TIS 222-1996 Hair waving preparations《烫发剂》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 9370-1985 Aerospace tubes classification pressure terms calculation and design criteria《航空和航天 管子 压力术语分类 计算和设计标准》.pdf

DIN 938-2012 Studs - Metal end 1 d《双头螺栓 旋入端（约）1d》.pdf

DIN 939-1995 Studs - Metal end 1 25 d《双头螺栓 旋入端 （约）1 25d》.pdf

DIN 940-2010 Studs - Metal end 2 5 d《双头螺栓 旋入端（约）2 5d》.pdf

DIN 9430-1-1984 Aerospace sampling of semi-finished products in light metals wrought aluminium alloys titanium and titanium alloys general《航空航天 轻金属半成品的取样 锻造铝合金、钛和钛合金 概述》.pdf

DIN 9430-2-1984 Aerospace sampling of semi-finished products in light metals wrought aluminium alloys《航空航天 轻金属半成品的取样 锻造铝合金》.pdf

DIN 9430-3-1984 Aerospace sampling of semi-finished products in light metals titanium and titanium alloys《航空航天 轻金属半成品的取样 钛和钛合金》.pdf

DIN 9462-1987 Aerospace hose assemblies survey《航空航天 软管组件 测量》.pdf

DIN 95-2016 Slotted raised countersunk (oval) head wood screws《开槽沉头(椭圆)木螺钉》.pdf