TIS 1537-2009 Low-voltage power supply devices d c output-performance characteristics《直流输出的低压供电装置 性能特征》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF P34-302-1994 Roofing products from metal sheet Specification for fully supported roofing products of zinc sheet 《金属板屋面制品 锌板制全支撑屋面制品的标准规范》.pdf

NF P34-401-1977 Roofing Ribbed sheets made from galvanized steel either prelaquered or not Dimensional characteristics 《屋顶 预涂漆或未涂漆镀锌加筋钢板 尺寸特性》.pdf

NF P34-402-1987 Roofing Metal Preformed metallic flashings Requirements 《屋顶 金属 预制金属带 要求》.pdf

NF P34-403-1987 Roofing Metal Metallic cappings Requirements 《屋顶 金属盖板 要求》.pdf

NF P34-411-1983 Roofing materials Corrugated or ribbed aluminium alloy plates 《屋顶 加筋或不加筋铝合金波形板》.pdf

NF P34-501-1975 Continuously prelacquered galvanised steel sheets-tests techniques 《连续预涂漆镀锌钢板 试验技术》.pdf

NF P34-503-1995 Profiled sheeting made of coated or non-coated steel sheet and panels Bending tests under linear loads and or under concentrated loads 《有涂层或无涂层钢制成形板 线性荷载和 或集中荷载下的弯曲.pdf

NF P34-504-1983 Roof covering Aluminium alloy ribbed sheets Static and dynamic bend tests 《屋顶 铝合金加筋板 静力和动力试验》.pdf

NF P34-601-1981 Strips and sheets made from continuous prelacquered aluminium Requirements 《连续预涂漆铝带和铝板 要求》.pdf