TIS 1844-1999 Terrestrial photovoltaic (PV) power generating systems general and guide《地面用光伏(PV)发电系统 概述和导则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D654-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS SPHERE REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D654-A2)《40%玻璃珠增强的受热稳定的聚酰胺66 与标准FORD WSS-M99P.pdf

FORD WSK-M4D654-A2-2012 POLYAMIDE 66 (PA66) HEAT STABILIZED 40% GLASS SPHERE REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D656-A-2008 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《耐高热 耐高冲击强度丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FO.pdf

FORD WSK-M4D659-A-2014 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND RECYCLED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D660-A-2006 POLYPROPYLENE (PP) COPOLYMER COLOR PIGMENTED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用26%矿物填充的着色型聚丙烯（PP）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 使用WSS.pdf

FORD WSK-M4D660-A2-2006 POLYPROPYLENE (PP) COPOLYMER COLOR PIGMENTED GENERAL PURPOSE MOLDING COMPOUND TO BE USED WITH DORD WSS-M99P1111-A (Shown on WSK-M4D660-A Use WSS-M4D638-B).pdf

FORD WSK-M4D661-A-2010 PVC NBR MOLDING COMPOUND FLEXIBLE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用柔性聚氯乙烯（PVC） 丁腈橡胶（NBR）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D663-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 33% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D673-A)《33%玻璃纤维增强、受热稳定的聚酰胺66 与标准FORD WSS-M99P1.pdf

FORD WSK-M4D664-A-2006 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D993-A)《受热稳定、30%玻璃纤维增强的聚酰胺6成型料 与标准FORD WSS-M99P.pdf