1、 TIA STANDARD Recommended Minimum Performance Standards for cdma2000High rate Packet Data Access Terminal TIA-866-A (Revision of TIA-866)January 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright
2、Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between m
3、anufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any mem
4、ber or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are ad
5、opted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address
6、 all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No.
7、 3-4916-RV1-1, formulated under the cognizance of the TIA TR-45.5 Subcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of T
8、IA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. Copyrigh
9、t Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including
10、posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.
11、org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards developmen
12、t or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and p
13、ublished pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claim
14、s of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedure
15、s or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims
16、of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEM
17、ENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF
18、 THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL
19、 INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SU
20、CH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction o
21、r networking permitted without license from IHS-,-,-TIA-866-A CONTENTS i NOTES.xvii 1 NORMATIVE REFERENCES xviii 2 1 Introduction1-1 3 1.1 Scope 1-1 4 1.2 Terms and Definitions .1-1 5 1.2.1 Definitions.1-1 6 1.2.2 Terms1-9 7 1.3 HRPD Equations 1-10 8 1.3.1 Transmit Power of the Sector 1-10 9 1.3.2 R
22、eceived Signal Strength 1-10 10 1.3.2.1 Single-Path Case 1-10 11 1.3.2.2 Two-Path Case . 1-10 12 1.3.2.3 Three-Path Case. 1-11 13 1.4 Tolerances. 1-11 14 1.4.1 HRPD System Parameter Tolerances. 1-11 15 1.4.2 Measurement Tolerances 1-11 16 2 Standard Radiated Emissions Measurement Procedure 2-1 17 2.
23、1 Standard Radiation Test Site .2-1 18 2.2 Search Antenna.2-1 19 2.3 Field-Strength Measurement2-2 20 2.4 Frequency Range of Measurements 2-2 21 2.5 Test Ranges.2-2 22 2.5.1 30-Meter Test Range 2-2 23 2.5.2 3-Meter Test Range2-2 24 2.6 Radiated Signal Measurement Procedures 2-3 25 3 Physical Layer R
24、eceiver Minimum Standards .3-1 26 3.1 Frequency Coverage Requirements.3-1 27 3.2 Demodulation Requirements3-1 28 3.2.1 Demodulation of Forward Traffic Channel in AWGN3-1 29 3.2.1.1 Definition.3-1 30 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for Resal
25、eNo reproduction or networking permitted without license from IHS-,-,-TIA-866-A CONTENTS ii 3.2.1.2 Method of Measurement. 3-1 1 3.2.1.3 . Minimum Standard 3-2 2 3.2.2 Demodulation of Forward Traffic Channel in Multipath Fading Channel 3-3 3 3.2.2.1 Definition 3-3 4 3.2.2.2 Method of Measurement. 3-
26、3 5 3.2.2.3 Minimum Standard 3-4 6 3.2.3 Decision of Power Control Bit for Channels belonging to Different Power 7 Control Sets during Soft Handoff 3-5 8 3.2.3.1 Definition 3-5 9 3.2.3.2 Method of Measurement. 3-5 10 3.2.3.3 Minimum Standard 3-6 11 3.2.4 Decision of Power Control Bit for Channels be
27、longing to the Same Power 12 Control Set 3-7 13 3.2.4.1 Definition 3-7 14 3.2.4.2 Method of Measurement. 3-7 15 3.2.4.3 Minimum Standard 3-8 16 3.2.5 Demodulation of Reverse Power Control Channel during Soft Handoff. 3-8 17 3.2.5.1 Definition 3-8 18 3.2.5.2 Method of Measurement. 3-9 19 3.2.5.3 Mini
28、mum Standard 3-10 20 3.2.6 Demodulation of ARQ Channel 3-11 21 3.2.6.1 Definition 3-11 22 3.2.6.2 Method of Measurement. 3-11 23 3.2.6.3 Minimum Standard 3-11 24 3.2.7 Demodulation of Broadcast Channel 3-12 25 3.2.7.1 Definition 3-12 26 3.2.7.2 Method of Measurement. 3-12 27 3.2.7.3 Minimum Standard
29、 3-14 28 3.3 Receiver Performance 3-14 29 3.3.1 Receiver Sensitivity and Dynamic Range 3-15 30 3.3.1.1 Definition 3-15 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-866
30、-A CONTENTS iii 3.3.1.2 Method of Measurement . 3-15 1 3.3.1.3 Minimum Standard 3-15 2 3.3.2 Single Tone Desensitization 3-16 3 3.3.2.1 Definition. 3-16 4 3.3.2.2 Method of Measurement . 3-16 5 3.3.2.3 Minimum Standard 3-17 6 3.3.3 Intermodulation Spurious Response Attenuation 3-17 7 3.3.3.1 Definit
31、ion. 3-18 8 3.3.3.2 Method of Measurement . 3-18 9 3.3.3.3 Minimum Standard 3-20 10 3.3.4 Adjacent Channel Selectivity 3-20 11 3.3.4.1 Definition. 3-20 12 3.3.4.2 Method of Measurement . 3-20 13 3.3.4.3 Minimum Standard 3-21 14 3.3.5 Receiver Blocking Characteristics. 3-21 15 3.3.5.1 Definition. 3-2
32、1 16 3.3.5.2 Method of Measurement . 3-21 17 3.3.5.3 Minimum Standards 3-23 18 3.4 Limitations on Emissions. 3-23 19 3.4.1 Conducted Spurious Emissions 3-23 20 3.4.1.1 Definition. 3-23 21 3.4.1.2 Method of Measurement . 3-23 22 3.4.1.3 Minimum Standard 3-24 23 3.4.2 Radiated Spurious Emissions. 3-24
33、 24 3.4.2.1 Definition. 3-24 25 3.4.2.2 Method of Measurement . 3-24 26 3.4.2.3 Minimum Standard 3-25 27 4 Physical Layer Transmitter Minimum Standards4-1 28 4.1 Frequency Requirements .4-1 29 4.1.1 Frequency Coverage.4-1 30 4.1.2 Frequency Accuracy.4-1 31 Copyright Telecommunications Industry Assoc
34、iation Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-866-A CONTENTS iv 4.1.2.1 Definition 4-1 1 4.1.2.2 Method of Measurement. 4-1 2 4.1.2.3 Minimum Standard 4-1 3 4.2 Modulation Requirements 4-2 4 4.2.1 Time Reference 4-
35、2 5 4.2.1.1 Definition 4-2 6 4.2.1.2 Method of Measurement. 4-2 7 4.2.1.3 Minimum Standard 4-3 8 4.2.2 Waveform Quality and Frequency Accuracy 4-3 9 4.2.2.1 Definition 4-3 10 4.2.2.2 Method of Measurement. 4-3 11 4.2.2.3 Minimum Standard 4-3 12 4.3 RF Output Power Requirements. 4-4 13 4.3.1 Range of
36、 Open Loop Output Power. 4-4 14 4.3.1.1 Definition 4-4 15 4.3.1.2 Method of Measurement. 4-4 16 4.3.1.3 Minimum Standard 4-5 17 4.3.2 Time Response of Open Loop Power Control . 4-6 18 4.3.2.1 Definition 4-6 19 4.3.2.2 Method of Measurement. 4-6 20 4.3.2.3 Minimum Standard 4-7 21 4.3.3 Range of Close
37、d Loop Power Control. 4-8 22 4.3.3.1 Definition 4-8 23 4.3.3.2 Method of Measurement. 4-8 24 4.3.3.3 Minimum Standard 4-10 25 4.3.4 Maximum RF Output Power. 4-11 26 4.3.4.1 Definition 4-11 27 4.3.4.2 Method of Measurement. 4-11 28 4.3.4.3 Minimum Standard 4-12 29 4.3.5 Minimum Controlled Output Powe
38、r 4-14 30 4.3.5.1 Definition 4-14 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-866-A CONTENTS v 4.3.5.2 Method of Measurement . 4-14 1 4.3.5.3 Minimum Standard 4-14 2
39、4.3.6 Standby Output Power. 4-14 3 4.3.6.1 Definition. 4-14 4 4.3.6.2 Method of Measurement . 4-14 5 4.3.6.3 Minimum Standard 4-15 6 4.3.7 RRI Channel Output Power 4-15 7 4.3.7.1 Definition. 4-15 8 4.3.7.2 Method of Measurement . 4-15 9 4.3.7.3 Minimum Standard 4-16 10 4.3.8 Code Domain Power . 4-16
40、 11 4.3.8.1 DRC Channel Output Power . 4-16 12 4.3.8.1.1 Definition . 4-16 13 4.3.8.1.2 Method of Measurement . 4-16 14 4.3.8.1.3 Minimum Standard 4-17 15 4.3.8.2 ACK Channel Output Power 4-17 16 4.3.8.2.1 Definition . 4-17 17 4.3.8.2.2 Method of Measurement . 4-17 18 4.3.8.2.3 Minimum Standard 4-18
41、 19 4.3.8.3 Data Channel Output Power. 4-18 20 4.3.8.3.1 Definition . 4-18 21 4.3.8.3.2 Method of Measurement . 4-18 22 4.3.8.3.3 Minimum Standard 4-20 23 4.3.8.4 DSC Channel Output Power . 4-23 24 4.3.8.4.1 Definition . 4-23 25 4.3.8.4.2 Method of Measurement . 4-23 26 4.3.8.4.3 Minimum Standard 4-
42、23 27 4.4 Limitations on Emissions. 4-23 28 4.4.1 Conducted Spurious Emissions 4-23 29 4.4.1.1 Definition. 4-23 30 4.4.1.2 Method of Measurement . 4-23 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted wit
43、hout license from IHS-,-,-TIA-866-A CONTENTS vi 4.4.1.3 Minimum Standard 4-24 1 4.4.2 Radiated Spurious Emissions 4-29 2 4.4.3 Occupied Bandwidth . 4-29 3 4.4.3.1 Definition 4-29 4 4.4.3.2 Method of Measurement. 4-29 5 4.4.3.3 Minimum Standard 4-29 6 5 MAC Layer Minimum Standards 5-1 7 5.1 Control C
44、hannel Supervision. 5-1 8 5.1.1 Definition 5-1 9 5.1.2 Method of Measurement 5-1 10 5.1.3 Minimum Standard . 5-2 11 5.2 Data Rate Control Performance . 5-2 12 5.2.1 Definition 5-2 13 5.2.2 Method of Measurement 5-2 14 5.2.3 Minimum Standard . 5-3 15 5.3 Demodulation of Forward Traffic Channel during
45、 Soft Handoff . 5-4 16 5.3.1 Definition 5-4 17 5.3.2 Method of Measurement 5-4 18 5.3.3 Minimum Standard . 5-8 19 5.4 Supervision Procedures in Variable Rate State . 5-8 20 5.4.1 Definition 5-8 21 5.4.2 Method of Measurement 5-9 22 5.4.3 Minimum Standard . 5-9 23 5.5 Access Probes Output Power 5-10
46、24 5.5.1 Definition 5-10 25 5.5.2 Method of Measurement 5-10 26 5.5.3 Minimum Standard . 5-12 27 5.6 Reverse Traffic Channel Initial Transmit Power 5-13 28 5.6.1 Definition 5-13 29 5.6.2 Method of Measurement 5-13 30 5.6.3 Minimum Standard . 5-14 31 Copyright Telecommunications Industry Association
47、Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-866-A CONTENTS vii 5.7 Reverse Traffic Channel Transmit Power 5-15 1 5.7.1 Definition 5-15 2 5.7.2 Method of Measurement. 5-15 3 5.7.3 Minimum Standard 5-19 4 5.8 Reverse Traf
48、fic Channel MAC rate transition probabilities. 5-22 5 5.8.1 Definition 5-22 6 5.8.2 Method of Measurement. 5-22 7 5.8.3 Minimum Standard 5-22 8 5.9 Maximum Traffic-to-Pilot Power Ratio. 5-23 9 5.9.1 Definition 5-23 10 5.9.2 Method of Measurement. 5-23 11 5.9.3 Minimum Standard 5-24 12 6 Connection L
49、ayer Minimum Standards 6-1 13 6.1 Idle Handoff in Continuous Operation Mode .6-1 14 6.1.1 Definition 6-1 15 6.1.2 Method of Measurement.6-1 16 6.1.3 Minimum Standard6-3 17 6.2 Idle Handoff in Slotted Operation Mode 6-4 18 6.2.1 Definition 6-4 19 6.2.2 Method of Measurement.6-4 20 6.2.3 Minimum Standard6-5 21 6.3 Neighbor Set Pil
