1、 TIA-915-B-1E (Addendum to TIA-915-B) May 2014CDMA Card Application Toolkit (CCAT) NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement o
2、f products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming
3、 to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANS
4、I) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requ
5、irements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN-915-B-1E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no
6、 assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of
7、intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from th
8、e holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which a
9、re instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Documen
10、t or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such
11、reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TI
12、As policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA
13、 of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the D
14、ocument. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROP
15、ERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE R
16、EFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQU
17、ENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAM
18、AGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0035-B v2.0 REVISION HISTORY Revision Description of Changes Date C.S0035-0 v1.0 Initial Release October 2002 C.S0035-A v1.0 First Revision March 2005
19、C.S0035-A v2.0 Second Version of First Revision August 2007 C.S0035-A v3.0 Third Version of First Revision August 2012 C.S0035-B v1.0 Second Revision December 2013 C.S0035-B v2.0 Second Version of Second Revision May 2014 3GPP2 C.S0035-B v2.0 i CONTENTS 1 1 GENERAL 1 2 1.1 Scope . 1 3 1.2 Document C
20、onventions 1 4 2 References . 3 5 2.1 Normative References . 3 6 2.2 Informative References . 4 7 3 Terms 5 8 4 Overview of CCAT . 7 9 4.1 Profile Download 7 10 4.2 Proactive UICC . 7 11 4.3 Data download to UICC 7 12 4.4 Menu selection . 7 13 4.5 Call control by network access application 7 14 4.6
21、MO Short Message Control by UICC 7 15 4.7 Event download 7 16 4.8 Security . 7 17 4.9 Multiple card 7 18 4.10 Timer Expiration 7 19 4.11 Bearer Independent Protocol . 8 20 4.12 Description of the access technology indicator mechanism 8 21 4.13 Tag allocation guidelines. 8 22 5 Profile download. 9 23
22、 5.1 Procedure. 9 24 5.2 Structure and coding of TERMINAL PROFILE 9 25 5.3 Definition of display parameters in Profile download 10 26 6 Proactive UICC . 11 27 6.1 Introduction . 11 28 6.2 Identification of ME support . 11 29 6.3 General procedure 11 30 6.4 Proactive UICC commands and procedures . 11
23、 31 6.4.1 DISPLAY TEXT . 11 32 3GPP2 C.S0035-B v2.0 ii 6.4.2 GET INKEY . 11 1 6.4.3 GET INPUT . 11 2 6.4.4 MORE TIME . 11 3 6.4.5 PLAY TONE 11 4 6.4.6 POLL INTERVAL . 11 5 6.4.7 REFRESH . 11 6 6.4.8 SET UP MENU 11 7 6.4.9 SELECT ITEM 11 8 6.4.10 SEND SHORT MESSAGE 12 9 6.4.11 Reserved . 13 10 6.4.12
24、 SEND USSD . 13 11 6.4.13 SET UP CALL 13 12 6.4.14 POLLING OFF . 13 13 6.4.15 PROVIDE LOCAL INFORMATION 13 14 6.4.16 SET UP EVENT LIST . 14 15 6.4.17 PERFORM CARD APDU 14 16 6.4.18 POWER OFF CARD . 14 17 6.4.19 POWER ON CARD. 14 18 6.4.20 GET READER STATUS 14 19 6.4.21 TIMER MANAGEMENT 14 20 6.4.22
25、SET UP IDLE MODE TEXT 14 21 6.4.23 RUN AT COMMAND 14 22 6.4.24 SEND DTMF . 14 23 6.4.25 LANGUAGE NOTIFICATION 14 24 6.4.26 LAUNCH BROWSER . 14 25 6.4.27 OPEN CHANNEL . 14 26 6.4.28 CLOSE CHANNEL . 14 27 6.4.29 RECEIVE DATA 14 28 6.4.30 SEND DATA 15 29 6.4.31 GET CHANNEL STATUS 15 30 6.4.32 SERVICE S
26、EARCH 15 31 6.4.33 GET SERVICE INFORMATION . 15 32 3GPP2 C.S0035-B v2.0 iii 6.4.34 DECLARE SERVICE 15 1 6.5 Common elements in proactive UICC commands . 15 2 6.6 Structure of proactive UICC commands 15 3 6.6.1 DISPLAY TEXT . 15 4 6.6.2 GET INKEY . 15 5 6.6.3 GET INPUT . 15 6 6.6.4 MORE TIME . 15 7 6
27、.6.5 PLAY TONE 15 8 6.6.6 POLL INTERVAL . 15 9 6.6.7 SET-UP MENU 15 10 6.6.8 SELECT ITEM 16 11 6.6.9 SEND SHORT MESSAGE 16 12 6.6.10 Reserved . 16 13 6.6.11 SEND USSD . 16 14 6.6.12 SET UP CALL 16 15 6.6.13 REFRESH . 16 16 6.6.14 POLLING OFF . 16 17 6.6.15 PROVIDE LOCAL INFORMATION 16 18 6.6.16 SET
28、UP EVENT LIST . 16 19 6.6.17 PERFORM CARD APDU 16 20 6.6.18 POWER OFF CARD . 16 21 6.6.19 POWER ON CARD. 16 22 6.6.20 GET READER STATUS 16 23 6.6.21 TIMER MANAGEMENT 16 24 6.6.22 SET UP IDLE MODE TEXT 17 25 6.6.23 RUN AT COMMAND 17 26 6.6.24 SEND DTMF COMMAND . 17 27 6.6.25 LANGUAGE NOTIFICATION 17
29、28 6.6.26 LAUNCH BROWSER . 17 29 6.6.27 OPEN CHANNEL . 17 30 6.6.28 CLOSE CHANNEL . 17 31 6.6.29 RECEIVE DATA 17 32 3GPP2 C.S0035-B v2.0 iv 6.6.30 SEND DATA 17 1 6.6.31 GET CHANNEL STATUS 17 2 6.6.32 SERVICE SEARCH 17 3 6.6.33 GET SERVICE INFORMATION . 17 4 6.6.34 DECLARE SERVICE 17 5 6.7 Command re
30、sults . 18 6 6.8 Structure of TERMINAL RESPONSE 18 7 6.8.1 Command details 18 8 6.8.2 Device identities . 18 9 6.8.3 Result 18 10 6.8.4 Duration 18 11 6.8.5 Text string 18 12 6.8.6 Item identifier . 18 13 6.8.7 Local information 18 14 6.8.8 Call control requested action . 18 15 6.8.9 Result data obj
31、ect 2 18 16 6.8.10 Card reader status 18 17 6.8.11 Card ATR 18 18 6.8.12 R-APDU 19 19 6.8.13 Timer identifier . 19 20 6.8.14 Timer value 19 21 6.8.15 AT Response . 19 22 6.8.16 Text string 2 . 19 23 6.8.17 Channel data 19 24 6.8.18 Channel status . 19 25 6.8.19 Channel data length . 19 26 6.8.20 Bea
32、rer description 19 27 6.8.21 Buffer size 19 28 6.8.22 Total Display Duration 19 29 6.8.23 Service Availability 19 30 6.8.24 Service Record 19 31 6.9 Proactive UICC session and ME display interaction . 19 32 3GPP2 C.S0035-B v2.0 v 6.10 Handling of unknown, unforeseen and erroneous messages 20 1 6.11
33、Proactive commands versus possible terminal response 20 2 7 ENVELOPE Commands 21 3 7.1 Data Download to UICC 21 4 7.1.1 SMS-PP Data Download 21 5 7.1.1.1 Procedure . 21 6 7.1.1.2 Structure of ENVELOPE (SMS-PP Data Download) . 22 7 7.1.2 Cell Broadcast Data Download 23 8 7.1.2.1 Structure of ENVELOPE
34、 (CELL BROADCAST DOWNLOAD) 23 9 7.2 Menu Selection. 23 10 7.3 Call Control 23 11 7.3.1 Call Control by UICC 23 12 7.3.1.1 Procedure for mobile originated calls . 23 13 7.3.1.2 Procedure for USSD 24 14 7.3.1.3 Indication to be given to the user . 24 15 7.3.1.4 Interaction with Fixed Dialling Number (
35、FDN) 24 16 7.3.1.5 Support of Barred Dialling Number (BDN) service 24 17 7.3.1.6 Structure of ENVELOPE (CALL CONTROL) 24 18 7.3.1.7 MO Short Message Control by UICC 25 19 7.3.1.8 Description . 25 20 7.3.1.9 Structure of ENVELOPE (MO SHORT MESSAGE CONTROL) 25 21 7.3.1.10 Indication to be given to the
36、 user . 27 22 7.3.1.11 Interaction with Fixed Dialing Number (FDN) . 27 23 7.4 Timer Expiration 27 24 7.5 Event download 27 25 7.6 USSD Data Download . 28 26 8 SIMPLE-TLV generic data objects . 29 27 8.1 Address 29 28 8.2 Alpha identifier. 29 29 8.3 Sub-Address 29 30 8.4 Capability Configuration Par
37、ameters . 29 31 8.5 Reserved 29 32 3GPP2 C.S0035-B v2.0 vi 8.6 Command details . 29 1 8.7 Device identities . 29 2 8.8 Duration 29 3 8.9 Item . 29 4 8.10 Item identifier . 29 5 8.11 Response length . 29 6 8.12 Result 30 7 8.13 Reserved 30 8 8.14 Reserved 30 9 8.15 Text string 30 10 8.16 Tone. 30 11
38、8.17 USSD string . 30 12 8.18 File List 30 13 8.19 Location Information 31 14 8.20 Reserved 35 15 8.21 Help Request 35 16 8.22 Network Measurement Results 35 17 8.23 Default Text . 35 18 8.24 Items Next Action Indicator . 35 19 8.25 Event list 35 20 8.26 Cause 35 21 8.27 Location Status 35 22 8.28 T
39、ransaction Identifier . 36 23 8.29 Reserved 36 24 8.30 Call control requested action 36 25 8.31 Icon Identifier . 36 26 8.32 Item Icon Identifier list . 36 27 8.33 Card reader status . 36 28 8.34 Card ATR . 36 29 8.35 C-APDU . 37 30 8.36 R-APDU . 37 31 8.37 Timer identifier . 37 32 3GPP2 C.S0035-B v
40、2.0 vii 8.38 Timer value 37 1 8.39 Date-Time 37 2 8.40 AT Command . 37 3 8.41 AT Response 37 4 8.42 Reserved 37 5 8.43 Immediate response 37 6 8.44 DTMF string . 37 7 8.45 Language . 37 8 8.46 Reserved 37 9 8.47 Browser Identity . 37 10 8.48 URL . 38 11 8.49 Bearer 38 12 8.50 Provisioning File Refer
41、ence . 38 13 8.51 Browser Termination Cause 38 14 8.52 Bearer description 38 15 8.53 Channel data . 38 16 8.54 Channel data length . 38 17 8.55 Buffer size 38 18 8.56 Channel status . 38 19 8.57 Card reader identifier . 38 20 8.58 Other Address 38 21 8.59 UICC/ME interface transport level 38 22 8.60
42、 AID 39 23 8.61 Access Technology 39 24 8.62 Display parameters 39 25 8.63 Service Record 39 26 8.64 Device Filter . 39 27 8.65 Service Search 39 28 8.66 Attribute Information 39 29 8.67 Service Availability . 39 30 8.68 Remote Entity Address . 39 31 8.69 ESN . 39 32 3GPP2 C.S0035-B v2.0 viii 8.70 N
43、etwork access name . 40 1 8.71 CDMA SMS TPDU. 40 2 8.72 Text Attribute . 40 3 8.73 Item Text Attribute List . 40 4 8.74 Reserved 40 5 8.75 Network Search Mode . 40 6 8.76 Battery State 41 7 8.77 Browsing Status . 41 8 8.78 Frame Layout . 41 9 8.79 Frame Information . 41 10 8.80 Frame Identifier 41 1
44、1 8.81 MEID . 41 12 8.82 Multimedia Message Reference . 41 13 8.83 Multimedia Message Identifier 41 14 8.84 Multimedia Message Transfer Status 41 15 8.85 MM Content Identifier. 41 16 8.86 Multimedia Message Notification . 42 17 8.87 Last Envelope . 42 18 8.88 Registry Application Data . 42 19 8.89 A
45、ctivate Descriptor . 42 20 8.90 Broadcast Network Information 42 21 8.91 Contactless state request 42 22 8.92 Contactless functionality state 42 23 8.93 Extended registry application data 42 24 9 Tag values . 43 25 9.1 BER-TLV tags in ME to UICC direction . 43 26 9.2 BER-TLV tags in UICC TO ME direc
46、tion 43 27 9.3 COMPREHENSION-TLV tags in both directions . 43 28 9.4 Type of Command and Next Action Indicator . 43 29 9.5 3GPP2 Tag Values 44 30 10 Allowed Type of command and Device identity combinations . 45 31 11 Security requirements 46 32 3GPP2 C.S0035-B v2.0 ix 12 CDMA2000 Specific Simple TLV
47、 Data Objects . 47 1 3GPP2 C.S0035-B v2.0 x FOREWORD 1 This foreword is not part of this document. 2 This document contains the requirements for CDMA Card Application Toolkit (CCAT). It 3 extends the Card Application Toolkit 11 to enable operation in cdma20002. CCAT is a set of 4 commands and proced
48、ures for use during the network operation phase of CDMA, in addition to 5 those defined in 13. Specifying the interface is to ensure interoperability between a UICC (R-6 UIM or CSIM) and an ME independently of the respective manufacturers and operators. CCAT 7 will allow Service Providers to offer u
49、nique services to their subscribers by placing applications 8 they have designed (or third party applications) on the UICC that would function on any 9 particular manufacturers ME that supports the Toolkit features. 10 These requirements are expressed as additions to current release of 1. The composite CCAT 11 specification is comprised of 1 and this ancillary document. 12 13 14 1 indicates the corresponding document to be cross referenced 2 cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (O
