1、 TIA-866-D-1E (Addendum to TIA-866-D) April 2014Recommended Minimum Performance Standards for cdma2000High Rate Packet Data Access Terminal NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purc
2、hasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of
3、TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accor
4、dance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems
5、associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for in
6、formation purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company (From Project No. TIA-PN-866-D-1E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA
7、or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued pate
8、nts, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA
9、takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge w
10、hether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative Refe
11、rences to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as de
12、fined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Ma
13、nual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applica
14、tions. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING
15、 WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR
16、THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE
17、CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFIT
18、S, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND T
19、HESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0033-D v2.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Initial publication December 2001 Rev 0 v2.0 Point release January 2004 Rev A v1.0 Revision December 2005 Rev A v2.0 Point release September 200
20、7 Rev B v1.0 Revision May 2008 Rev C v1.0 Relaxing some tests due to AMPS shut down January 2012 Rev D v1.0 Added Japan Radio Law related changes, including BC6 emission, BC3 disband, and BC0 subclasses 2,3 April 2012 Rev D v2.0 Bug fixes. March 2014 3GPP2 C.S0033-D v2.0 CONTENTS i Foreword xix 1 No
21、tes . xx 2 1 Introduction 1-1 3 1.1 Scope 1-1 4 1.1.1 Requirements Terminology 1-1 5 1.2 Terms and Definitions . 1-1 6 1.2.1 Definitions . 1-1 7 1.2.2 Terms 1-10 8 1.3 HRPD Equations . 1-11 9 1.3.1 Transmit Power of the Sector . 1-11 10 1.3.2 Received Signal Strength . 1-12 11 1.3.2.1 Single-Path Ca
22、se 1-12 12 1.3.2.2 Two-Path Case . 1-12 13 1.3.2.3 Three-Path Case 1-12 14 1.4 Tolerances . 1-12 15 1.4.1 HRPD System Parameter Tolerances 1-12 16 1.4.2 Measurement Tolerances . 1-12 17 1.5 References . 1-12 18 2 Standard Radiated Emissions Measurement Procedure . 2-1 19 2.1 Standard Radiation Test
23、Site . 2-1 20 2.2 Search Antenna . 2-1 21 2.3 Field-Strength Measurement . 2-2 22 2.4 Frequency Range of Measurements . 2-2 23 2.5 Test Ranges . 2-2 24 2.5.1 30-Meter Test Range 2-2 25 2.5.2 3-Meter Test Range 2-2 26 2.6 Radiated Signal Measurement Procedures . 2-3 27 3 Physical Layer Receiver Minim
24、um Standards 3-1 28 3.1 Frequency Coverage Requirements 3-1 29 3.2 Demodulation Requirements . 3-1 30 3.2.1 Demodulation of Forward Traffic Channel in AWGN . 3-1 31 3GPP2 C.S0033-D v2.0 CONTENTS ii 3.2.1.1 Definition 3-1 1 3.2.1.2 Method of Measurement 3-1 2 3.2.1.3 Minimum Standard . 3-3 3 3.2.2 De
25、modulation of Forward Traffic Channel in Multipath Fading Channel 3-3 4 3.2.2.1 Definition 3-3 5 3.2.2.2 Method of Measurement 3-4 6 3.2.2.3 Minimum Standard . 3-6 7 3.2.3 Decision of Power Control Bit for Channels belonging to Different Power 8 Control Sets during Soft Handoff 3-6 9 3.2.3.1 Definit
26、ion 3-6 10 3.2.3.2 Method of Measurement 3-6 11 3.2.3.3 Minimum Standard . 3-8 12 3.2.4 Decision of Power Control Bit for Channels belonging to the Same Power 13 Control Set . 3-8 14 3.2.4.1 Definition 3-8 15 3.2.4.2 Method of Measurement 3-8 16 3.2.4.3 Minimum Standard . 3-10 17 3.2.5 Reserved . 3-
27、10 18 3.2.6 Demodulation of ARQ Channel 3-12 19 3.2.6.1 Definition 3-13 20 3.2.6.2 Method of Measurement 3-13 21 3.2.6.3 Minimum Standard . 3-14 22 3.2.7 Demodulation of Broadcast Channel . 3-14 23 3.2.7.1 Definition 3-14 24 3.2.7.2 Method of Measurement 3-14 25 3.2.7.3 Minimum Standard . 3-16 26 3.
28、3 Receiver Performance 3-17 27 3.3.1 Receiver Sensitivity and Dynamic Range . 3-17 28 3.3.1.1 Definition 3-17 29 3.3.1.2 Method of Measurement 3-17 30 3.3.1.3 Minimum Standard . 3-19 31 3.3.2 Single Tone Desensitization . 3-19 32 3GPP2 C.S0033-D v2.0 CONTENTS iii 3.3.2.1 Definition . 3-19 1 3.3.2.2
29、Method of Measurement 3-20 2 3.3.2.3 Minimum Standard 3-23 3 3.3.3 Intermodulation Spurious Response Attenuation . 3-23 4 3.3.3.1 Definition . 3-24 5 3.3.3.2 Method of Measurement 3-24 6 3.3.3.3 Minimum Standard 3-26 7 3.3.4 Adjacent Channel Selectivity 3-26 8 3.3.4.1 Definition . 3-26 9 3.3.4.2 Met
30、hod of Measurement 3-26 10 3.3.4.3 Minimum Standard 3-27 11 3.3.5 Receiver Blocking Characteristics 3-28 12 3.3.5.1 Definition . 3-28 13 3.3.5.2 Method of Measurement 3-28 14 3.3.5.3 Minimum Standards 3-29 15 3.4 Limitations on Emissions 3-29 16 3.4.1 Conducted Spurious Emissions . 3-29 17 3.4.1.1 D
31、efinition . 3-29 18 3.4.1.2 Method of Measurement 3-29 19 3.4.1.3 Minimum Standard 3-30 20 3.4.2 Radiated Spurious Emissions 3-30 21 3.4.2.1 Definition . 3-30 22 3.4.2.2 Method of Measurement 3-31 23 3.4.2.3 Minimum Standard 3-31 24 4 Physical Layer Transmitter Minimum Standards . 4-1 25 4.1 Frequen
32、cy Requirements . 4-1 26 4.1.1 Frequency Coverage . 4-1 27 4.1.2 Frequency Accuracy 4-1 28 4.1.2.1 Definition . 4-1 29 4.1.2.2 Method of Measurement 4-1 30 4.1.2.3 Minimum Standard 4-1 31 3GPP2 C.S0033-D v2.0 CONTENTS iv 4.2 Modulation Requirements . 4-2 1 4.2.1 Time Reference 4-2 2 4.2.1.1 Definiti
33、on 4-2 3 4.2.1.2 Method of Measurement 4-2 4 4.2.1.3 Minimum Standard . 4-3 5 4.2.2 Waveform Quality and Frequency Accuracy . 4-3 6 4.2.2.1 Definition 4-3 7 4.2.2.2 Method of Measurement 4-3 8 4.2.2.3 Minimum Standard . 4-4 9 4.3 RF Output Power Requirements 4-4 10 4.3.1 Range of Open Loop Output Po
34、wer 4-4 11 4.3.1.1 Definition 4-4 12 4.3.1.2 Method of Measurement 4-4 13 4.3.1.3 Minimum Standard . 4-6 14 4.3.2 Time Response of Open Loop Power Control 4-7 15 4.3.2.1 Definition 4-7 16 4.3.2.2 Method of Measurement 4-7 17 4.3.2.3 Minimum Standard . 4-8 18 4.3.3 Range of Closed Loop Power Control
35、4-9 19 4.3.3.1 Definition 4-9 20 4.3.3.2 Method of Measurement 4-9 21 4.3.3.3 Minimum Standard . 4-11 22 4.3.4 Maximum RF Output Power 4-12 23 4.3.4.1 Definition 4-12 24 4.3.4.2 Method of Measurement 4-12 25 4.3.4.3 Minimum Standard . 4-13 26 4.3.5 Minimum Controlled Output Power . 4-15 27 4.3.5.1 D
36、efinition 4-15 28 4.3.5.2 Method of Measurement 4-15 29 4.3.5.3 Minimum Standard . 4-15 30 4.3.6 Standby Output Power 4-15 31 3GPP2 C.S0033-D v2.0 CONTENTS v 4.3.6.1 Definition . 4-15 1 4.3.6.2 Method of Measurement 4-15 2 4.3.6.3 Minimum Standard 4-16 3 4.3.7 RRI Channel Output Power 4-16 4 4.3.7.1
37、 Definition . 4-16 5 4.3.7.2 Method of Measurement 4-16 6 4.3.7.3 Minimum Standard 4-17 7 4.3.8 Code Domain Power . 4-17 8 4.3.8.1 DRC Channel Output Power 4-17 9 4.3.8.1.1 Definition . 4-17 10 4.3.8.1.2 Method of Measurement . 4-18 11 4.3.8.1.3 Minimum Standard 4-18 12 4.3.8.2 ACK Channel Output Po
38、wer . 4-18 13 4.3.8.2.1 Definition . 4-18 14 4.3.8.2.2 Method of Measurement . 4-18 15 4.3.8.2.3 Minimum Standard 4-19 16 4.3.8.3 Data Channel Output Power 4-19 17 4.3.8.3.1 Definition . 4-19 18 4.3.8.3.2 Method of Measurement . 4-19 19 4.3.8.3.3 Minimum Standard 4-22 20 4.3.8.4 DSC Channel Output P
39、ower . 4-24 21 4.3.8.4.1 Definition . 4-24 22 4.3.8.4.2 Method of Measurement . 4-24 23 4.3.8.4.3 Minimum Standard 4-25 24 4.4 Limitations on Emissions 4-25 25 4.4.1 Conducted Spurious Emissions . 4-25 26 4.4.1.1 Definition . 4-25 27 4.4.1.2 Method of Measurement 4-25 28 4.4.1.3 Minimum Standard 4-2
40、7 29 4.4.2 Radiated Spurious Emissions 4-35 30 4.4.3 Occupied Bandwidth . 4-35 31 3GPP2 C.S0033-D v2.0 CONTENTS vi 4.4.3.1 Definition 4-35 1 4.4.3.2 Method of Measurement 4-35 2 4.4.3.3 Minimum Standard . 4-37 3 5 MAC Layer Minimum Standards . 5-1 4 5.1 Control Channel Supervision 5-1 5 5.1.1 Defini
41、tion 5-1 6 5.1.2 Method of Measurement 5-1 7 5.1.3 Minimum Standard . 5-2 8 5.2 Data Rate Control Performance . 5-2 9 5.2.1 Definition 5-2 10 5.2.2 Method of Measurement 5-2 11 5.2.3 Minimum Standard . 5-3 12 5.3 Demodulation of Forward Traffic Channel during Soft Handoff 5-4 13 5.3.1 Definition 5-4
42、 14 5.3.2 Method of Measurement 5-4 15 5.3.3 Minimum Standard . 5-8 16 5.4 Supervision Procedures in Variable Rate State 5-8 17 5.4.1 Definition 5-8 18 5.4.2 Method of Measurement 5-9 19 5.4.3 Minimum Standard . 5-9 20 5.5 Access Probes Output Power . 5-10 21 5.5.1 Definition 5-10 22 5.5.2 Method of
43、 Measurement 5-10 23 5.5.3 Minimum Standard . 5-12 24 5.6 Reverse Traffic Channel Initial Transmit Power . 5-13 25 5.6.1 Definition 5-13 26 5.6.2 Method of Measurement 5-13 27 5.6.3 Minimum Standard . 5-14 28 5.7 Reverse Traffic Channel Transmit Power . 5-15 29 5.7.1 Definition 5-15 30 5.7.2 Method
44、of Measurement 5-15 31 3GPP2 C.S0033-D v2.0 CONTENTS vii 5.7.3 Minimum Standard . 5-20 1 5.8 Reverse Traffic Channel MAC Rate Transition Probabilities 5-22 2 5.8.1 Definition . 5-22 3 5.8.2 Method of Measurement 5-22 4 5.8.3 Minimum Standard . 5-22 5 5.9 Maximum Traffic-to-Pilot Power Ratio 5-23 6 5
45、.9.1 Definition . 5-23 7 5.9.2 Method of Measurement 5-23 8 5.9.3 Minimum Standard . 5-24 9 6 Connection Layer Minimum Standards . 6-1 10 6.1 Idle Handoff in Continuous Operation Mode 6-1 11 6.1.1 Definition . 6-1 12 6.1.2 Method of Measurement 6-1 13 6.1.3 Minimum Standard . 6-3 14 6.2 Idle Handoff
46、 in Slotted Operation Mode . 6-4 15 6.2.1 Definition . 6-4 16 6.2.2 Method of Measurement 6-4 17 6.2.3 Minimum Standard . 6-5 18 6.3 Neighbor Set Pilot Detection and Incorrect Detection in Soft Handoff . 6-6 19 6.3.1 Definition . 6-6 20 6.3.2 Method of Measurement 6-6 21 6.3.3 Minimum Standard . 6-8
47、 22 6.4 Candidate Set Pilot Detection and Incorrect Detection in Soft Handoff . 6-9 23 6.4.1 Definition . 6-9 24 6.4.2 Method of Measurement 6-9 25 6.4.3 Minimum Standard . 6-12 26 6.5 Active Set Pilot Loss Detection in Soft Handoff . 6-12 27 6.5.1 Definition . 6-12 28 6.5.2 Method of Measurement 6-
48、12 29 6.5.3 Minimum Standard . 6-15 30 6.6 Hard Handoff to Another Frequency 6-16 31 3GPP2 C.S0033-D v2.0 CONTENTS viii 6.6.1 Definition 6-16 1 6.6.2 Method of Measurement 6-16 2 6.6.3 Minimum Standard . 6-17 3 7 Environmental Requirements 7-1 4 7.1 Temperature and Power Supply Voltage 7-1 5 7.1.1 D
49、efinition 7-1 6 7.1.2 Method of Measurement 7-1 7 7.1.3 Minimum Standard . 7-2 8 7.2 High Humidity 7-2 9 7.2.1 Definition 7-2 10 7.2.2 Method of Measurement 7-2 11 7.2.3 Minimum Standard . 7-3 12 7.3 Vibration Stability . 7-3 13 7.3.1 Definition 7-3 14 7.3.2 Method of Measurement 7-3 15 7.3.3 Minimum Standard . 7-3 16 7.4 Shock Stability 7-3 17 7.4.1 Definition 7-3 18 7.4.2 Method of Measurement 7-3 19 7.4.3 Minimum Standard . 7-4 20 8 Standard Test Conditions . 8-1 21 8.1 Standard Equipment . 8-1 22 8.1.1 Basic Equipment . 8-1 23 8.1.2 Associated Equipment . 8-1 24 8.2 Standard Envir
