TIS 2267 2-2006 Low voltage switchgear and controlgear controller device interfaces (cdis) part 2 actuator sensor interface (as i)《低压开关设备和控制设备 控制器 设备接口(CDI) 第2部分 执行器传感器接口(AS-i)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1684-2018 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature&x2014 Cylindrical Rod Strength《环境温度下高级陶瓷抗弯强度的标准试验方法 圆柱杆强度》.pdf

ASTM C1685-2008 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications《工业用途的气动高温纤维隔热的标准规范》.pdf

ASTM C1685-2015 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications《工业应用使用气动高温纤维隔热的标准规格》.pdf

ASTM C1686-2009 Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units《增强热压加气混凝土(AAC)构件的安装和试验标准规程》.pdf

ASTM C1686-2009(2017) Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units《增强热压加气混凝土(AAC)结构安装和试验的标准实施规程》.pdf

ASTM C1688 C1688M-2008 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete《测定新拌透水混凝土的密度和孔隙的标准试验方法》.pdf

ASTM C1688 C1688M-2010 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete《新拌透水混凝土密度和孔隙量标准试验方法》.pdf

ASTM C1688 C1688M-2010a Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete《新拌透水混凝土密度和孔隙量的标准试验方法》.pdf

ASTM C1688 C1688M-2011 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete《新拌透水混凝土密度和孔隙量的标准试验方法》.pdf