TIS 2215-2005 High-built epoxy paint《厚涂型环氧漆》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 13041-1-2004 Test conditions for numeriaclly controlled turning machines and turning centres - Geometric tests for machines with a horizontal workholding spindle《数控立式车床和旋转中心.pdf

BS ISO 13041-3-2009 Test conditions for numerically controlled turning machines and turning centres - Geometric tests for machines with inverted vertical workholding spindles《数控车床和.pdf

BS ISO 13041-4-2004 Test conditions for numerically controlled turning machines and turning centres - Accuracy and repeatability of positioning of linear and rotary axes《数控立式车床和旋转中.pdf

BS ISO 13041-5-2015 Test conditions for numerically controlled turning machines and turning centres Accuracy of speeds and interpolations《数控旋转机床和旋转中心的试验条件 速度和插补精度》.pdf

BS ISO 13041-6-2009 Test conditions for numerically controlled turning machines and turning centres - Accuracy of a finished test piece《数控车床和车削中心的试验条件 精加工试件的精度》.pdf

BS ISO 13041-7-2004 Test conditions for numerically controlled turning machines and turning centres - Evaluation of contouring performance in the coordinate planes《数控立式车床和转向中心的试验条件.pdf

BS ISO 13041-8-2004 Test conditions for numerically controlled turning machines and turning centres - Evaluation of thermal distortions《数控立式车床和旋转中心的试验条件 热畸变的评价》.pdf

BS ISO 13043-2011 Road vehicles Refrigerant systems used in mobile air conditioning systems (MAC) Safety requirements《道路车辆 移动空调系统(MAC)所使用的制冷系统 安全要求》.pdf

BS ISO 13044-1-2012 Road vehicles 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations General requirements and definitions《道路车辆 重型商用汽车组合用24 V全自动耦.pdf