT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-835.1-C-1 Content 1 1 INTRODUCTION . 12 2 GLOSSARY AND DEFINITION 33 4 5 2.1
21、 ACRONYMS. 3 2.2 DEFINITIONS. 5 3 REFERENCES 106 7 8 9 3.1 IETF. 10 3.2 3GPP2 AND TIA. 13 3.3 ITU-T . 13 4 PROTOCOL REFERENCE MODELS. 1510 11 12 13 14 15 4.1 NETWORK REFERENCE MODELS 15 4.2 SIMPLE IP. 16 4.3 MOBILE IP 17 4.4 RADIUS. 20 iCopyright Telecommunications Industry Association Provided by I
22、HS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-835.1-C-1 Figures 1 2 3 4 5 6 7 8 9 10 11 12 13 Figure 1 - Reference Model for Simple IP Access with Fast Handoff. 15 Figure 2 - Reference Model for Mobile IP Access with Fast Handoff . 16
23、 Figure 3 - Protocol Reference Model for Simple IP Access 17 Figure 4 - Protocol Reference Model for Simple IP Access During Fast Handoff 17 Figure 5 - Protocol Reference Model for Mobile IP Control and IKE 18 Figure 6 - Protocol Reference Model for Mobile IP User Data 18 Figure 7 - Protocol Referen
24、ce Model for MIP Control and IKE During Fast Handoff 19 Figure 8 - Protocol Reference Model for MIP User Data During Fast Handoff. 19 Figure 9 - Protocol Reference Model for Signaling for Fast Handoff 20 Figure 10 - Protocol Reference Model for User Data for Fast Handoff. 20 Figure 11 - RADIUS Proto
25、col Reference Model 21 iiCopyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-835.1-C-1 Tables 1 2 Table 1 Revision History .v iiiCopyright Telecommunications Industry Associatio
26、n Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-835.1-C-1 Revision History: 2 Revision Date Comments IS-835 December 2000 Initial Publication IS-835-A May 2001 Added specification or clarification for the following items:
27、 New mechanism for PDSN/HA pre-shared secret distribution for IKE Security status is replaced by IKE Pre-shared Secret Request attribute New counters G15 and G16 for Mobile IP signaling Clarifications with respect to counters G1 and G2 A new indicator in RADIUS stop message to indicate session still
28、 in progress (to avoid release of the IP address) Removal of RADIUS accounting fields H1, I2, and I3 New accounting session to be created when F1, F2 accounting fields vary Non-zero and zero IP address in IP Configuration option in IPCP is treated as Simple IP by PDSN. Mobile IP is supported with nu
29、ll IP address configuration option (i.e., not included). The Active Time attribute format changed from standard RADIUS encoding to 3GPP2 specific encoding. IS-835-B September 2002 This document has been revised to support the following features: Simultaneous multiple service instances concept introd
30、uced. RTP/UDP/IP Header Reduction Schemes Differentiated Services QoS Policy Fast handoff for data call (i.e., tunneled PPP between PDSNs) Dynamic Home Agent allocation with RADIUS Optional support for DNS server address auto configuration in MS Always On support IP Reachability Service with dynamic
31、 DNS update Simple IPv6 Remote address based accounting IS-835-B-1 September, 2004 Bug fixes IS-835-C August 2003 New format: the specification is split into 6 chapters identified by X.S0011.xxx-C, where xxx is the chapter number. Multiple Service Instance support LLAROHC Header Compression and LLA
32、Header Removal Enhanced CRTP as an additional compression scheme Dynamic flow mapping/treatment PrePaid Packet Data service (phase 1) PDSN/HA Resource management Accounting support for 1xEVDV Packet Data Inactivity Timer IKE/IPsec clarifications IP Reachability enhancements Enhancements to Always On
33、 Enhancements to Simple IPv6 ivCopyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-835.1-C-1 Revision Date Comments TIA-835-C-1 May 2005 Bug fixes imported from TIA-835-B-1 Tabl
34、e 1 Revision History1 vCopyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-835.1-C-1 1 Introduction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
35、 30 31 32 33 34 35 36 37 38 This document defines requirements for support of wireless packet data networking capability on a third generation wireless system based on cdma20001. This document supports the services and architecture in 1. This document defines the two methods for accessing public net
36、works (Internet) and private networks (intranets): Simple IP and Mobile IP. It describes the required Quality of Service, Security, Mobility Management, and Accounting capabilities needed to support both methods. IETF protocols are widely employed whenever possible to minimize the number of new prot
37、ocols required and to maximize the utilization of well accepted standards. This document is organized into a series of related chapters, some of which address capabilities common to both IP access service types: Mobile IP and Simple IP, and others may describe capabilities applicable to a specific I
38、P access service. The chapters included in this series are: TIA-835.1-C cdma2000Wireless IP Network Standard: Introduction. TIA-835.2-C cdma2000Wireless IP Network Standard: Simple IP and Mobile IP Access Services. TIA-835.3-C cdma2000Wireless IP Network Standard: Packet Data Mobility and Resource M
39、anagement. TIA-835.4-C cdma2000Wireless IP Network Standard: Quality of Service and Header Reduction. TIA-835.5-C cdma2000Wireless IP Network Standard: Accounting Services and 3GPP2 RADIUS VSAs. TIA-835.6-C cdma2000Wireless IP Network Standard: PrePaid Packet Data Service. A chapter may be referred
40、to by its full designation (e.g., TIA-835.1-C), or by its relative chapter number (e.g., Chapter 1 means TIA-835.1-C, Chapter 2 means TIA-835.2-C, etc.) Chapter 1 This chapter presents an overview of the document content, and contains the complete glossary and definitions applicable to all the chapt
41、ers. It describes the network and protocol reference models for the wireless IP Network entities: PDSN, HA and RADIUS server. Chapter 2 This chapter describes the basic IP access services: Simple IPv4/IPv6 and Mobile IPv4 with Dynamic Home Agent, and Home IP address Assignment. It also addresses the
42、 security requirements between the Wireless IP Network nodes: PDSN, HA and RADIUS servers. The chapter includes other capabilities such as Always On, multiple simultaneous Mobile IPv4 and Simple IPv4/IPv6 packet data session and IP Reachability Service. Chapter 3 This chapter describes packet data i
43、ntra-PDSN, inter-PDSN handoff as well as inter-PDSN fast handoff capabilities and the RN requirements. 1cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. When applied to goods and services, the cdma2000 ma
44、rk certifies their compliance with cdma2000 standards. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA USA) in the United States. 1. Introduction 1Copyright Telecommunications Industry Association Provided by
45、IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-835.1-C-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 The chapter includes mechanisms for PDSN and HA resource management and provisioning of dormancy timers in the RN. Chapter 4 This ch
46、apter describes user Differentiated services capability, multiple service instances, flow mapping and treatment, as well as a detailed description of Link Layer Assisted Robust Header compression and Header Removal treatment to support Voice over IP Service over an auxiliary service instance. Chapte
47、r 5 This chapter describes source IP address and remote IP address based accounting and details procedures required for this series of specifications. It also includes a description of the 3GPP2 RADIUS VSAs required to support this series of specifications. Chapter 6 This chapter describes the PrePa
48、id Packet Data Service for the Wireless IP Network users and includes the PrePaid service architecture, the detailed procedures and the requirements on the Wireless IP Network elements. In this specification, several key words are used to signify the requirements. The key words “shall“, “shall not“, “should“, “should not“, and “may“ are to be interpreted as described in RFC 2119 and the TIA Engineering Style Manual. 1. Introduction 2Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproducti
