TIS 167-1976 Standard for calcium silicate face bricks or sand-lime bricks.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 4628-2013 Aerospace series - Steel X4CrNiMo16-5-1 (1 4418) - Air melted - Hardened and tempered - Bar - De 200 mm - 1150 MPa Rm 1300 MPa German and English version EN 4628 2.pdf

DIN EN 4629-2013 Aerospace series - Steel X4CrNiMo16-5-1 (1 4418) - Air melted - Softened - Forging stock - D 300 mm German and English version EN 4629 2013《航空航天系列 X4CrNiMo16-5-1(1.pdf

DIN EN 4630-2014 de en 7760 Aerospace series - Steel X4CrNiMo16-5-1 (1 4418) - Air melted - Hardened and tempered - Forgings - D e = 200 mm - 900 MPa = R m = 1050 MPa German and En.pdf

DIN EN 4631-2013 Aerospace series - Steel X4CrNiMo16-5-1 (1 4418) - Air melted - Hardened and tempered - Bar - D 200 mm - 900 MPa R 1 050 MPa German and English version EN 4631 201.pdf

DIN EN 4632-001-2009 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001 General requirements German .pdf

DIN EN 4632-002-2009 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002 Homogeneous assemblies alumi.pdf

DIN EN 4632-003-2010 de en 2818 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003 Welding and brazing of homogeneous assemblies of .pdf

DIN EN 4632-004 Berichtigung 1-2014 de 6036 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004 Welding and brazing of homogeneous as.pdf

DIN EN 4632-004-2013 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004 Welding and brazing of homogeneous assemblies of high alloye.pdf