TIS 17020-2013 Conformity assessment requirements for the operation of various types of bodies performing inspection《合格评定 各种检验机构运行的要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS K T3 147-1983 GO plug gauges for holes above 120 to and including 200 mm nominal diameter《GO 钻孔计量器120 到 200 毫米包括200毫米公称口径》.pdf

JUS K T3 148-1983 Segmenta! cylindrical plate NOT GO gauges for holes above 120 to and including 200 mm nominal diameter《部分圆柱板 NOT GO 钻孔计量器 120 到 200 毫米包括200毫米公称口径》.pdf

JUS K T3 149-1983 Spherical NOTGO gauging members for holes above 40 to and including 500mm nominal diameter《球形 NOTGO计量器钻孔大于 40 到500毫米包括500毫米 公称口径》.pdf

JUS K T3 150-1983 Spherical NOT GO plug gauges for holes above 40 to and including 500 mm nominal diameter《球状 NOT GO 螺旋塞计量器孔径大于 40 到 500 毫米 包括500毫米 公称口径》.pdf

JUS K T3 151-1983 Fiat plug gauges GO above 200 to and including 360 mm nominal diameter《Fiat螺旋塞计量器 GO大于 200 到360毫米包括360 毫米 公称口径》.pdf

JUS K T3 152-1983 Fiat plug gauges NO TGO above 200 to and including 360 mm nominal diameter《适用于标称直径为200-360毫米的不过端板状塞规》.pdf

JUS K T3 170-1985 Slats in the threaded part of the threaded gauging members《螺纹规螺纹部分板条》.pdf

JUS K T3 171-1985 GO screvv gauging members for ISO Metric Screw Threads from 1 to and including 50 mm nominal dia- etar《适用于标称直径为1-50毫米（含）的ISO公制螺纹的过端螺纹成员》.pdf

JUS K T3 172-1985 NOT GO screw plug gauges for ISO Metric Screw Threads from 1 to and including 50 mmliorminal diameter《适用于标称直径为1- 50毫米的ISO公制螺纹的不过端螺纹塞规》.pdf