1、 TIA-98-H-1E April 2014Recommended Minimum Performance Standards for cdma2000Spread Spectrum Mobile Stations NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchang
2、eability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selli
3、ng products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American Nationa
4、l Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all
5、applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not c
6、onstitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-98-H-1E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its presen
7、t or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by on
8、e or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with referenc
9、e to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms
10、 or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published
11、by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Ma
12、nual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essentia
13、l Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or
14、monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND AL
15、L WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AN
16、D MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIAB
17、LE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WH
18、ETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBL
19、ISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0011-E v2.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Initial publication December 1999 Rev A v2.0 Revision April 2001 Rev B v1.0 Revision December 2002 Rev C v1.0 Revision Feburary 2005 Rev C v2.0 Point release March 2006 Rev D
20、v1.0 Adding 1x Rev.E March 2011 Rev E v1.0 Added Japan Radio Law related changes, including BC6 emission, BC3 disband, and BC0 subclasses 2,3 April 2012 Rev E v2.0 Bug fixes. March 2014 3GPP2 C.S0011-E v2.0 CONTENTS i Foreword . xxxix 1 Notes . xli 2 1 INTRODUCTION . 1-1 3 1.1 Scope 1-1 4 1.1.1 Requ
21、irements Terminology 1-1 5 1.2 Terms and Definitions . 1-1 6 1.3 Test Modes 1-18 7 1.4 CDMA Equations 1-19 8 1.4.1 Transmit Power of the Base Station . 1-19 9 1.4.2 Received Signal Strength for Mobile Station Not in Handoff . 1-20 10 1.4.2.1 Single-Path Case . 1-20 11 1.4.2.2 Two-Path Case . 1-22 12
22、 1.4.2.3 Three-Path Case 1-23 13 1.4.3 Received Signal Strength for Mobile Station in Two-Way Handoff 1-24 14 1.5 Tolerances 1-25 15 1.5.1 CDMA System Parameter Tolerances . 1-25 16 1.5.2 Measurement Tolerances . 1-25 17 1.6 Test Requirements for Mobile Stations Supporting Analog Operation 1-25 18 1
23、.6.1 Modulated Tone Frequency . 1-25 19 1.7 References 1-25 20 2 STANDARD RADIATED EMISSIONS MEASUREMENT PROCEDURE . 2-1 21 2.1 Standard Radiation Test Site 2-1 22 2.2 Search Antenna 2-1 23 2.3 Field-Strength Measurement . 2-2 24 2.4 Frequency Range of Measurements . 2-2 25 2.5 Test Ranges 2-2 26 2.
24、5.1 30-Meter Test Range . 2-2 27 2.5.2 3-Meter Test Range . 2-3 28 2.6 Radiated Signal Measurement Procedures 2-3 29 3 CDMA RECEIVER MINIMUM STANDARDS . 3-1 30 3.1 Frequency Coverage Requirements . 3-1 31 3GPP2 C.S0011-E v2.0 CONTENTS ii 3.2 Acquisition Requirements . 3-1 1 3.2.1 Idle Handoff Tests
25、. 3-1 2 3.2.1.1 Idle Handoff in Non-Slotted Mode on the Paging Channel 3-1 3 3.2.1.1.1 Definition 3-1 4 3.2.1.1.2 Method of Measurement 3-1 5 3.2.1.1.3 Minimum Standard . 3-3 6 3.2.1.2 Idle Handoff in Slotted Mode on the Paging Channel . 3-4 7 3.2.1.2.1 Definition 3-4 8 3.2.1.2.2 Method of Measureme
26、nt 3-4 9 3.2.1.2.3 Minimum Standard . 3-6 10 3.2.1.3 Idle Handoff in Slotted Mode on the Forward Common Control 11 Channel 3-6 12 3.2.1.3.1 Definition 3-6 13 3.2.1.3.2 Method of Measurement 3-6 14 3.2.1.3.3 Minimum Standard . 3-8 15 3.2.1.4 Idle Handoff to Another Frequency 3-8 16 3.2.1.4.1 Definiti
27、on 3-8 17 3.2.1.4.2 Method of Measurement 3-9 18 3.2.1.4.3 Minimum Standard . 3-15 19 3.2.2 Soft Handoff Tests . 3-15 20 3.2.2.1 Neighbor Set Pilot Detection and Incorrect Detection in Soft Handoff 3-15 21 3.2.2.1.1 Definition 3-15 22 3.2.2.1.2 Method of Measurement 3-15 23 3.2.2.1.3 Minimum Standar
28、d . 3-19 24 3.2.2.2 Candidate Set Pilot Detection and Incorrect Detection in Soft 25 Handoff . 3-20 26 3.2.2.2.1 Definition 3-20 27 3.2.2.2.2 Method of Measurement 3-20 28 3.2.2.2.3 Minimum Standard . 3-23 29 3.2.2.3 Active Set Pilot Loss Detection in Soft Handoff 3-23 30 3.2.2.3.1 Definition 3-23 3
29、1 3.2.2.3.2 Method of Measurement 3-23 32 3GPP2 C.S0011-E v2.0 CONTENTS iii 3.2.2.3.3 Minimum Standard . 3-26 1 3.2.3 Access and Access Probe Handoff Tests . 3-26 2 3.2.3.1 Access Probe Handoff 3-26 3 3.2.3.1.1 Definition 3-26 4 3.2.3.1.2 Method of Measurement 3-27 5 3.2.3.1.3 Minimum Standard . 3-2
30、9 6 3.2.3.2 Access Handoff 3-29 7 3.2.3.2.1 Definition 3-29 8 3.2.3.2.2 Method of Measurement 3-30 9 3.2.3.2.3 Minimum Standard . 3-32 10 3.2.4 Candidate Frequency Single Search 3-32 11 3.2.4.1 Definition 3-32 12 3.2.4.2 Method of Measurement 3-33 13 3.2.4.3 Minimum Standard . 3-35 14 3.3 Forward Co
31、mmon Channel Demodulation Performance 3-35 15 3.3.1 Demodulation of Non-Slotted Mode Paging Channel 3-35 16 3.3.1.1 Definition 3-35 17 3.3.1.2 Method of Measurement 3-36 18 3.3.1.3 Minimum Standard . 3-36 19 3.3.2 Demodulation of Slotted Mode Paging Channel . 3-37 20 3.3.2.1 Definition 3-37 21 3.3.2
32、.2 Method of Measurement 3-37 22 3.3.2.3 Minimum Standard . 3-38 23 3.3.3 Demodulation of Broadcast Control Channel in AWGN Channel 3-39 24 3.3.3.1 Definition 3-39 25 3.3.3.2 Method of Measurement 3-39 26 3.3.3.3 Minimum Standard . 3-40 27 3.3.4 Demodulation of Broadcast Control Channel in Multipath
33、 Fading 28 Channel 3-40 29 3.3.4.1 Definition 3-40 30 3.3.4.2 Method of Measurement 3-40 31 3.3.4.3 Minimum Standard . 3-41 32 3GPP2 C.S0011-E v2.0 CONTENTS iv 3.3.5 Demodulation of Forward Common Control Channel 3-42 1 3.3.5.1 Definition 3-42 2 3.3.5.2 Method of Measurement 3-42 3 3.3.5.3 Minimum S
34、tandard . 3-43 4 3.3.6 Demodulation of Common Assignment Channel and Reception of 5 Common Power Control Channel 3-43 6 3.3.6.1 Definition 3-43 7 3.3.6.2 Method of Measurement 3-44 8 3.3.6.3 Minimum Standard . 3-45 9 3.3.7 Demodulation of Forward Packet Data Control Channel in Additive White 10 Gaus
35、sian Noise . 3-45 11 3.3.7.1 Definition 3-45 12 3.3.7.2 Method of Measurement 3-46 13 3.3.7.3 Minimum Standard . 3-47 14 3.3.8 Demodulation of Forward Packet Data Control Channel in Soft and 15 Softer Handoff . 3-47 16 3.3.8.1 Definition 3-47 17 3.3.8.2 Method of Measurement 3-48 18 3.3.8.3 Minimum
36、Standard . 3-51 19 3.4 Forward Traffic Channel Demodulation Performance 3-53 20 3.4.1 Demodulation of Forward Fundamental Channel in Additive White 21 Gaussian Noise . 3-53 22 3.4.1.1 Definition 3-53 23 3.4.1.2 Method of Measurement 3-53 24 3.4.1.3 Minimum Standard . 3-54 25 3.4.2 Demodulation of Fo
37、rward Fundamental Channel in Multipath Fading 26 Channel 3-55 27 3.4.2.1 Definition 3-55 28 3.4.2.2 Method of Measurement 3-55 29 3.4.2.3 Minimum Standard . 3-56 30 3.4.3 Demodulation of Forward Fundamental Channel During Soft Handoff 3-57 31 3.4.3.1 Definition 3-57 32 3.4.3.2 Method of Measurement
38、3-57 33 3GPP2 C.S0011-E v2.0 CONTENTS v 3.4.3.3 Minimum Standard . 3-59 1 3.4.4 Decision of Power Control Bit for Channels Belonging to Different Power 2 Control Sets During Soft Handoff 3-59 3 3.4.4.1 Definition 3-59 4 3.4.4.2 Method of Measurement 3-59 5 3.4.4.3 Minimum Standard . 3-61 6 3.4.5 Dec
39、ision of Power Control Bit for Channels Belonging to the Same Power 7 Control Set 3-61 8 3.4.5.1 Definition 3-61 9 3.4.5.2 Method of Measurement 3-61 10 3.4.5.3 Minimum Standard . 3-63 11 3.4.6 Reserved . 3-63 12 3.4.7 Demodulation of Forward Traffic Channel in Multipath Fading Channel 13 with Close
40、d Loop Power Control (FPC_MODE = 000) 3-66 14 3.4.7.1 Definition 3-66 15 3.4.7.2 Method of Measurement 3-66 16 3.4.7.3 Minimum Standard . 3-67 17 3.4.8 Demodulation of Forward Traffic Channel in Multipath Fading Channel 18 with Closed Loop Power Control (FPC_MODE = 010) 3-68 19 3.4.8.1 Definition 3-
41、68 20 3.4.8.2 Method of Measurement 3-68 21 3.4.8.3 Minimum Standard . 3-69 22 3.4.9 Demodulation of Forward Traffic Channel in Multipath Fading Channel 23 with Outer Loop Power Control and Closed Loop Power Control 24 (FPC_MODE = 000, 001 and 010) 3-69 25 3.4.9.1 Definition 3-70 26 3.4.9.2 Method o
42、f Measurement 3-70 27 3.4.9.3 Minimum Standard . 3-72 28 3.4.10 Demodulation of Forward Traffic Channel in Multipath Fading Channel 29 with Closed Loop Power Control (FPC_MODE = 000) and Transmit 30 Diversity (OTD or STS). 3-72 31 3.4.10.1 Definition 3-72 32 3.4.10.2 Method of Measurement 3-72 33 3.
43、4.10.3 Minimum Standard . 3-73 34 3GPP2 C.S0011-E v2.0 CONTENTS vi 3.4.11 Demodulation of Forward Traffic Channel in Multipath Fading Channel 1 with Closed Loop Power Control (FPC_MODE = 010) and Transmit 2 Diversity (OTD or STS) 3-73 3 3.4.11.1 Definition 3-74 4 3.4.11.2 Method of Measurement 3-74
44、5 3.4.11.3 Minimum Standard . 3-75 6 3.4.12 Demodulation of Power Control Subchannel During Reverse Pilot 7 Channel Gating . 3-75 8 3.4.12.1 Definition 3-75 9 3.4.12.2 Method of Measurement 3-75 10 3.4.12.3 Minimum Standard . 3-76 11 3.4.13 Demodulation of Power Control Subchannel During Reverse 12
45、Fundamental Channel Gating . 3-76 13 3.4.13.1 Definition 3-76 14 3.4.13.2 Method of Measurement 3-76 15 3.4.13.3 Minimum Standard . 3-77 16 3.4.14 Demodulation of Forward Packet Data Channel in Additive White 17 Gaussian Noise . 3-77 18 3.4.14.1 Definition 3-77 19 3.4.14.2 Method of Measurement 3-77
46、 20 3.4.14.3 Minimum Standard . 3-78 21 3.4.15 Demodulation of Forward Packet Data Channel in Multipath Fading 22 Channel with no Power Control . 3-78 23 3.4.15.1 Definition 3-78 24 3.4.15.2 Method of Measurement 3-78 25 3.4.15.3 Minimum Standard . 3-79 26 3.4.16 Demodulation of Forward Acknowledgem
47、ent Channel in Additive White 27 Gaussian Noise . 3-79 28 3.4.16.1 Definition 3-79 29 3.4.16.2 Method of Measurement 3-79 30 3.4.16.3 Minimum Standard . 3-80 31 3.4.17 Demodulation of Forward Acknowledgement Channel in Multipath 32 Fading Channel with Closed Loop Power Control (FPC_MODE = 000) 3-80
48、33 3.4.17.1 Definition 3-80 34 3GPP2 C.S0011-E v2.0 CONTENTS vii 3.4.17.2 Method of Measurement 3-80 1 3.4.17.3 Minimum Standard . 3-81 2 3.4.18 Demodulation of Power Control Subchannel During Reverse 3 Fundamental Channel Blanked Frames 3-81 4 3.4.18.1 Definition 3-81 5 3.4.18.2 Method of Measureme
49、nt 3-81 6 3.4.18.3 Minimum Standard . 3-82 7 3.5 Receiver Performance 3-82 8 3.5.1 Receiver Sensitivity and Dynamic Range . 3-82 9 3.5.1.1 Definition 3-82 10 3.5.1.2 Method of Measurement 3-82 11 3.5.1.3 Minimum Standard . 3-83 12 3.5.2 Single Tone Desensitization . 3-83 13 3.5.2.1 Definition 3-83 14 3.5.2.2 Method of Measurement 3-84 15 3.5.2.3 Minimum Standard . 3-86 16 3.5.3 Intermodulation Spurious Response Attenuation 3-86 17 3.5.3.1 Definition 3-86 18 3.5.3.2 Method of Measurement 3-86 19 3.5.3.3 Minimum Standard . 3-90 20 3.5.4 Adjacent Channel Selectivity . 3-9
